[ovs-dev] [PATCH v6 0/4] Add packet recirculation

Simon Horman horms at verge.net.au
Tue Apr 16 08:14:06 UTC 2013


Recirculation is a technique to allow a frame to re-enter
frame processing. This is intended to be used after actions
have been applied to the frame with modify the frame in
some way that makes it possible for richer processing to occur.

An example is and indeed targeted use case is MPLS. If an MPLS frame has an
mpls_pop action applied with the IPv4 ethernet type then it becomes
possible to decode the IPv4 portion of the frame. This may be used to
construct a facet that modifies the IPv4 portion of the frame. This is not
possible prior to the mpls_pop action as the contents of the frame after
the MPLS stack is not known to be IPv4.


Status:

I have dropped the RFC prefix from this series as I now believe
it is feature-complete. Any and all review is greatly appreciated.

Design:

* New recirculation action.

  ovs-vswitchd adds a recirculation action to the end of a list of
  datapath actions for a flow when the actions are truncated because
  insufficient flow match information is available to add the next
  OpenFlow action.  The recirculation action is preceded by an action
  to set the skb_mark to an id which can be used to scope a facet lookup
  of a recirculated packet.

  e.g.  pop_mpls(0x0800),dec_ttl becomes pop_mpls(0x800),set(skb_mark(id)),recirculate

* Datapath behaviour

  Then the datapath encounters a recirculate action it:
  + Recalculates the flow key based on the packet
    which will typically have been modified by previous actions
  + As the recirculate action is preceded by a set(skb_mark(id)) action,
    the new match key will now include skb_mark=id.
  + Performs a lookup using the new match key
  + Processes the packet if a facet matches the key or;
  + Makes an upcall if necessary

* No facet behaviour

  + Loop:
    1) translate actions
    2) If there is a recirculate action, execute packet
       and go back to 1) for remaining actions.


Base/Pre-requisites:

This patch depends on "[PATCH v2.24] datapath: Add basic MPLS support to kernel".
There are currently no other patches in the recirculation series.


Availability:

For reference this patch is available in git at:
git://github.com/horms/openvswitch.git devel/mpls-recirculate.v6


Change Log:

v6
* Rearange patches so as only to add self-contained working chages
* Create execute_actions() in lib/execute-actions.c
  - This moves makes much more action execution code than before
    from the user-spcace datapath into common library code.
* Add set skb_priority support to execute_set_action()
* Add set tunnel support to execute_set_action()
* Support revalidation of facets for recirculated packets
* Address other elements Jesse's review, as noted in
  per-patch changelogs


v5
* Correct declaration of facet_find_by_id to match definition:
  ovs_be32 -> uint32_t.
* Enhancements to recirculation id code:
  - Allow efficient lookup of facets by their recirculation id
  - Add RECIRCULATION_ID_DUMMY which may be used in cases
    where no facet it used. It is an arbitrary valid id.
  - Also add recirculated element to action_xlate_ctx()
    to use to detect if a recirculation action was added during
    translation. The previous scheme of checking if recirculation_id
    was not RECIRCULATION_ID_NONE is broken for cases where
    the context is initialised with a recirculation_id other than
    RECIRCULATION_ID_NONE. E.g. when RECIRCULATION_ID_DUMMY is used.
  - Avoid id collision

rfc4:
* Allow recirculation without facets in ovs-vswitchd
  - Handle flow miss without facet
  - Packet out
* Minor enhancement to recirculation id management: Add RECIRCULATE_ID_NONE
  to use instead of using 0 directly.
* Correct calculation of facet->recirculation_ofpacts and
  facet->recirculation_ofpacts_len in subfacet_make_actions()
  in the case of more than one level of recirculation.

rfc3
* Use IS_ERR_OR_NULL()
* Handle facet consistency checking by constructing a chain of facets
  from the given facet, to its recirculation parent and then its parent
  until the topmost facet.  If there is no recirculation  the chain will
  be of length one. If there is one recirculation action then the chain
  will be of length two. And so on.

  The topmost facet in the chain can is used to lookup the rule to be
  verified. The chain is then walked from top to bottom, translating
  actions up to the end or the first recirculation action that is
  encountered, whichever comes first. As the code walks down the chain
  it updates the actions that are executed to start of the actions to
  be executed to be just after the end of the actions executed in the
  previous facet in the chain. This is similar to the way that facets
  are created when a recirculation action is encountered.

rfc2
* As suggested by Jesse Gross
  - Update for changes to ovs_dp_process_received_packet()
    to no longer check if OVS_CB(skb)->flow is pre-initialised.
  - Do not add spurious printk debugging to ovs_execute_actions()
  - Do not add spurious debugging messages to commit_set_nw_action()
  - Correct typo in comment above commit_odp_actions().
  - Do not execute recirculation in ovs-vswitchd, rather allow
    the datapath to make an upcall when a recirculation action
    is encountered on execute.
    + This implicitly breaks support for recirculation without facets,
      so for now force all misses of MPLS frames to be handled with
      a facet; and treat handling of recirculation for packet_out as
      a todo item.
  - Use skb_mark for recirculation_id in match. This avoids
    both expanding the match and including a recirculation_id parameter
    with the recirculation action: set_skb_mark should be used before
    the recirculation action.
  - Tidy up ownership of skb in ovs_execute_actions

rfc1
* Initial post


Patch List and Diffstat:

Simon Horman (5):
  Add execute_actions
  Add set skb_mark support to execute_set_action
  Add set skb_priority support to execute_set_action
  Add set tunnel support to execute_set_action
  Add packet recirculation

 datapath/actions.c          |    9 +-
 datapath/datapath.c         |  105 ++++---
 datapath/datapath.h         |    2 +-
 include/linux/openvswitch.h |    4 +
 lib/automake.mk             |    2 +
 lib/dpif-netdev.c           |  249 +++++-----------
 lib/execute-actions.c       |  225 +++++++++++++++
 lib/execute-actions.h       |   34 +++
 lib/flow.h                  |    4 +
 lib/odp-util.c              |   17 +-
 lib/odp-util.h              |    4 +
 ofproto/ofproto-dpif.c      |  675 ++++++++++++++++++++++++++++++++++++++-----
 12 files changed, 1032 insertions(+), 298 deletions(-)
 create mode 100644 lib/execute-actions.c
 create mode 100644 lib/execute-actions.h

-- 
1.7.10.4




More information about the dev mailing list