[ovs-dev] [PATCH] test-openflowd: Remove.

Sun Oct 23 15:35:35 UTC 2011

No, I'm starting to get bug reports just because users are using
test-openflowd instead of ovs-vswitchd.  I don't want to support that.

For the future, a reasonable approach is to add an ovs-vswitchd mode
that integrates ovsdb-server, so that two separate processes are not
necessary.

On Sun, Oct 23, 2011 at 05:20:20PM +0500, Hassan Khan wrote:
> Hi Ben,
> 
> In my opinion test-openflowd was quite useful specially on embedded
> platforms where some parts of netdev can not be implemented and
> test-openflowd provides a way to test the limited functionality of rest of
> the system. It might be useful to keep test-openflowd and to make it more
> clear to the people who are confused by printing  the message given in the
> readme file (ovs-vswitchd is the most sophisticated...) whenever
> test-openflowd is executed.
> 
> Best,
> Hassan Khan
> 
> On Sat, Oct 22, 2011 at 7:17 AM, <dev-request at openvswitch.org> wrote:
> 
> > Send dev mailing list submissions to
> >        dev at openvswitch.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >        http://openvswitch.org/mailman/listinfo/dev
> > or, via email, send a message with subject or body 'help' to
> >        dev-request at openvswitch.org
> >
> > You can reach the person managing the list at
> >        dev-owner at openvswitch.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of dev digest..."
> >
> >
> > Today's Topics:
> >
> >   1. Re: [PATCH] test-openflowd: Remove. (Ethan Jackson)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 21 Oct 2011 19:16:52 -0700
> > From: Ethan Jackson <ethan at nicira.com>
> > Subject: Re: [ovs-dev] [PATCH] test-openflowd: Remove.
> > To: Ben Pfaff <blp at nicira.com>
> > Cc: dev at openvswitch.org
> > Message-ID:
> >        <CAEruU61WvzbbvjQN-wdwiXfR0-C-2MBdy4PQgabTV7vV7n-h5Q at mail.gmail.com
> > >
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > Looks good.
> >
> > Ethan
> >
> >
> > On Wed, Oct 19, 2011 at 12:37, Ben Pfaff <blp at nicira.com> wrote:
> > > Some users were still confused by its presence.
> > > ---
> > > ?NEWS ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> > > ?PORTING ? ? ? ? ? ? ? ? ? | ? ?5 -
> > > ?tests/.gitignore ? ? ? ? ?| ? ?2 -
> > > ?tests/automake.mk ? ? ? ? | ? 13 -
> > > ?tests/learn.at ? ? ? ? ? ?| ? 13 +-
> > > ?tests/ofproto-dpif.at ? ? | ? 27 ++-
> > > ?tests/ofproto-macros.at ? | ? 22 +--
> > > ?tests/ofproto.at ? ? ? ? ?| ? 28 ++--
> > > ?tests/ovs-ofctl.at ? ? ? ?| ? 16 +-
> > > ?tests/test-openflowd.8.in | ?345 ----------------------------
> > > ?tests/test-openflowd.c ? ?| ?545
> > ---------------------------------------------
> > > ?11 files changed, 46 insertions(+), 971 deletions(-)
> > > ?delete mode 100644 tests/test-openflowd.8.in
> > > ?delete mode 100644 tests/test-openflowd.c
> > >
> > > diff --git a/NEWS b/NEWS
> > > index ff3bc44..cbe29ae 100644
> > > --- a/NEWS
> > > +++ b/NEWS
> > > @@ -26,6 +26,7 @@ Post-v1.2.0
> > > ? ? - Added support for native VLAN tagging. ?A new "vlan_mode"
> > > ? ? ? parameter can be set for "port". Possible values: "access",
> > > ? ? ? "trunk", "native-tagged" and "native-untagged".
> > > + ? ?- test-openflowd has been removed. ?Please use ovs-vswitchd instead.
> > >
> > > ?v1.2.0 - 03 Aug 2011
> > > ?------------------------
> > > diff --git a/PORTING b/PORTING
> > > index a6685d9..5281d50 100644
> > > --- a/PORTING
> > > +++ b/PORTING
> > > @@ -245,11 +245,6 @@ ovs_be64 as fixed-width types in network byte order.
> > ?Each of the
> > > ?latter is equivalent to the one of the former, but the difference in
> > > ?name makes the intended use obvious.
> > >
> > > -ovs-vswitchd is the most sophisticated of ofproto's clients, but
> > > -ofproto can have other clients as well. ?test-openflowd, in the
> > > -"tests" directory, is much simpler than ovs-vswitchd. ?It may be
> > > -easier to initially bring up test-openflowd as part of a port.
> > > -
> > > ?lib/entropy.c assumes that it can obtain high-quality random number
> > > ?seeds at startup by reading from /dev/urandom. ?You will need to
> > > ?modify it if this is not true on your platform.
> > > diff --git a/tests/.gitignore b/tests/.gitignore
> > > index 1454dac..2463eeb 100644
> > > --- a/tests/.gitignore
> > > +++ b/tests/.gitignore
> > > @@ -23,8 +23,6 @@
> > > ?/test-lockfile
> > > ?/test-multipath
> > > ?/test-odp
> > > -/test-openflowd
> > > -/test-openflowd.8
> > > ?/test-ovsdb
> > > ?/test-packets
> > > ?/test-random
> > > diff --git a/tests/automake.mk b/tests/automake.mk
> > > index dcd7f97..1213b79 100644
> > > --- a/tests/automake.mk
> > > +++ b/tests/automake.mk
> > > @@ -141,7 +141,6 @@ valgrind_wrappers = \
> > > ? ? ? ?tests/valgrind/test-lockfile \
> > > ? ? ? ?tests/valgrind/test-multipath \
> > > ? ? ? ?tests/valgrind/test-odp \
> > > - ? ? ? tests/valgrind/test-openflowd \
> > > ? ? ? ?tests/valgrind/test-ovsdb \
> > > ? ? ? ?tests/valgrind/test-packets \
> > > ? ? ? ?tests/valgrind/test-random \
> > > @@ -245,18 +244,6 @@ noinst_PROGRAMS += tests/test-multipath
> > > ?tests_test_multipath_SOURCES = tests/test-multipath.c
> > > ?tests_test_multipath_LDADD = lib/libopenvswitch.a
> > >
> > > -noinst_PROGRAMS += tests/test-openflowd
> > > -EXTRA_DIST += tests/test-openflowd.8.in
> > > -DISTCLEANFILES += tests/test-openflowd.8
> > > -noinst_man_MANS += tests/ovs-openflowd.8
> > > -tests_test_openflowd_SOURCES = tests/test-openflowd.c
> > > -tests_test_openflowd_LDADD = \
> > > - ? ? ? ofproto/libofproto.a \
> > > - ? ? ? lib/libsflow.a \
> > > - ? ? ? lib/libopenvswitch.a \
> > > - ? ? ? $(SSL_LIBS)
> > > -
> > > -
> > > ?noinst_PROGRAMS += tests/test-packets
> > > ?tests_test_packets_SOURCES = tests/test-packets.c
> > > ?tests_test_packets_LDADD = lib/libopenvswitch.a
> > > diff --git a/tests/learn.at b/tests/learn.at
> > > index 1a34b9a..93192ab 100644
> > > --- a/tests/learn.at
> > > +++ b/tests/learn.at
> > > @@ -55,7 +55,10 @@ AT_CHECK([[ovs-ofctl parse-flow
> > 'actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([learning action - standard VLAN+MAC learning])
> > > -OFPROTO_START([--ports=dummy at eth0,dummy at eth1,dummy at eth2])
> > > +OVS_VSWITCHD_START(
> > > + ?[add-port br0 eth0 -- set Interface eth0 type=dummy -- \
> > > + ? add-port br0 eth1 -- set Interface eth1 type=dummy -- \
> > > + ? add-port br0 eth2 -- set Interface eth2 type=dummy])
> > > ?# Set up flow table for VLAN+MAC learning.
> > > ?AT_DATA([flows.txt], [[
> > > ?table=0 actions=learn(table=1, hard_timeout=60, NXM_OF_VLAN_TCI[0..11],
> > NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[]), resubmit(,1)
> > > @@ -64,7 +67,7 @@ table=1 priority=0 actions=flood
> > > ?AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
> > >
> > > ?# Trace an ARP packet arriving on port 3, to create a MAC learning
> > entry.
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
> > -generate], [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
> > -generate], [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0], [Datapath actions: 2,0,1
> > > ?])
> > >
> > > @@ -77,7 +80,7 @@ NXST_FLOW reply:
> > >
> > > ?# Trace a packet arrival destined for the learned MAC.
> > > ?# (This will also learn a MAC.)
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)'
> > -generate], [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)'
> > -generate], [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3
> > > ?])
> > >
> > > @@ -90,7 +93,7 @@ NXST_FLOW reply:
> > > ?])
> > >
> > > ?# Trace a packet arrival that updates the first learned MAC entry.
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
> > -generate], [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
> > -generate], [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3,0,1
> > > ?])
> > >
> > > @@ -101,5 +104,5 @@ AT_CHECK([ovs-ofctl dump-flows br0 table=1 |
> > STRIP_XIDS | STRIP_DURATION | sort]
> > > ?cookie=0x0, duration=?s, table=1, n_packets=0, n_bytes=0, priority=0
> > actions=FLOOD
> > > ?NXST_FLOW reply:
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > > diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
> > > index b5ca08c..0204cda 100644
> > > --- a/tests/ofproto-dpif.at
> > > +++ b/tests/ofproto-dpif.at
> > > @@ -1,7 +1,7 @@
> > > ?AT_BANNER([ofproto-dpif])
> > >
> > > ?AT_SETUP([ofproto-dpif - resubmit])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_DATA([flows.txt], [dnl
> > > ?table=0 in_port=1 priority=1000 icmp
> > actions=output(10),resubmit(2),output(19),resubmit(3),output(21)
> > > ?table=0 in_port=2 priority=1500 icmp
> > actions=output(11),resubmit(,1),output(16),resubmit(2,1),output(18)
> > > @@ -11,15 +11,15 @@ table=1 in_port=2 priority=1500 icmp
> > actions=output(17),resubmit(,2)
> > > ?table=1 in_port=3 priority=1500 icmp actions=output(14),resubmit(,2)
> > > ?])
> > > ?AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0],
> > > ? [Datapath actions: 10,11,12,13,14,15,16,17,18,19,20,21
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto-dpif - registers])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_DATA([flows.txt], [dnl
> > > ?in_port=90 ? ? ? ? ? ? ? ?
> > actions=resubmit:2,resubmit:3,resubmit:4,resubmit:91
> > > ?in_port=91 ? ? ? ? ? ? ? ?
> > actions=resubmit:5,resubmit:6,resubmit:7,resubmit:92
> > > @@ -36,15 +36,15 @@ in_port=10,reg1=0xdeadbeef actions=output:21
> > > ?in_port=11,reg2=0xeef22dea actions=output:22
> > > ?])
> > > ?AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0],
> > > ? [Datapath actions: 20,21,22
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto-dpif - output])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_DATA([flows.txt], [dnl
> > > ?in_port=1
> > actions=resubmit:2,resubmit:3,resubmit:4,resubmit:5,resubmit:6,resubmit:7
> > > ?in_port=2 actions=output:9
> > > @@ -55,15 +55,15 @@ in_port=6
> > actions=output:NXM_NX_REG0[[0..15]],output:NXM_NX_REG0[[16..31]]
> > > ?in_port=7
> > actions=load:0x110000ff->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]]
> > > ?])
> > > ?AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0],
> > > ? [Datapath actions: 9,55,10,55,66,11,77,88
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto-dpif - set_tunnel])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_DATA([flows.txt], [dnl
> > > ?in_port=90
> > actions=resubmit:1,resubmit:2,resubmit:3,resubmit:4,resubmit:5
> > > ?in_port=1 actions=set_tunnel:1,output:1
> > > @@ -73,16 +73,17 @@ in_port=4 actions=set_tunnel:4,set_tunnel:3,output:4
> > > ?in_port=5 actions=set_tunnel:5
> > > ?])
> > > ?AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
> > > -AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0
> > 'tun_id(0x1),in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > +AT_CHECK([ovs-appctl ofproto/trace br0
> > 'tun_id(0x1),in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'],
> > [0], [stdout])
> > > ?AT_CHECK([tail -1 stdout], [0],
> > > ? [Datapath actions: set_tunnel(0x1),1,2,set_tunnel(0x3),3,4
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto-dpif - VLAN handling])
> > > ?OVS_VSWITCHD_START(
> > > - ?[add-port br0 p1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?trunks=10,12 -- \
> > > + ?[set Bridge br0 fail-mode=standalone -- \
> > > + ? add-port br0 p1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?trunks=10,12 -- \
> > > ? ?add-port br0 p2 ? ? ? ? ? ? ? ? ? ? ? ? ? tag=10 ? ? ? ? ? ? ?-- \
> > > ? ?add-port br0 p3 ? ? ? ? ? ? ? ? ? ? ? ? ? tag=12 ? ? ? ? ? ? ?-- \
> > > ? ?add-port br0 p4 ? ? ? ? ? ? ? ? ? ? ? ? ? tag=12 ? ? ? ? ? ? ?-- \
> > > diff --git a/tests/ofproto-macros.at b/tests/ofproto-macros.at
> > > index 229e014..5bc431c 100644
> > > --- a/tests/ofproto-macros.at
> > > +++ b/tests/ofproto-macros.at
> > > @@ -2,26 +2,6 @@ m4_define([STRIP_XIDS], [[sed 's/
> > (xid=0x[0-9a-fA-F]*)//']])
> > > ?m4_define([STRIP_DURATION], [[sed
> > 's/\bduration=[0-9.]*s/duration=?s/']])
> > > ?m4_define([TESTABLE_LOG], [-vPATTERN:ANY:'%c|%p|%m'])
> > >
> > > -m4_define([OFPROTO_START],
> > > - ?[OVS_RUNDIR=$PWD; export OVS_RUNDIR
> > > - ? OVS_LOGDIR=$PWD; export OVS_LOGDIR
> > > - ? trap 'kill `cat test-openflowd.pid`' 0
> > > - ? AT_CAPTURE_FILE([test-openflowd.log])
> > > - ? AT_CHECK(
> > > - ? ? [test-openflowd --detach --pidfile --enable-dummy --log-file
> > --fail=closed dummy at br0 none --datapath-id=fedcba9876543210 $1],
> > > - ? ? [0], [], [stderr])
> > > - ? AT_CHECK([[sed < stderr '
> > > -/vlog|INFO|opened log file/d
> > > -/openflowd|INFO|Open vSwitch version/d
> > > -/openflowd|INFO|OpenFlow protocol version/d
> > > -/ofproto|INFO|using datapath ID/d
> > > -/ofproto|INFO|datapath ID changed to fedcba9876543210/d']])
> > > -])
> > > -
> > > -m4_define([OFPROTO_STOP],
> > > - ?[AT_CHECK([ovs-appctl -t test-openflowd exit])
> > > - ? trap '' 0])
> > > -
> > > ?m4_define([OVS_VSWITCHD_START],
> > > ? [dnl Skip this test if running as root. ?Otherwise ovs-vswitchd will
> > tear
> > > ? ?dnl down any existing datapaths if the kernel module is loaded.
> > > @@ -57,7 +37,7 @@ m4_define([OVS_VSWITCHD_START],
> > > ?/ofproto|INFO|datapath ID changed to fedcba9876543210/d']])
> > >
> > > ? ?dnl Add bridges, ports, etc.
> > > - ? AT_CHECK([ovs-vsctl -- add-br br0 -- set bridge br0
> > datapath-type=dummy other-config:datapath-id=fedcba9876543210 -- $1])
> > > + ? AT_CHECK([ovs-vsctl -- add-br br0 -- set bridge br0
> > datapath-type=dummy other-config:datapath-id=fedcba9876543210
> > other-config:hwaddr=aa:55:aa:55:00:00 fail-mode=secure -- $1])
> > > ?])
> > >
> > > ?m4_define([OVS_VSWITCHD_STOP],
> > > diff --git a/tests/ofproto.at b/tests/ofproto.at
> > > index 66a0650..71cfb14 100644
> > > --- a/tests/ofproto.at
> > > +++ b/tests/ofproto.at
> > > @@ -1,13 +1,13 @@
> > > ?AT_BANNER([ofproto])
> > >
> > > ?AT_SETUP([ofproto - echo request])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -vANY:ANY:WARN probe br0])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto - feature request, config request])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
> > > ?AT_CHECK([STRIP_XIDS stdout], [0], [dnl
> > > ?OFPT_FEATURES_REPLY: ver:0x1, dpid:fedcba9876543210
> > > @@ -18,35 +18,35 @@ features: capabilities:0x87, actions:0xfff
> > > ? ? ?state: ? ? ?LINK_DOWN
> > > ?OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?dnl This is really bare-bones.
> > > ?dnl It at least checks request and reply serialization and
> > deserialization.
> > > ?AT_SETUP([ofproto - port stats])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -vANY:ANY:WARN dump-ports br0], [0], [stdout])
> > > ?AT_CHECK([STRIP_XIDS stdout], [0], [dnl
> > > ?OFPST_PORT reply: 1 ports
> > > ? port 65534: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
> > > ? ? ? ? ? ?tx pkts=0, bytes=0, drop=0, errs=0, coll=0
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?dnl This is really bare-bones.
> > > ?dnl It at least checks request and reply serialization and
> > deserialization.
> > > ?AT_SETUP([ofproto - queue stats])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -vANY:ANY:WARN queue-stats br0], [0], [stdout])
> > > ?AT_CHECK([STRIP_XIDS stdout], [0], [dnl
> > > ?OFPST_QUEUE reply: 0 queues
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto - mod-port])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?for command_config_state in \
> > > ? ? 'up 0 0' \
> > > ? ? 'noflood NO_FLOOD 0' \
> > > @@ -67,11 +67,11 @@ features: capabilities:0x87, actions:0xfff
> > > ?OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
> > > ?])
> > > ?done
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto - basic flow_mod commands (NXM)])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS], [0], [NXST_FLOW reply:
> > > ?])
> > > ?AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl add-flows br0 -])
> > > @@ -89,11 +89,11 @@ NXST_AGGREGATE reply: packet_count=0 byte_count=0
> > flow_count=2
> > > ?AT_CHECK([ovs-ofctl del-flows br0])
> > > ?AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS], [0], [NXST_FLOW reply:
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.0)])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | STRIP_XIDS], [0],
> > [OFPST_FLOW reply:
> > > ?])
> > > ?AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl -F openflow10 add-flows
> > br0 -])
> > > @@ -111,5 +111,5 @@ OFPST_AGGREGATE reply: packet_count=0 byte_count=0
> > flow_count=2
> > > ?AT_CHECK([ovs-ofctl -F openflow10 del-flows br0])
> > > ?AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | STRIP_XIDS], [0],
> > [OFPST_FLOW reply:
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > > diff --git a/tests/ovs-ofctl.at b/tests/ovs-ofctl.at
> > > index 9dcd249..d67c11e 100644
> > > --- a/tests/ovs-ofctl.at
> > > +++ b/tests/ovs-ofctl.at
> > > @@ -488,45 +488,45 @@ dnl (If it doesn't, then either the tun_id won't
> > show up at all, or it will
> > > ?dnl additionally show up as the top 32 bits of the cookie.) ?This checks
> > > ?dnl for regression against bug #4566.
> > > ?AT_SETUP([ovs-ofctl -F option with flow_mods])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -F nxm add-flow br0 tun_id=0x12345678,actions=drop])
> > > ?AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS | STRIP_DURATION], [0],
> > [dnl
> > > ?NXST_FLOW reply:
> > > ?cookie=0x0, duration=?s, table=0, n_packets=0, n_bytes=0,
> > tun_id=0x12345678 actions=drop
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?dnl Check that "-F openflow10" is really honored on dump-flows.
> > > ?dnl (If it isn't, then dump-flows will show the register match.)
> > > ?AT_SETUP([ovs-ofctl dump-flows honors -F option])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl add-flow br0 reg0=0x12345,actions=drop])
> > > ?AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | STRIP_XIDS |
> > STRIP_DURATION], [0], [dnl
> > > ?OFPST_FLOW reply:
> > > ?cookie=0x0, duration=?s, table=0, n_packets=0, n_bytes=0, actions=drop
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?dnl Check that "-F openflow10" fails on dump-flows if the requested
> > match
> > > ?dnl can't be represented in OpenFlow 1.0.
> > > ?AT_SETUP([ovs-ofctl dump-flows rejects bad -F option])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl -F openflow10 dump-flows unix:br0.mgmt
> > reg0=0xabcdef], [1], [],
> > > ? [ovs-ofctl: unix:br0.mgmt: cannot use requested flow format nxm for
> > specified flow
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > >
> > > ?dnl Check that add-flow reports non-normalized flows (feature #5029).
> > > ?AT_SETUP([ovs-ofctl add-flow reports non-normalized flows])
> > > -OFPROTO_START
> > > +OVS_VSWITCHD_START
> > > ?AT_CHECK([ovs-ofctl TESTABLE_LOG add-flow br0 nw_src=1.2.3.4,actions=5],
> > > ? [0], [], [dnl
> > > ?ofp_util|INFO|normalization changed ofp_match, details:
> > > ?ofp_util|INFO| pre: nw_src=1.2.3.4
> > > ?ofp_util|INFO|post: @&t@
> > > ?])
> > > -OFPROTO_STOP
> > > +OVS_VSWITCHD_STOP
> > > ?AT_CLEANUP
> > > diff --git a/tests/test-openflowd.8.in b/tests/test-openflowd.8.in
> > > deleted file mode 100644
> > > index 135ba84..0000000
> > > --- a/tests/test-openflowd.8.in
> > > +++ /dev/null
> > > @@ -1,345 +0,0 @@
> > > -.TH test\-openflowd 8 "March 2009" "Open vSwitch" "Open vSwitch Manual"
> > > -.\" This program's name:
> > > -.ds PN test\-openflowd
> > > -.\" SSL peer program's name:
> > > -.ds SN ovs\-controller
> > > -.
> > > -.SH NAME
> > > -test\-openflowd \- OpenFlow switch implementation
> > > -.
> > > -.SH SYNOPSIS
> > > -.B test\-openflowd
> > > -[\fIoptions\fR] \fIdatapath\fR \fIcontroller\fR\&...
> > > -.
> > > -.SH DESCRIPTION
> > > -The \fBtest\-openflowd\fR program implements an OpenFlow switch using a
> > > -flow-based datapath. ?\fBtest\-openflowd\fR connects to one or more
> > > -OpenFlow controllers over TCP or SSL.
> > > -.PP
> > > -For a more powerful alternative to \fBtest\-openflowd\fR, see
> > > -\fBovs\-vswitchd\fR(8). ?Do not run both daemons at the same time.
> > > -.PP
> > > -The mandatory \fIdatapath\fR argument argument specifies the local
> > > -datapath to relay. ?It takes the form [\fItype\fB@\fR]\fIname\fR,
> > > -where \fIname\fR is the network device associated with the datapath's
> > > -local port. ?If \fItype\fR is given, it specifies the datapath
> > > -provider of \fIname\fR, otherwise the default provider \fBsystem\fR is
> > > -assumed.
> > > -.
> > > -.PP
> > > -The optional \fIcontroller\fR arguments specify how to connect to the
> > > -OpenFlow controller or controllers. ?Each takes one of the following
> > > -forms:
> > > -.
> > > -.so lib/vconn-active.man
> > > -.IP "\fBnone\fR"
> > > -Run without actively maintaining a connection to a remote OpenFlow
> > > -controller. ?(See the \fB\-\-listen\fR option, under \fBNetworking
> > > -Options\fR below, for another way to make OpenFlow connections to the
> > > -switch.)
> > > -.
> > > -.PP
> > > -When multiple controllers are configured, \fBtest\-openflowd\fR
> > > -connects to all of them simultaneously. ?OpenFlow 1.0 does not specify
> > > -how multiple controllers coordinate in interacting with a single
> > > -switch, so more than one controller should be specified only if the
> > > -controllers are themselves designed to coordinate with each other.
> > > -(The Nicira-defined \fBNXT_ROLE\fR OpenFlow vendor extension may be
> > > -useful for this.)
> > > -.
> > > -.SS "Contacting Controllers"
> > > -The OpenFlow switch must be able to contact the OpenFlow controllers
> > > -over the network. ?It can do so in one of two ways:
> > > -.
> > > -.IP out-of-band
> > > -In this configuration, OpenFlow traffic uses a network separate from
> > > -the data traffic that it controls, that is, the switch does not use
> > > -any of the network devices added to the datapath with \fBovs\-dpctl
> > > -add\-if\fR in its communication with the controller.
> > > -.IP
> > > -To use \fBtest\-openflowd\fR in a network with out-of-band control,
> > specify
> > > -\fB\-\-out\-of\-band\fR on the \fBtest\-openflowd\fR command line. ?The
> > control
> > > -network must be configured separately, before or after
> > \fBtest\-openflowd\fR
> > > -is started.
> > > -.
> > > -.IP in-band
> > > -In this configuration, a single network is used for OpenFlow traffic
> > > -and other data traffic, that is, the switch contacts the controller
> > > -over one of the network devices added to the datapath with \fBovs\-dpctl
> > > -add\-if\fR. ?This configuration is often more convenient than
> > > -out-of-band control, because it is not necessary to maintain two
> > > -independent networks.
> > > -.IP
> > > -In-band control is the default for \fBtest\-openflowd\fR, so no special
> > > -command-line option is required.
> > > -
> > > -Specify the location of the
> > > -controller on the \fBtest\-openflowd\fR command line as the
> > \fIcontroller\fR
> > > -argument. ?You must also configure the network device for the OpenFlow
> > > -``local port'' to allow \fBtest\-openflowd\fR to connect to that
> > controller.
> > > -The OpenFlow local port is a virtual network port that
> > \fBtest\-openflowd\fR
> > > -bridges to the physical switch ports. ?The name of the local port for
> > > -a given \fIdatapath\fR may be seen by running \fBovs\-dpctl show
> > > -\fIdatapath\fR; the local port is listed as port 0 in \fBshow\fR's
> > > -output.
> > > -.
> > > -.IP
> > > -Before \fBtest\-openflowd\fR starts, the local port network device is
> > not
> > > -bridged to any physical network, so the next step depends on whether
> > > -connectivity is required to configure the device's IP address. ?If the
> > > -switch has a static IP address, you may configure its IP address now
> > > -with a command such as
> > > -.B ifconfig of0 192.168.1.1
> > > -and then invoke \fBtest\-openflowd\fR.
> > > -.IP
> > > -On the other hand, if the switch does not have a static IP address,
> > > -e.g. it obtains its IP address dynamically via DHCP, the DHCP client
> > > -will not be able to contact the DHCP server until the OpenFlow switch
> > > -has started up. ?Thus, start \fBtest\-openflowd\fR without configuring
> > > -the local port network device, and start the DHCP client afterward.
> > > -.RE
> > > -.
> > > -.SH OPTIONS
> > > -.SS "OpenFlow Options"
> > > -.TP
> > > -\fB\-\-datapath\-id=\fIdpid\fR
> > > -Sets \fIdpid\fR, which must consist of exactly 16 hexadecimal digits
> > > -and may not be all-zero,
> > > -as the datapath ID that the switch will use to identify itself to
> > > -OpenFlow controllers.
> > > -.IP
> > > -If this option is omitted, the default datapath ID is taken from the
> > > -Ethernet address of the datapath's local port (which is typically
> > > -randomly generated) in the lower 48 bits and zeros in the upper 16.
> > > -.
> > > -.TP
> > > -\fB\-\-mfr\-desc=\fIdesc\fR
> > > -Set the description of the switch's manufacturer to \fIdesc\fR, which
> > > -may contain up to 255 ASCII characters.
> > > -.
> > > -.TP
> > > -\fB\-\-hw\-desc=\fIdesc\fR
> > > -Set the description of the switch's hardware revision to \fIdesc\fR,
> > which
> > > -may contain up to 255 ASCII characters.
> > > -.
> > > -.TP
> > > -\fB\-\-sw\-desc=\fIdesc\fR
> > > -Set the description of the switch's software revision to \fIdesc\fR,
> > which
> > > -may contain up to 255 ASCII characters.
> > > -.
> > > -.TP
> > > -\fB\-\-serial\-desc=\fIdesc\fR
> > > -Set the description of the switch's serial number to \fIdesc\fR, which
> > > -may contain up to 31 ASCII characters.
> > > -.
> > > -.TP
> > > -\fB\-\-dp\-desc=\fIdesc\fR
> > > -Set the description of the datapath to \fIdesc\fR, which may contain up
> > to
> > > -255 ASCII characters. ?Note that this field is intended for debugging
> > > -purposes and is not guaranteed to be unique and should not be used as
> > > -the primary identifier of the datapath.
> > > -.
> > > -.SS "Networking Options"
> > > -.TP
> > > -\fB\-\-datapath\-id=\fIdpid\fR
> > > -Sets \fIdpid\fR, which must consist of exactly 16 hexadecimal digits,
> > > -as the datapath ID that the switch will use to identify itself to the
> > > -OpenFlow controller.
> > > -.IP
> > > -If this option is omitted, the default datapath ID is taken from the
> > > -Ethernet address of the datapath's local port (which is typically
> > > -randomly generated) in the lower 48 bits and zeros in the upper 16.
> > > -.
> > > -.TP
> > > -\fB\-\-fail=\fR[\fBstandalone\fR|\fBsecure\fR]
> > > -The controller is, ordinarily, responsible for setting up all flows on
> > > -the OpenFlow switch. ?Thus, if the connection to the controller fails,
> > > -no new network connections can be set up. ?If the connection to the
> > > -controller stays down long enough, no packets can pass through the
> > > -switch at all.
> > > -.IP
> > > -If this option is set to \fBstandalone\fR (the default),
> > > -\fBtest\-openflowd\fR will
> > > -take over responsibility for setting up flows in the local datapath
> > > -when no message has been received from the controller for three times
> > > -the inactivity probe interval (see below), or 45 seconds by default.
> > > -In this ``fail open'' mode, \fBtest\-openflowd\fR causes the datapath to
> > act
> > > -like an ordinary MAC-learning switch. ?\fBtest\-openflowd\fR will
> > continue to
> > > -retry connection to the controller in the background and, when the
> > > -connection succeeds, it discontinues its standalone switching behavior.
> > > -.IP
> > > -If this option is set to \fBsecure\fR, then \fBtest\-openflowd\fR will
> > not
> > > -set up flows on its own when the controller connection fails.
> > > -.
> > > -.TP
> > > -\fB\-\-inactivity\-probe=\fIsecs\fR
> > > -When the OpenFlow switch is connected to the controller, the
> > > -switch waits for a message to be received from the controller for
> > > -\fIsecs\fR seconds before it sends a inactivity probe to the
> > > -controller. ?After sending the inactivity probe, if no response is
> > > -received for an additional \fIsecs\fR seconds, the switch
> > > -assumes that the connection has been broken and attempts to reconnect.
> > > -The default and the minimum value are both 5 seconds.
> > > -.IP
> > > -When fail-open mode is configured, changing the inactivity probe
> > > -interval also changes the interval before entering fail-open mode (see
> > > -above).
> > > -.
> > > -.TP
> > > -\fB\-\-max\-idle=\fIsecs\fR|\fBpermanent\fR
> > > -Sets \fIsecs\fR as the number of seconds that a flow set up by the
> > > -OpenFlow switch will remain in the switch's flow table without any
> > > -matching packets being seen. ?If \fBpermanent\fR is specified, which
> > > -is not recommended, flows set up by the switch will never
> > > -expire. ?The default is 15 seconds.
> > > -.IP
> > > -Most flows are set up by the OpenFlow controller, not by the
> > > -switch. ?This option affects only the following flows, which the
> > > -OpenFlow switch sets up itself:
> > > -.
> > > -.RS
> > > -.IP \(bu
> > > -When \fB\-\-fail=open\fR is specified, flows set up when the
> > > -switch has not been able to contact the controller for the configured
> > > -fail-open delay.
> > > -.
> > > -.IP \(bu
> > > -When in-band control is in use, flows set up to bootstrap contacting
> > > -the controller (see \fBContacting the Controller\fR, above, for
> > > -more information about in-band control).
> > > -.RE
> > > -.
> > > -.IP
> > > -As a result, when both \fB\-\-fail=secure\fR and \fB\-\-out\-of\-band\fR
> > are
> > > -specified, this option has no effect.
> > > -.
> > > -.TP
> > > -\fB\-\-max\-backoff=\fIsecs\fR
> > > -Sets the maximum time between attempts to connect to the controller to
> > > -\fIsecs\fR, which must be at least 1. ?The actual interval between
> > > -connection attempts starts at 1 second and doubles on each failing
> > > -attempt until it reaches the maximum. ?The default maximum backoff
> > > -time is 8 seconds.
> > > -.
> > > -.TP
> > > -\fB\-l\fR, \fB\-\-listen=\fImethod\fR
> > > -By default, the switch listens for OpenFlow management connections on a
> > > -Unix domain socket named \fB at RUNDIR@/\fIdatapath\fB.mgmt\fR. ?This
> > socket
> > > -can be used to perform local OpenFlow monitoring and administration with
> > > -tools such as \fBovs\-ofctl\fR.
> > > -.IP
> > > -This option may be used to override the default listener. ?The
> > \fImethod\fR
> > > -must be given as one of the passive OpenFlow connection methods listed
> > > -below. ?This option may be specified multiple times to listen to
> > > -multiple connection methods. ?If a single \fImethod\fR of \fBnone\fR is
> > > -used, no listeners will be created.
> > > -.
> > > -.RS
> > > -.so lib/vconn-passive.man
> > > -.RE
> > > -.
> > > -.TP
> > > -\fB\-\-snoop=\fImethod\fR
> > > -Configures the switch to additionally listen for incoming OpenFlow
> > > -connections for controller connection snooping. ?The \fImethod\fR must
> > > -be given as one of the passive OpenFlow connection methods listed
> > > -under the \fB\-\-listen\fR option above. ?This option may be specified
> > > -multiple times to listen to multiple connection methods.
> > > -.IP
> > > -If \fBovs\-ofctl monitor\fR is used to connect to \fImethod\fR specified
> > on
> > > -\fB\-\-snoop\fR, it will display all the OpenFlow messages traveling
> > > -between the switch and its controller on the primary OpenFlow
> > > -connection. ?This can be useful for debugging switch and controller
> > > -problems.
> > > -.
> > > -.TP
> > > -\fB\-\-in\-band\fR, \fB\-\-out\-of\-band\fR
> > > -Configures \fBtest\-openflowd\fR to operate in in-band or out-of-band
> > control
> > > -mode (see \fBContacting the Controller\fR above). ?When neither option
> > > -is given, the default is in-band control.
> > > -.
> > > -.TP
> > > -\fB\-\-netflow=\fIip\fB:\fIport\fR
> > > -Configures the given UDP \fIport\fR on the specified IP \fIip\fR as
> > > -a recipient of NetFlow messages for expired flows. ?The \fIip\fR must
> > > -be specified numerically, not as a DNS name.
> > > -.IP
> > > -This option may be specified multiple times to configure additional
> > > -NetFlow collectors.
> > > -.
> > > -.SS "Rate-Limiting Options"
> > > -.
> > > -These options configure how the switch applies a ``token bucket'' to
> > > -limit the rate at which packets in unknown flows are forwarded to an
> > > -OpenFlow controller for flow-setup processing. ?This feature prevents
> > > -a single OpenFlow switch from overwhelming a controller.
> > > -.
> > > -.TP
> > > -\fB\-\-rate\-limit\fR[\fB=\fIrate\fR]
> > > -.
> > > -Limits the maximum rate at which packets will be forwarded to the
> > > -OpenFlow controller to \fIrate\fR packets per second. ?If \fIrate\fR
> > > -is not specified then the default of 1,000 packets per second is used.
> > > -.IP
> > > -If \fB\-\-rate\-limit\fR is not used, then the switch does not limit the
> > > -rate at which packets are forwarded to the controller.
> > > -.
> > > -.TP
> > > -\fB\-\-burst\-limit=\fIburst\fR
> > > -.
> > > -Sets the maximum number of unused packet credits that the switch will
> > > -allow to accumulate during time in which no packets are being
> > > -forwarded to the OpenFlow controller to \fIburst\fR (measured in
> > > -packets). ?The default \fIburst\fR is one-quarter of the \fIrate\fR
> > > -specified on \fB\-\-rate\-limit\fR.
> > > -.
> > > -This option takes effect only when \fB\-\-rate\-limit\fR is also
> > specified.
> > > -.
> > > -.SS "Datapath Options"
> > > -.
> > > -.IP "\fB\-\-ports=\fIport\fR[\fB,\fIport\fR...]"
> > > -Ordinarily, \fBtest\-openflowd\fR expects the administrator to create
> > > -the specified \fIdatapath\fR and add ports to it externally with a
> > > -utility such as \fBovs\-dpctl\fR. ?However, the userspace switch
> > > -datapath is implemented inside \fBtest\-openflowd\fR itself and does
> > > -not (currently) have any external interface for \fBovs\-dpctl\fR to
> > > -access. ?As a stopgap measure, this option specifies one or more ports
> > > -to add to the datapath at \fBtest\-openflowd\fR startup time. ?Multiple
> > > -ports may be specified as a comma-separated list or by specifying
> > > -\fB\-\-ports\fR multiple times.
> > > -.IP
> > > -See \fBINSTALL.userspace\fR for more information about userspace
> > > -switching.
> > > -.
> > > -.SS "Daemon Options"
> > > -.so lib/daemon.man
> > > -.
> > > -.SS "Public Key Infrastructure Options"
> > > -.so lib/ssl.man
> > > -.so lib/ssl-bootstrap.man
> > > -.
> > > -.SS "Logging Options"
> > > -.so lib/vlog.man
> > > -.SS "Other Options"
> > > -.so lib/unixctl.man
> > > -.so lib/common.man
> > > -.so lib/leak-checker.man
> > > -.
> > > -.SH "RUNTIME MANAGEMENT COMMANDS"
> > > -\fBovs\-appctl\fR(8) can send commands to a running
> > > -\fBtest\-openflowd\fR process. ?The currently supported commands are
> > > -described below.
> > > -.SS "TEST\-OPENFLOWD COMMANDS"
> > > -These commands are specific to \fBtest\-openflowd\fR.
> > > -.IP "\fBexit\fR"
> > > -Causes \fBtest\-openflowd\fR to gracefully terminate.
> > > -.so ofproto/ofproto-unixctl.man
> > > -.so lib/vlog-unixctl.man
> > > -.
> > > -.SH "SEE ALSO"
> > > -.
> > > -.BR ovs\-appctl (8),
> > > -.BR ovs\-controller (8),
> > > -.BR ovs\-dpctl (8),
> > > -.BR ovs\-ofctl (8),
> > > -.BR ovs\-pki (8)
> > > diff --git a/tests/test-openflowd.c b/tests/test-openflowd.c
> > > deleted file mode 100644
> > > index 4cd9312..0000000
> > > --- a/tests/test-openflowd.c
> > > +++ /dev/null
> > > @@ -1,545 +0,0 @@
> > > -/*
> > > - * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks.
> > > - *
> > > - * Licensed under the Apache License, Version 2.0 (the "License");
> > > - * you may not use this file except in compliance with the License.
> > > - * You may obtain a copy of the License at:
> > > - *
> > > - * ? ? http://www.apache.org/licenses/LICENSE-2.0
> > > - *
> > > - * Unless required by applicable law or agreed to in writing, software
> > > - * distributed under the License is distributed on an "AS IS" BASIS,
> > > - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> > implied.
> > > - * See the License for the specific language governing permissions and
> > > - * limitations under the License.
> > > - */
> > > -
> > > -#include <config.h>
> > > -#include <assert.h>
> > > -#include <errno.h>
> > > -#include <getopt.h>
> > > -#include <inttypes.h>
> > > -#include <netinet/in.h>
> > > -#include <stdlib.h>
> > > -#include <signal.h>
> > > -#include <string.h>
> > > -
> > > -#include "command-line.h"
> > > -#include "compiler.h"
> > > -#include "daemon.h"
> > > -#include "dirs.h"
> > > -#include "dummy.h"
> > > -#include "leak-checker.h"
> > > -#include "list.h"
> > > -#include "netdev.h"
> > > -#include "ofpbuf.h"
> > > -#include "ofproto/ofproto.h"
> > > -#include "openflow/openflow.h"
> > > -#include "packets.h"
> > > -#include "poll-loop.h"
> > > -#include "rconn.h"
> > > -#include "stream-ssl.h"
> > > -#include "timeval.h"
> > > -#include "unixctl.h"
> > > -#include "util.h"
> > > -#include "vconn.h"
> > > -#include "vlog.h"
> > > -
> > > -VLOG_DEFINE_THIS_MODULE(openflowd);
> > > -
> > > -/* Settings that may be configured by the user. */
> > > -struct ofsettings {
> > > - ? ?const char *unixctl_path; ? /* File name for unixctl socket. */
> > > -
> > > - ? ?/* Controller configuration. */
> > > - ? ?struct ofproto_controller *controllers;
> > > - ? ?size_t n_controllers;
> > > - ? ?enum ofproto_fail_mode fail_mode;
> > > - ? ?bool run_forever; ? ? ? ? ? /* Continue running even with no
> > controller? */
> > > -
> > > - ? ?/* Datapath. */
> > > - ? ?uint64_t datapath_id; ? ? ? /* Datapath ID. */
> > > - ? ?char *dp_name; ? ? ? ? ? ? ?/* Name of local datapath. */
> > > - ? ?char *dp_type; ? ? ? ? ? ? ?/* Type of local datapath. */
> > > - ? ?struct sset ports; ? ? ? ? ?/* Set of ports to add to datapath (if
> > any). */
> > > -
> > > - ? ?/* Description strings. */
> > > - ? ?const char *mfr_desc; ? ? ? /* Manufacturer. */
> > > - ? ?const char *hw_desc; ? ? ? ?/* Hardware. */
> > > - ? ?const char *sw_desc; ? ? ? ?/* Software version. */
> > > - ? ?const char *serial_desc; ? ?/* Serial number. */
> > > - ? ?const char *dp_desc; ? ? ? ?/* Datapath description. */
> > > -
> > > - ? ?/* Related vconns and network devices. */
> > > - ? ?struct sset snoops; ? ? ? ? ?/* Listen for controller snooping
> > conns. */
> > > -
> > > - ? ?/* Failure behavior. */
> > > - ? ?int max_idle; ? ? ? ? ? ? /* Idle time for flows in fail-open mode.
> > */
> > > -
> > > - ? ?/* NetFlow. */
> > > - ? ?struct sset netflow; ? ? ? ?/* NetFlow targets. */
> > > -};
> > > -
> > > -static unixctl_cb_func test_openflowd_exit;
> > > -
> > > -static void parse_options(int argc, char *argv[], struct ofsettings *);
> > > -static void usage(void) NO_RETURN;
> > > -
> > > -int
> > > -main(int argc, char *argv[])
> > > -{
> > > - ? ?struct unixctl_server *unixctl;
> > > - ? ?struct ofproto *ofproto;
> > > - ? ?struct ofsettings s;
> > > - ? ?int error;
> > > - ? ?struct netflow_options nf_options;
> > > - ? ?const char *port;
> > > - ? ?bool exiting;
> > > -
> > > - ? ?proctitle_init(argc, argv);
> > > - ? ?set_program_name(argv[0]);
> > > - ? ?parse_options(argc, argv, &s);
> > > - ? ?signal(SIGPIPE, SIG_IGN);
> > > -
> > > - ? ?daemonize_start();
> > > -
> > > - ? ?/* Start listening for ovs-appctl requests. */
> > > - ? ?error = unixctl_server_create(s.unixctl_path, &unixctl);
> > > - ? ?if (error) {
> > > - ? ? ? ?exit(EXIT_FAILURE);
> > > - ? ?}
> > > -
> > > - ? ?unixctl_command_register("exit", "", test_openflowd_exit, &exiting);
> > > -
> > > - ? ?VLOG_INFO("Open vSwitch version %s", VERSION BUILDNR);
> > > - ? ?VLOG_INFO("OpenFlow protocol version 0x%02x", OFP_VERSION);
> > > -
> > > - ? ?error = ofproto_create(s.dp_name, s.dp_type, &ofproto);
> > > - ? ?if (error) {
> > > - ? ? ? ?VLOG_FATAL("could not initialize OpenFlow switch (%s)",
> > > - ? ? ? ? ? ? ? ? ? strerror(error));
> > > - ? ?}
> > > -
> > > - ? ?/* Add ports to the datapath if requested by the user. */
> > > - ? ?SSET_FOR_EACH (port, &s.ports) {
> > > - ? ? ? ?struct netdev *netdev;
> > > - ? ? ? ?char *name, *type;
> > > -
> > > - ? ? ? ?netdev_parse_name(port, &name, &type);
> > > - ? ? ? ?error = netdev_open(name, type, &netdev);
> > > - ? ? ? ?if (error) {
> > > - ? ? ? ? ? ?VLOG_FATAL("%s: failed to open network device (%s)",
> > > - ? ? ? ? ? ? ? ? ? ? ? port, strerror(error));
> > > - ? ? ? ?}
> > > - ? ? ? ?free(name);
> > > - ? ? ? ?free(type);
> > > -
> > > - ? ? ? ?error = ofproto_port_add(ofproto, netdev, NULL);
> > > - ? ? ? ?if (error) {
> > > - ? ? ? ? ? ?VLOG_FATAL("failed to add %s as a port (%s)",
> > > - ? ? ? ? ? ? ? ? ? ? ? port, strerror(error));
> > > - ? ? ? ?}
> > > -
> > > - ? ? ? ?netdev_close(netdev);
> > > - ? ?}
> > > -
> > > - ? ?/* Configure OpenFlow switch. */
> > > - ? ?if (s.datapath_id) {
> > > - ? ? ? ?ofproto_set_datapath_id(ofproto, s.datapath_id);
> > > - ? ?}
> > > - ? ?ofproto_set_desc(ofproto, s.mfr_desc, s.hw_desc, s.sw_desc,
> > > - ? ? ? ? ? ? ? ? ? ? s.serial_desc, s.dp_desc);
> > > - ? ?error = ofproto_set_snoops(ofproto, &s.snoops);
> > > - ? ?if (error) {
> > > - ? ? ? ?VLOG_FATAL("failed to configure controller snooping connections
> > (%s)",
> > > - ? ? ? ? ? ? ? ? ? strerror(error));
> > > - ? ?}
> > > - ? ?memset(&nf_options, 0, sizeof nf_options);
> > > - ? ?nf_options.collectors = s.netflow;
> > > - ? ?error = ofproto_set_netflow(ofproto, &nf_options);
> > > - ? ?if (error) {
> > > - ? ? ? ?VLOG_FATAL("failed to configure NetFlow collectors (%s)",
> > > - ? ? ? ? ? ? ? ? ? strerror(error));
> > > - ? ?}
> > > - ? ?ofproto_set_controllers(ofproto, s.controllers, s.n_controllers);
> > > - ? ?ofproto_set_fail_mode(ofproto, s.fail_mode);
> > > -
> > > - ? ?daemonize_complete();
> > > -
> > > - ? ?exiting = false;
> > > - ? ?while (!exiting && (s.run_forever || ofproto_is_alive(ofproto))) {
> > > - ? ? ? ?error = ofproto_run(ofproto);
> > > - ? ? ? ?if (error) {
> > > - ? ? ? ? ? ?VLOG_FATAL("unrecoverable datapath error (%s)",
> > strerror(error));
> > > - ? ? ? ?}
> > > - ? ? ? ?unixctl_server_run(unixctl);
> > > - ? ? ? ?netdev_run();
> > > -
> > > - ? ? ? ?ofproto_wait(ofproto);
> > > - ? ? ? ?unixctl_server_wait(unixctl);
> > > - ? ? ? ?netdev_wait();
> > > - ? ? ? ?if (exiting) {
> > > - ? ? ? ? ? ?poll_immediate_wake();
> > > - ? ? ? ?}
> > > - ? ? ? ?poll_block();
> > > - ? ?}
> > > -
> > > - ? ?ofproto_destroy(ofproto);
> > > -
> > > - ? ?return 0;
> > > -}
> > > -
> > > -static void
> > > -test_openflowd_exit(struct unixctl_conn *conn, const char *args
> > OVS_UNUSED,
> > > - ? ? ? ? ? ? ? ? ? void *exiting_)
> > > -{
> > > - ? ?bool *exiting = exiting_;
> > > - ? ?*exiting = true;
> > > - ? ?unixctl_command_reply(conn, 200, NULL);
> > > -}
> > > -
> > > -/* User interface. */
> > > -
> > > -/* Breaks 'ports' apart at commas and adds each resulting word to
> > 'ports'. */
> > > -static void
> > > -parse_ports(const char *s_, struct sset *ports)
> > > -{
> > > - ? ?char *s = xstrdup(s_);
> > > - ? ?char *save_ptr = NULL;
> > > - ? ?char *token;
> > > -
> > > - ? ?for (token = strtok_r(s, ",", &save_ptr); token != NULL;
> > > - ? ? ? ? token = strtok_r(NULL, ",", &save_ptr)) {
> > > - ? ? ? ?sset_add(ports, token);
> > > - ? ?}
> > > - ? ?free(s);
> > > -}
> > > -
> > > -static void
> > > -parse_options(int argc, char *argv[], struct ofsettings *s)
> > > -{
> > > - ? ?enum {
> > > - ? ? ? ?OPT_DATAPATH_ID = UCHAR_MAX + 1,
> > > - ? ? ? ?OPT_MFR_DESC,
> > > - ? ? ? ?OPT_HW_DESC,
> > > - ? ? ? ?OPT_SW_DESC,
> > > - ? ? ? ?OPT_SERIAL_DESC,
> > > - ? ? ? ?OPT_DP_DESC,
> > > - ? ? ? ?OPT_BR_NAME,
> > > - ? ? ? ?OPT_FAIL_MODE,
> > > - ? ? ? ?OPT_INACTIVITY_PROBE,
> > > - ? ? ? ?OPT_MAX_IDLE,
> > > - ? ? ? ?OPT_MAX_BACKOFF,
> > > - ? ? ? ?OPT_SNOOP,
> > > - ? ? ? ?OPT_RATE_LIMIT,
> > > - ? ? ? ?OPT_BURST_LIMIT,
> > > - ? ? ? ?OPT_BOOTSTRAP_CA_CERT,
> > > - ? ? ? ?OPT_OUT_OF_BAND,
> > > - ? ? ? ?OPT_IN_BAND,
> > > - ? ? ? ?OPT_NETFLOW,
> > > - ? ? ? ?OPT_PORTS,
> > > - ? ? ? ?OPT_UNIXCTL,
> > > - ? ? ? ?OPT_ENABLE_DUMMY,
> > > - ? ? ? ?VLOG_OPTION_ENUMS,
> > > - ? ? ? ?LEAK_CHECKER_OPTION_ENUMS,
> > > - ? ? ? ?DAEMON_OPTION_ENUMS
> > > - ? ?};
> > > - ? ?static struct option long_options[] = {
> > > - ? ? ? ?{"datapath-id", required_argument, NULL, OPT_DATAPATH_ID},
> > > - ? ? ? ?{"mfr-desc", required_argument, NULL, OPT_MFR_DESC},
> > > - ? ? ? ?{"hw-desc", required_argument, NULL, OPT_HW_DESC},
> > > - ? ? ? ?{"sw-desc", required_argument, NULL, OPT_SW_DESC},
> > > - ? ? ? ?{"serial-desc", required_argument, NULL, OPT_SERIAL_DESC},
> > > - ? ? ? ?{"dp-desc", required_argument, NULL, OPT_DP_DESC},
> > > - ? ? ? ?{"config", ? ? ?required_argument, NULL, 'F'},
> > > - ? ? ? ?{"br-name", ? ? required_argument, NULL, OPT_BR_NAME},
> > > - ? ? ? ?{"fail", ? ? ? ?required_argument, NULL, OPT_FAIL_MODE},
> > > - ? ? ? ?{"inactivity-probe", required_argument, NULL,
> > OPT_INACTIVITY_PROBE},
> > > - ? ? ? ?{"max-idle", ? ?required_argument, NULL, OPT_MAX_IDLE},
> > > - ? ? ? ?{"max-backoff", required_argument, NULL, OPT_MAX_BACKOFF},
> > > - ? ? ? ?{"listen", ? ? ?required_argument, NULL, 'l'},
> > > - ? ? ? ?{"snoop", ? ? ?required_argument, NULL, OPT_SNOOP},
> > > - ? ? ? ?{"rate-limit", ?optional_argument, NULL, OPT_RATE_LIMIT},
> > > - ? ? ? ?{"burst-limit", required_argument, NULL, OPT_BURST_LIMIT},
> > > - ? ? ? ?{"out-of-band", no_argument, NULL, OPT_OUT_OF_BAND},
> > > - ? ? ? ?{"in-band", ? ? no_argument, NULL, OPT_IN_BAND},
> > > - ? ? ? ?{"netflow", ? ? required_argument, NULL, OPT_NETFLOW},
> > > - ? ? ? ?{"ports", ? ? ? required_argument, NULL, OPT_PORTS},
> > > - ? ? ? ?{"unixctl", ? ? required_argument, NULL, OPT_UNIXCTL},
> > > - ? ? ? ?{"enable-dummy", no_argument, NULL, OPT_ENABLE_DUMMY},
> > > - ? ? ? ?{"verbose", ? ? optional_argument, NULL, 'v'},
> > > - ? ? ? ?{"help", ? ? ? ?no_argument, NULL, 'h'},
> > > - ? ? ? ?{"version", ? ? no_argument, NULL, 'V'},
> > > - ? ? ? ?DAEMON_LONG_OPTIONS,
> > > - ? ? ? ?VLOG_LONG_OPTIONS,
> > > - ? ? ? ?LEAK_CHECKER_LONG_OPTIONS,
> > > - ? ? ? ?STREAM_SSL_LONG_OPTIONS,
> > > - ? ? ? ?{"bootstrap-ca-cert", required_argument, NULL,
> > OPT_BOOTSTRAP_CA_CERT},
> > > - ? ? ? ?{NULL, 0, NULL, 0},
> > > - ? ?};
> > > - ? ?char *short_options = long_options_to_short_options(long_options);
> > > - ? ?struct ofproto_controller controller_opts;
> > > - ? ?struct sset controllers;
> > > - ? ?const char *name;
> > > - ? ?int i;
> > > -
> > > - ? ?/* Set defaults that we can figure out before parsing options. */
> > > - ? ?controller_opts.target = NULL;
> > > - ? ?controller_opts.max_backoff = 8;
> > > - ? ?controller_opts.probe_interval = 5;
> > > - ? ?controller_opts.band = OFPROTO_IN_BAND;
> > > - ? ?controller_opts.rate_limit = 0;
> > > - ? ?controller_opts.burst_limit = 0;
> > > - ? ?s->unixctl_path = NULL;
> > > - ? ?s->fail_mode = OFPROTO_FAIL_STANDALONE;
> > > - ? ?s->datapath_id = 0;
> > > - ? ?s->mfr_desc = NULL;
> > > - ? ?s->hw_desc = NULL;
> > > - ? ?s->sw_desc = NULL;
> > > - ? ?s->serial_desc = NULL;
> > > - ? ?s->dp_desc = NULL;
> > > - ? ?sset_init(&controllers);
> > > - ? ?sset_init(&s->snoops);
> > > - ? ?s->max_idle = 0;
> > > - ? ?sset_init(&s->netflow);
> > > - ? ?sset_init(&s->ports);
> > > - ? ?for (;;) {
> > > - ? ? ? ?int c;
> > > -
> > > - ? ? ? ?c = getopt_long(argc, argv, short_options, long_options, NULL);
> > > - ? ? ? ?if (c == -1) {
> > > - ? ? ? ? ? ?break;
> > > - ? ? ? ?}
> > > -
> > > - ? ? ? ?switch (c) {
> > > - ? ? ? ?case OPT_DATAPATH_ID:
> > > - ? ? ? ? ? ?if (!dpid_from_string(optarg, &s->datapath_id)) {
> > > - ? ? ? ? ? ? ? ?VLOG_FATAL("argument to --datapath-id must be exactly 16
> > hex "
> > > - ? ? ? ? ? ? ? ? ? ? ? ? ? "digits and may not be all-zero");
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_MFR_DESC:
> > > - ? ? ? ? ? ?s->mfr_desc = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_HW_DESC:
> > > - ? ? ? ? ? ?s->hw_desc = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_SW_DESC:
> > > - ? ? ? ? ? ?s->sw_desc = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_SERIAL_DESC:
> > > - ? ? ? ? ? ?s->serial_desc = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_DP_DESC:
> > > - ? ? ? ? ? ?s->dp_desc = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_FAIL_MODE:
> > > - ? ? ? ? ? ?if (!strcmp(optarg, "open") || !strcmp(optarg,
> > "standalone")) {
> > > - ? ? ? ? ? ? ? ?s->fail_mode = OFPROTO_FAIL_STANDALONE;
> > > - ? ? ? ? ? ?} else if (!strcmp(optarg, "closed")
> > > - ? ? ? ? ? ? ? ? ? ? ? || !strcmp(optarg, "secure")) {
> > > - ? ? ? ? ? ? ? ?s->fail_mode = OFPROTO_FAIL_SECURE;
> > > - ? ? ? ? ? ?} else {
> > > - ? ? ? ? ? ? ? ?VLOG_FATAL("--fail argument must be \"standalone\" "
> > > - ? ? ? ? ? ? ? ? ? ? ? ? ? "or \"secure\"");
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_INACTIVITY_PROBE:
> > > - ? ? ? ? ? ?controller_opts.probe_interval = atoi(optarg);
> > > - ? ? ? ? ? ?if (controller_opts.probe_interval < 5) {
> > > - ? ? ? ? ? ? ? ?VLOG_FATAL("--inactivity-probe argument must be at least
> > 5");
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_MAX_IDLE:
> > > - ? ? ? ? ? ?if (!strcmp(optarg, "permanent")) {
> > > - ? ? ? ? ? ? ? ?s->max_idle = OFP_FLOW_PERMANENT;
> > > - ? ? ? ? ? ?} else {
> > > - ? ? ? ? ? ? ? ?s->max_idle = atoi(optarg);
> > > - ? ? ? ? ? ? ? ?if (s->max_idle < 1 || s->max_idle > 65535) {
> > > - ? ? ? ? ? ? ? ? ? ?VLOG_FATAL("--max-idle argument must be between 1
> > and "
> > > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "65535 or the word 'permanent'");
> > > - ? ? ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_MAX_BACKOFF:
> > > - ? ? ? ? ? ?controller_opts.max_backoff = atoi(optarg);
> > > - ? ? ? ? ? ?if (controller_opts.max_backoff < 1) {
> > > - ? ? ? ? ? ? ? ?VLOG_FATAL("--max-backoff argument must be at least 1");
> > > - ? ? ? ? ? ?} else if (controller_opts.max_backoff > 3600) {
> > > - ? ? ? ? ? ? ? ?controller_opts.max_backoff = 3600;
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_RATE_LIMIT:
> > > - ? ? ? ? ? ?if (optarg) {
> > > - ? ? ? ? ? ? ? ?controller_opts.rate_limit = atoi(optarg);
> > > - ? ? ? ? ? ? ? ?if (controller_opts.rate_limit < 1) {
> > > - ? ? ? ? ? ? ? ? ? ?VLOG_FATAL("--rate-limit argument must be at least
> > 1");
> > > - ? ? ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?} else {
> > > - ? ? ? ? ? ? ? ?controller_opts.rate_limit = 1000;
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_BURST_LIMIT:
> > > - ? ? ? ? ? ?controller_opts.burst_limit = atoi(optarg);
> > > - ? ? ? ? ? ?if (controller_opts.burst_limit < 1) {
> > > - ? ? ? ? ? ? ? ?VLOG_FATAL("--burst-limit argument must be at least 1");
> > > - ? ? ? ? ? ?}
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_OUT_OF_BAND:
> > > - ? ? ? ? ? ?controller_opts.band = OFPROTO_OUT_OF_BAND;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_IN_BAND:
> > > - ? ? ? ? ? ?controller_opts.band = OFPROTO_IN_BAND;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_NETFLOW:
> > > - ? ? ? ? ? ?sset_add(&s->netflow, optarg);
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case 'l':
> > > - ? ? ? ? ? ?sset_add(&controllers, optarg);
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_SNOOP:
> > > - ? ? ? ? ? ?sset_add(&s->snoops, optarg);
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_PORTS:
> > > - ? ? ? ? ? ?parse_ports(optarg, &s->ports);
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_UNIXCTL:
> > > - ? ? ? ? ? ?s->unixctl_path = optarg;
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case OPT_ENABLE_DUMMY:
> > > - ? ? ? ? ? ?dummy_enable();
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case 'h':
> > > - ? ? ? ? ? ?usage();
> > > -
> > > - ? ? ? ?case 'V':
> > > - ? ? ? ? ? ?ovs_print_version(OFP_VERSION, OFP_VERSION);
> > > - ? ? ? ? ? ?exit(EXIT_SUCCESS);
> > > -
> > > - ? ? ? ?DAEMON_OPTION_HANDLERS
> > > -
> > > - ? ? ? ?VLOG_OPTION_HANDLERS
> > > -
> > > - ? ? ? ?LEAK_CHECKER_OPTION_HANDLERS
> > > -
> > > - ? ? ? ?STREAM_SSL_OPTION_HANDLERS
> > > -
> > > - ? ? ? ?case OPT_BOOTSTRAP_CA_CERT:
> > > - ? ? ? ? ? ?stream_ssl_set_ca_cert_file(optarg, true);
> > > - ? ? ? ? ? ?break;
> > > -
> > > - ? ? ? ?case '?':
> > > - ? ? ? ? ? ?exit(EXIT_FAILURE);
> > > -
> > > - ? ? ? ?default:
> > > - ? ? ? ? ? ?abort();
> > > - ? ? ? ?}
> > > - ? ?}
> > > - ? ?free(short_options);
> > > -
> > > - ? ?argc -= optind;
> > > - ? ?argv += optind;
> > > - ? ?if (argc < 2) {
> > > - ? ? ? ?VLOG_FATAL("need at least two non-option arguments; "
> > > - ? ? ? ? ? ? ? ? ? "use --help for usage");
> > > - ? ?}
> > > -
> > > - ? ?/* Rate limiting. */
> > > - ? ?if (controller_opts.rate_limit && controller_opts.rate_limit < 100)
> > {
> > > - ? ? ? ?VLOG_WARN("Rate limit set to unusually low value %d",
> > > - ? ? ? ? ? ? ? ? ?controller_opts.rate_limit);
> > > - ? ?}
> > > -
> > > - ? ?/* Local vconns. */
> > > - ? ?ofproto_parse_name(argv[0], &s->dp_name, &s->dp_type);
> > > -
> > > - ? ?/* Figure out controller names. */
> > > - ? ?s->run_forever = false;
> > > - ? ?if (sset_is_empty(&controllers)) {
> > > - ? ? ? ?sset_add_and_free(&controllers, xasprintf("punix:%s/%s.mgmt",
> > > - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?ovs_rundir(),
> > s->dp_name));
> > > - ? ?}
> > > - ? ?for (i = 1; i < argc; i++) {
> > > - ? ? ? ?if (!strcmp(argv[i], "none")) {
> > > - ? ? ? ? ? ?s->run_forever = true;
> > > - ? ? ? ?} else {
> > > - ? ? ? ? ? ?sset_add(&controllers, argv[i]);
> > > - ? ? ? ?}
> > > - ? ?}
> > > -
> > > - ? ?/* Set up controllers. */
> > > - ? ?s->n_controllers = sset_count(&controllers);
> > > - ? ?s->controllers = xmalloc(s->n_controllers * sizeof *s->controllers);
> > > - ? ?i = 0;
> > > - ? ?SSET_FOR_EACH (name, &controllers) {
> > > - ? ? ? ?s->controllers[i] = controller_opts;
> > > - ? ? ? ?s->controllers[i].target = xstrdup(name);
> > > - ? ? ? ?i++;
> > > - ? ?}
> > > - ? ?sset_destroy(&controllers);
> > > -}
> > > -
> > > -static void
> > > -usage(void)
> > > -{
> > > - ? ?printf("%s: an OpenFlow switch implementation.\n"
> > > - ? ? ? ? ? "usage: %s [OPTIONS] [TYPE@]DATAPATH CONTROLLER...\n"
> > > - ? ? ? ? ? "where DATAPATH is a local datapath (e.g. \"dp0\")\n"
> > > - ? ? ? ? ? "optionally with an explicit TYPE (default: \"system\").\n"
> > > - ? ? ? ? ? "Each CONTROLLER is an active OpenFlow connection method.\n",
> > > - ? ? ? ? ? program_name, program_name);
> > > - ? ?vconn_usage(true, true, true);
> > > - ? ?printf("\nOpenFlow options:\n"
> > > - ? ? ? ? ? " ?-d, --datapath-id=ID ? ?Use ID as the OpenFlow switch
> > ID\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ?(ID must consist of 16 hex
> > digits)\n"
> > > - ? ? ? ? ? " ?--mfr-desc=MFR ? ? ? ? ?Identify manufacturer as MFR\n"
> > > - ? ? ? ? ? " ?--hw-desc=HW ? ? ? ? ? ?Identify hardware as HW\n"
> > > - ? ? ? ? ? " ?--sw-desc=SW ? ? ? ? ? ?Identify software as SW\n"
> > > - ? ? ? ? ? " ?--serial-desc=SERIAL ? ?Identify serial number as
> > SERIAL\n"
> > > - ? ? ? ? ? " ?--dp-desc=DP_DESC ? ? ? Identify dp description as
> > DP_DESC\n"
> > > - ? ? ? ? ? "\nNetworking options:\n"
> > > - ? ? ? ? ? " ?--fail=open|closed ? ? ?when controller connection
> > fails:\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ? ?closed: drop all packets\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ? ?open (default): act as learning
> > switch\n"
> > > - ? ? ? ? ? " ?--inactivity-probe=SECS time between inactivity probes\n"
> > > - ? ? ? ? ? " ?--max-idle=SECS ? ? ? ? max idle for flows set up by
> > switch\n"
> > > - ? ? ? ? ? " ?--max-backoff=SECS ? ? ?max time between controller
> > connection\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ?attempts (default: 8 seconds)\n"
> > > - ? ? ? ? ? " ?-l, --listen=METHOD ? ? allow management connections on
> > METHOD\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ?(a passive OpenFlow connection
> > method)\n"
> > > - ? ? ? ? ? " ?--snoop=METHOD ? ? ? ? ?allow controller snooping on
> > METHOD\n"
> > > - ? ? ? ? ? " ? ? ? ? ? ? ? ? ? ? ? ? ?(a passive OpenFlow connection
> > method)\n"
> > > - ? ? ? ? ? " ?--out-of-band ? ? ? ? ? controller connection is
> > out-of-band\n"
> > > - ? ? ? ? ? " ?--netflow=HOST:PORT ? ? configure NetFlow output target\n"
> > > - ? ? ? ? ? "\nRate-limiting of \"packet-in\" messages to the
> > controller:\n"
> > > - ? ? ? ? ? " ?--rate-limit[=PACKETS] ?max rate, in packets/s (default:
> > 1000)\n"
> > > - ? ? ? ? ? " ?--burst-limit=BURST ? ? limit on packet credit for idle
> > time\n");
> > > - ? ?daemon_usage();
> > > - ? ?vlog_usage();
> > > - ? ?printf("\nOther options:\n"
> > > - ? ? ? ? ? " ?--unixctl=SOCKET ? ? ? ?override default control socket
> > name\n"
> > > - ? ? ? ? ? " ?-h, --help ? ? ? ? ? ? ?display this help message\n"
> > > - ? ? ? ? ? " ?-V, --version ? ? ? ? ? display version information\n");
> > > - ? ?leak_checker_usage();
> > > - ? ?exit(EXIT_SUCCESS);
> > > -}
> > > --
> > > 1.7.4.4
> > >
> > > _______________________________________________
> > > dev mailing list
> > > dev at openvswitch.org
> > > http://openvswitch.org/mailman/listinfo/dev
> > >
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > dev mailing list
> > dev at openvswitch.org
> > http://openvswitch.org/mailman/listinfo/dev
> >
> >
> > End of dev Digest, Vol 27, Issue 86
> > ***********************************
> >
> 
> 
> 
> -- 
> Best,
> Hassan
> ----------------------------------------------------
> ----------------------------------------------------
> ----------------------------------------------------
> --------------------------
> This electronic message transmission contains information from the Company
> that may be proprietary, confidential and/or privileged.  The information is
> intended only for the use of the individuals or entity named above.  If you
> are not the intended recipient, be aware that any disclosure, copying or
> distribution or use of the contents of this information is prohibited.  If
> you have received this electronic transmission in error, please notify the
> sender immediately by replying to the address listed in the ?From:? field.

> _______________________________________________
> dev mailing list
> dev at openvswitch.org
> http://openvswitch.org/mailman/listinfo/dev