[ovs-dev] [PATCH 2/3] tests: Add tests for socket connections over IPv6.
Arun Sharma
arun.sharma at calsoftinc.com
Mon Dec 9 12:21:22 UTC 2013
Also added tests for NetFlow and sFlow using IPv6 sockets.
Signed-off-by: Nandan Nivgune <nandan.nivgune at calsoftinc.com>
Signed-off-by: Abhijit Bhopatkar <abhijit.bhopatkar at calsoftinc.com>
Signed-off-by: Arun Sharma <arun.sharma at calsoftinc.com>
---
tests/ofproto-dpif.at | 872 ++++++++++++++++++++++++-----------------------
tests/ofproto-macros.at | 17 +
tests/ovs-vsctl.at | 28 +-
tests/ovsdb-idl.at | 24 +-
tests/ovsdb-server.at | 225 ++++++++----
5 files changed, 683 insertions(+), 483 deletions(-)
diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
index 4d8d460..a6b7abd 100644
--- a/tests/ofproto-dpif.at
+++ b/tests/ofproto-dpif.at
@@ -1781,424 +1781,451 @@ AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]\{1,\}$/?/' | sort],
OVS_VSWITCHD_STOP
AT_CLEANUP
-dnl Test that sFlow samples packets correctly.
-AT_SETUP([ofproto-dpif - sFlow packet sampling])
-OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
-
-ON_EXIT([kill `cat test-sflow.pid`])
-AT_CHECK([test-sflow --log-file --detach --no-chdir --pidfile 0:127.0.0.1 > sflow.log], [0], [], [ignore])
-AT_CAPTURE_FILE([sflow.log])
-SFLOW_PORT=`parse_listening_port < test-sflow.log`
-
-ovs-appctl time/stop
-
-ADD_OF_PORTS([br0], 1, 2)
-ovs-vsctl \
- set Interface br0 options:ifindex=1002 -- \
- set Interface p1 options:ifindex=1004 -- \
- set Interface p2 options:ifindex=1003 -- \
- set Bridge br0 sflow=@sf -- \
- --id=@sf create sflow targets=\"127.0.0.1:$SFLOW_PORT\" \
- header=128 sampling=1 polling=1
-
-dnl open with ARP packets to seed the bridge-learning. The output
-dnl ifIndex numbers should be reported predictably after that.
-dnl Since we set sampling=1 we should see all of these packets
-dnl reported. Sorting the output by data-source and seqNo makes
-dnl it deterministic. Ensuring that we send at least two packets
-dnl into each port means we get to check the seq nos are
-dnl incrementing correctly.
-
-ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=FF:FF:FF:FF:FF:FF),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
-ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=FF:FF:FF:FF:FF:FF),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:07,tha=00:00:00:00:00:00)'
-ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'
-ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)'
-ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x86dd),ipv6(src=fe80::1,dst=fe80::2,label=0,proto=10,tclass=0x70,hlimit=128,frag=no)'
-
-dnl sleep long enough to get more than one counter sample
-dnl from each datasource so we can check sequence numbers
-for i in `seq 1 30`; do
- ovs-appctl time/warp 100
-done
-OVS_VSWITCHD_STOP
-ovs-appctl -t test-sflow exit
+# CHECK_SFLOW_SAMPLING_PACKET(LOOPBACK_ADDR, IP_VERSION_TYPE)
+#
+# Test that sFlow samples packets correctly using IPv4/IPv6 sFlow collector
+#
+# IP_VERSION_TYPE is used in AT_SETUP
+m4_define([CHECK_SFLOW_SAMPLING_PACKET],
+ [AT_SETUP([ofproto-dpif - sFlow packet sampling - $2 collector])
+ OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
+
+ ON_EXIT([kill `cat test-sflow.pid`])
+ AT_CHECK([test-sflow --log-file --detach --no-chdir --pidfile 0:$1 > sflow.log], [0], [], [ignore])
+ AT_CAPTURE_FILE([sflow.log])
+ m4_if([$1], [127.0.0.1],
+ [SFLOW_PORT=`parse_listening_port < test-sflow.log`
+ DS_IN_SFLOW_OUTPUT=$1],
+ [SFLOW_PORT=`parse_ipv6_listening_port < test-sflow.log`
+ DS_IN_SFLOW_OUTPUT=0:0:0:0:0:0:0:1])
+
+ ovs-appctl time/stop
+
+ ADD_OF_PORTS([br0], 1, 2)
+ ovs-vsctl \
+ set Interface br0 options:ifindex=1002 -- \
+ set Interface p1 options:ifindex=1004 -- \
+ set Interface p2 options:ifindex=1003 -- \
+ set Bridge br0 sflow=@sf -- \
+ --id=@sf create sflow targets=\"$1:$SFLOW_PORT\" \
+ header=128 sampling=1 polling=1
+
+ dnl open with ARP packets to seed the bridge-learning. The output
+ dnl ifIndex numbers should be reported predictably after that.
+ dnl Since we set sampling=1 we should see all of these packets
+ dnl reported. Sorting the output by data-source and seqNo makes
+ dnl it deterministic. Ensuring that we send at least two packets
+ dnl into each port means we get to check the seq nos are
+ dnl incrementing correctly.
+
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=FF:FF:FF:FF:FF:FF),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=FF:FF:FF:FF:FF:FF),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:07,tha=00:00:00:00:00:00)'
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x86dd),ipv6(src=fe80::1,dst=fe80::2,label=0,proto=10,tclass=0x70,hlimit=128,frag=no)'
+
+ dnl sleep long enough to get more than one counter sample
+ dnl from each datasource so we can check sequence numbers
+ for i in `seq 1 30`; do
+ ovs-appctl time/warp 100
+ done
+ OVS_VSWITCHD_STOP
+ ovs-appctl -t test-sflow exit
-AT_CHECK([[sort sflow.log | $EGREP 'HEADER|ERROR' | sed 's/ /\
- /g']], [0], [dnl
+ AT_CHECK_UNQUOTED([[sort sflow.log | $EGREP 'HEADER|ERROR' | sed 's/ /\
+ /g']], [0], [dnl
HEADER
- dgramSeqNo=1
- ds=127.0.0.1>2:1000
- fsSeqNo=1
- in_vlan=0
- in_priority=0
- out_vlan=0
- out_priority=0
- meanSkip=1
- samplePool=1
- dropEvents=0
- in_ifindex=1004
- in_format=0
- out_ifindex=2
- out_format=2
- hdr_prot=1
- pkt_len=64
- stripped=4
- hdr_len=60
- hdr=FF-FF-FF-FF-FF-FF-50-54-00-00-00-05-08-06-00-01-08-00-06-04-00-01-50-54-00-00-00-05-C0-A8-00-02-00-00-00-00-00-00-C0-A8-00-01-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
+ dgramSeqNo=1
+ ds=$DS_IN_SFLOW_OUTPUT>2:1000
+ fsSeqNo=1
+ in_vlan=0
+ in_priority=0
+ out_vlan=0
+ out_priority=0
+ meanSkip=1
+ samplePool=1
+ dropEvents=0
+ in_ifindex=1004
+ in_format=0
+ out_ifindex=2
+ out_format=2
+ hdr_prot=1
+ pkt_len=64
+ stripped=4
+ hdr_len=60
+ hdr=FF-FF-FF-FF-FF-FF-50-54-00-00-00-05-08-06-00-01-08-00-06-04-00-01-50-54-00-00-00-05-C0-A8-00-02-00-00-00-00-00-00-C0-A8-00-01-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
HEADER
- dgramSeqNo=1
- ds=127.0.0.1>2:1000
- fsSeqNo=2
- in_vlan=0
- in_priority=0
- out_vlan=0
- out_priority=0
- meanSkip=1
- samplePool=2
- dropEvents=0
- in_ifindex=1003
- in_format=0
- out_ifindex=2
- out_format=2
- hdr_prot=1
- pkt_len=64
- stripped=4
- hdr_len=60
- hdr=FF-FF-FF-FF-FF-FF-50-54-00-00-00-07-08-06-00-01-08-00-06-04-00-01-50-54-00-00-00-07-C0-A8-00-01-00-00-00-00-00-00-C0-A8-00-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
+ dgramSeqNo=1
+ ds=$DS_IN_SFLOW_OUTPUT>2:1000
+ fsSeqNo=2
+ in_vlan=0
+ in_priority=0
+ out_vlan=0
+ out_priority=0
+ meanSkip=1
+ samplePool=2
+ dropEvents=0
+ in_ifindex=1003
+ in_format=0
+ out_ifindex=2
+ out_format=2
+ hdr_prot=1
+ pkt_len=64
+ stripped=4
+ hdr_len=60
+ hdr=FF-FF-FF-FF-FF-FF-50-54-00-00-00-07-08-06-00-01-08-00-06-04-00-01-50-54-00-00-00-07-C0-A8-00-01-00-00-00-00-00-00-C0-A8-00-02-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
HEADER
- dgramSeqNo=1
- ds=127.0.0.1>2:1000
- fsSeqNo=3
- in_vlan=0
- in_priority=0
- out_vlan=0
- out_priority=0
- meanSkip=1
- samplePool=3
- dropEvents=0
- in_ifindex=1004
- in_format=0
- out_ifindex=1003
- out_format=0
- hdr_prot=1
- pkt_len=64
- stripped=4
- hdr_len=60
- hdr=50-54-00-00-00-07-50-54-00-00-00-05-08-00-45-00-00-1C-00-00-00-00-40-01-F9-8D-C0-A8-00-01-C0-A8-00-02-08-00-F7-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
+ dgramSeqNo=1
+ ds=$DS_IN_SFLOW_OUTPUT>2:1000
+ fsSeqNo=3
+ in_vlan=0
+ in_priority=0
+ out_vlan=0
+ out_priority=0
+ meanSkip=1
+ samplePool=3
+ dropEvents=0
+ in_ifindex=1004
+ in_format=0
+ out_ifindex=1003
+ out_format=0
+ hdr_prot=1
+ pkt_len=64
+ stripped=4
+ hdr_len=60
+ hdr=50-54-00-00-00-07-50-54-00-00-00-05-08-00-45-00-00-1C-00-00-00-00-40-01-F9-8D-C0-A8-00-01-C0-A8-00-02-08-00-F7-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
HEADER
- dgramSeqNo=1
- ds=127.0.0.1>2:1000
- fsSeqNo=4
- in_vlan=0
- in_priority=0
- out_vlan=0
- out_priority=0
- meanSkip=1
- samplePool=4
- dropEvents=0
- in_ifindex=1003
- in_format=0
- out_ifindex=1004
- out_format=0
- hdr_prot=1
- pkt_len=64
- stripped=4
- hdr_len=60
- hdr=50-54-00-00-00-05-50-54-00-00-00-07-08-00-45-00-00-1C-00-00-00-00-40-01-F9-8D-C0-A8-00-02-C0-A8-00-01-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
+ dgramSeqNo=1
+ ds=$DS_IN_SFLOW_OUTPUT>2:1000
+ fsSeqNo=4
+ in_vlan=0
+ in_priority=0
+ out_vlan=0
+ out_priority=0
+ meanSkip=1
+ samplePool=4
+ dropEvents=0
+ in_ifindex=1003
+ in_format=0
+ out_ifindex=1004
+ out_format=0
+ hdr_prot=1
+ pkt_len=64
+ stripped=4
+ hdr_len=60
+ hdr=50-54-00-00-00-05-50-54-00-00-00-07-08-00-45-00-00-1C-00-00-00-00-40-01-F9-8D-C0-A8-00-02-C0-A8-00-01-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
HEADER
- dgramSeqNo=1
- ds=127.0.0.1>2:1000
- fsSeqNo=5
- in_vlan=0
- in_priority=0
- out_vlan=0
- out_priority=0
- meanSkip=1
- samplePool=5
- dropEvents=0
- in_ifindex=1003
- in_format=0
- out_ifindex=1004
- out_format=0
- hdr_prot=1
- pkt_len=64
- stripped=4
- hdr_len=60
- hdr=50-54-00-00-00-05-50-54-00-00-00-07-86-DD-67-00-00-00-00-00-0A-80-FE-80-00-00-00-00-00-00-00-00-00-00-00-00-00-01-FE-80-00-00-00-00-00-00-00-00-00-00-00-00-00-02-00-00-00-00-00-00
-])
-
-AT_CHECK([[sort sflow.log | $EGREP 'IFCOUNTERS|ERROR' | head -6 | sed 's/ /\
- /g']], [0], [dnl
+ dgramSeqNo=1
+ ds=$DS_IN_SFLOW_OUTPUT>2:1000
+ fsSeqNo=5
+ in_vlan=0
+ in_priority=0
+ out_vlan=0
+ out_priority=0
+ meanSkip=1
+ samplePool=5
+ dropEvents=0
+ in_ifindex=1003
+ in_format=0
+ out_ifindex=1004
+ out_format=0
+ hdr_prot=1
+ pkt_len=64
+ stripped=4
+ hdr_len=60
+ hdr=50-54-00-00-00-05-50-54-00-00-00-07-86-DD-67-00-00-00-00-00-0A-80-FE-80-00-00-00-00-00-00-00-00-00-00-00-00-00-01-FE-80-00-00-00-00-00-00-00-00-00-00-00-00-00-02-00-00-00-00-00-00
+])
+
+ AT_CHECK_UNQUOTED([[sort sflow.log | $EGREP 'IFCOUNTERS|ERROR' | head -6 | sed 's/ /\
+ /g']], [0], [dnl
IFCOUNTERS
- dgramSeqNo=2
- ds=127.0.0.1>0:1002
- csSeqNo=1
- ifindex=1002
- type=6
- ifspeed=100000000
- direction=0
- status=3
- in_octets=0
- in_unicasts=0
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=120
- out_unicasts=2
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
+ dgramSeqNo=2
+ ds=$DS_IN_SFLOW_OUTPUT>0:1002
+ csSeqNo=1
+ ifindex=1002
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=3
+ in_octets=0
+ in_unicasts=0
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=120
+ out_unicasts=2
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
IFCOUNTERS
- dgramSeqNo=2
- ds=127.0.0.1>0:1003
- csSeqNo=1
- ifindex=1003
- type=6
- ifspeed=100000000
- direction=0
- status=0
- in_octets=138
- in_unicasts=3
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=120
- out_unicasts=2
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
+ dgramSeqNo=2
+ ds=$DS_IN_SFLOW_OUTPUT>0:1003
+ csSeqNo=1
+ ifindex=1003
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=0
+ in_octets=138
+ in_unicasts=3
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=120
+ out_unicasts=2
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
IFCOUNTERS
- dgramSeqNo=2
- ds=127.0.0.1>0:1004
- csSeqNo=1
- ifindex=1004
- type=6
- ifspeed=100000000
- direction=0
- status=0
- in_octets=84
- in_unicasts=2
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=180
- out_unicasts=3
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
+ dgramSeqNo=2
+ ds=$DS_IN_SFLOW_OUTPUT>0:1004
+ csSeqNo=1
+ ifindex=1004
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=0
+ in_octets=84
+ in_unicasts=2
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=180
+ out_unicasts=3
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
IFCOUNTERS
- dgramSeqNo=3
- ds=127.0.0.1>0:1002
- csSeqNo=2
- ifindex=1002
- type=6
- ifspeed=100000000
- direction=0
- status=3
- in_octets=0
- in_unicasts=0
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=120
- out_unicasts=2
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
+ dgramSeqNo=3
+ ds=$DS_IN_SFLOW_OUTPUT>0:1002
+ csSeqNo=2
+ ifindex=1002
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=3
+ in_octets=0
+ in_unicasts=0
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=120
+ out_unicasts=2
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
IFCOUNTERS
- dgramSeqNo=3
- ds=127.0.0.1>0:1003
- csSeqNo=2
- ifindex=1003
- type=6
- ifspeed=100000000
- direction=0
- status=0
- in_octets=138
- in_unicasts=3
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=120
- out_unicasts=2
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
+ dgramSeqNo=3
+ ds=$DS_IN_SFLOW_OUTPUT>0:1003
+ csSeqNo=2
+ ifindex=1003
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=0
+ in_octets=138
+ in_unicasts=3
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=120
+ out_unicasts=2
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
IFCOUNTERS
- dgramSeqNo=3
- ds=127.0.0.1>0:1004
- csSeqNo=2
- ifindex=1004
- type=6
- ifspeed=100000000
- direction=0
- status=0
- in_octets=84
- in_unicasts=2
- in_multicasts=0
- in_broadcasts=4294967295
- in_discards=0
- in_errors=0
- in_unknownprotos=4294967295
- out_octets=180
- out_unicasts=3
- out_multicasts=4294967295
- out_broadcasts=4294967295
- out_discards=0
- out_errors=0
- promiscuous=0
-])
-AT_CLEANUP
-
-
-
-dnl Test that basic NetFlow reports flow statistics correctly:
-dnl - The initial packet of a flow are correctly accounted.
-dnl - Later packets within a flow are correctly accounted.
-dnl - Flow actions changing (in this case, due to MAC learning)
-dnl cause a record to be sent.
-AT_SETUP([ofproto-dpif - NetFlow flow expiration])
-
-OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
-ADD_OF_PORTS([br0], 1, 2)
-
-ovs-appctl time/stop
-ON_EXIT([kill `cat test-netflow.pid`])
-AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:127.0.0.1 > netflow.log], [0], [], [ignore])
-AT_CAPTURE_FILE([netflow.log])
-NETFLOW_PORT=`parse_listening_port < test-netflow.log`
-
-ovs-vsctl \
- set Bridge br0 netflow=@nf -- \
- --id=@nf create NetFlow targets=\"127.0.0.1:$NETFLOW_PORT\" \
- engine_id=1 engine_type=2 active_timeout=30 add-id-to-interface=false
-
-for delay in 1000 30000; do
- ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'
- ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)'
-
- ovs-appctl time/warp $delay
-done
+ dgramSeqNo=3
+ ds=$DS_IN_SFLOW_OUTPUT>0:1004
+ csSeqNo=2
+ ifindex=1004
+ type=6
+ ifspeed=100000000
+ direction=0
+ status=0
+ in_octets=84
+ in_unicasts=2
+ in_multicasts=0
+ in_broadcasts=4294967295
+ in_discards=0
+ in_errors=0
+ in_unknownprotos=4294967295
+ out_octets=180
+ out_unicasts=3
+ out_multicasts=4294967295
+ out_broadcasts=4294967295
+ out_discards=0
+ out_errors=0
+ promiscuous=0
+])
+ AT_CLEANUP])
+
+CHECK_SFLOW_SAMPLING_PACKET([127.0.0.1], [IPv4])
+CHECK_SFLOW_SAMPLING_PACKET([::1], [IPv6])
+
+# CHECK_NETFLOW_EXPIRATION(LOOPBACK_ADDR, IP_VERSION_TYPE)
+#
+# Test that basic NetFlow reports flow statistics correctly:
+# The initial packet of a flow are correctly accounted.
+# Later packets within a flow are correctly accounted.
+# Flow actions changing (in this case, due to MAC learning)
+# cause a record to be sent.
+#
+# IP_VERSION_TYPE is used in AT_SETUP
+m4_define([CHECK_NETFLOW_EXPIRATION],
+ [AT_SETUP([ofproto-dpif - NetFlow flow expiration - $2 collector])
+ OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
+ ADD_OF_PORTS([br0], 1, 2)
+
+ ON_EXIT([kill `cat test-netflow.pid`])
+ AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:$1 > netflow.log], [0], [], [ignore])
+ AT_CAPTURE_FILE([netflow.log])
+ m4_if([$1], [127.0.0.1],
+ [NETFLOW_PORT=`parse_listening_port < test-netflow.log`],
+ [NETFLOW_PORT=`parse_ipv6_listening_port < test-netflow.log`])
+
+ ovs-vsctl \
+ set Bridge br0 netflow=@nf -- \
+ --id=@nf create NetFlow targets=\"$1:$NETFLOW_PORT\" \
+ engine_id=1 engine_type=2 active_timeout=30 add-id-to-interface=false
+
+ for delay in 1000 30000; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)'
+
+ ovs-appctl time/warp $delay
+ done
-sleep 1
-OVS_VSWITCHD_STOP
-ovs-appctl -t test-netflow exit
+ sleep 1
+ OVS_VSWITCHD_STOP
+ ovs-appctl -t test-netflow exit
-AT_CHECK([[sed -e 's/, uptime [0-9]*//
-s/, now [0-9.]*//
-s/time \([0-9]*\)\.\.\.\1$/time <moment>/
-s/time [0-9]*\.\.\.[0-9]*/time <range>/
-' netflow.log | sort]], [0],
- [
+ AT_CHECK([[sed -e 's/, uptime [0-9]*//
+ s/, now [0-9.]*//
+ s/time \([0-9]*\)\.\.\.\1$/time <moment>/
+ s/time [0-9]*\.\.\.[0-9]*/time <range>/
+ ' netflow.log | sort]], [0],
+ [
header: v5, seq 0, engine 2,1
header: v5, seq 1, engine 2,1
seq 0: 192.168.0.1 > 192.168.0.2, if 1 > 65535, 1 pkts, 60 bytes, ICMP 8:0, time <moment>
seq 1: 192.168.0.1 > 192.168.0.2, if 1 > 2, 1 pkts, 60 bytes, ICMP 8:0, time <moment>
seq 1: 192.168.0.2 > 192.168.0.1, if 2 > 1, 2 pkts, 120 bytes, ICMP 0:0, time <range>
])
-AT_CLEANUP
+ AT_CLEANUP])
-dnl Test that basic NetFlow reports active expirations correctly.
-AT_SETUP([ofproto-dpif - NetFlow active expiration])
+CHECK_NETFLOW_EXPIRATION([127.0.0.1], [IPv4])
+CHECK_NETFLOW_EXPIRATION([::1], [IPv6])
-OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
-ADD_OF_PORTS([br0], 1, 2)
-
-ON_EXIT([kill `cat test-netflow.pid`])
-AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:127.0.0.1 > netflow.log], [0], [], [ignore])
-AT_CAPTURE_FILE([netflow.log])
-NETFLOW_PORT=`parse_listening_port < test-netflow.log`
-
-ovs-vsctl \
- set Bridge br0 netflow=@nf -- \
- --id=@nf create NetFlow targets=\"127.0.0.1:$NETFLOW_PORT\" \
- engine_id=1 engine_type=2 active_timeout=10 add-id-to-interface=false
-
-AT_CHECK([ovs-appctl time/stop])
-n=1
-while test $n -le 60; do
- n=`expr $n + 1`
-
- ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=1234,dst=80)'
- ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=80,dst=1234)'
-
- ovs-appctl time/warp 1000
-done
-
-ovs-appctl time/warp 10000
+# CHECK_NETFLOW_ACTIVE_EXPIRATION(LOOPBACK_ADDR, IP_VERSION_TYPE)
+#
+# Test that basic NetFlow reports active expirations correctly.
+#
+# IP_VERSION_TYPE is used in AT_SETUP
+m4_define([CHECK_NETFLOW_ACTIVE_EXPIRATION],
+ [AT_SETUP([ofproto-dpif - NetFlow active expiration - $2 collector])
+
+ OVS_VSWITCHD_START([set Bridge br0 fail-mode=standalone])
+ ADD_OF_PORTS([br0], 1, 2)
+
+ ON_EXIT([kill `cat test-netflow.pid`])
+ AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:$1 > netflow.log], [0], [], [ignore])
+ AT_CAPTURE_FILE([netflow.log])
+ m4_if([$1], [127.0.0.1],
+ [NETFLOW_PORT=`parse_listening_port < test-netflow.log`],
+ [NETFLOW_PORT=`parse_ipv6_listening_port < test-netflow.log`])
+
+ ovs-vsctl \
+ set Bridge br0 netflow=@nf -- \
+ --id=@nf create NetFlow targets=\"$1:$NETFLOW_PORT\" \
+ engine_id=1 engine_type=2 active_timeout=10 add-id-to-interface=false
+
+ AT_CHECK([ovs-appctl time/stop])
+ n=1
+ while test $n -le 60; do
+ n=`expr $n + 1`
+
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=1234,dst=80)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=80,dst=1234)'
+
+ ovs-appctl time/warp 1000
+ done
-sleep 1
-OVS_VSWITCHD_STOP
-ovs-appctl -t test-netflow exit
-
-# Count the number of reported packets:
-# - From source to destination before MAC learning kicks in (just one).
-# - From source to destination after that.
-# - From destination to source.
-n_learn=0
-n_in=0
-n_out=0
-n_other=0
-n_recs=0
-none=0
-while read line; do
- pkts=`echo "$line" | sed 's/.*, \([[0-9]]*\) pkts,.*/\1/'`
- case $pkts in
- [[0-9]]*) ;;
- *) continue ;;
- esac
-
- case $line in
- "seq "*": 192.168.0.1 > 192.168.0.2, if 1 > 65535, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
- counter=n_learn
- ;;
- "seq "*": 192.168.0.1 > 192.168.0.2, if 1 > 2, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
- counter=n_in
- ;;
- "seq "*": 192.168.0.2 > 192.168.0.1, if 2 > 1, "*" pkts, "*" bytes, TCP 80 > 1234, time "*)
- counter=n_out
- ;;
- *)
- counter=n_other
- ;;
- esac
- eval $counter=\`expr \$$counter + \$pkts\`
- n_recs=`expr $n_recs + 1`
-done < netflow.log
-
-# There should be exactly 1 MAC learning packet,
-# exactly 59 other packets in that direction,
-# and exactly 60 packets in the other direction.
-AT_CHECK([echo $n_learn $n_in $n_out $n_other], [0], [1 59 60 0
-])
-
-# There should be 1 expiration for MAC learning,
-# at least 5 active and a final expiration in one direction,
-# and at least 5 active and a final expiration in the other direction.
-echo $n_recs
-AT_CHECK([test $n_recs -ge 13])
-
-AT_CLEANUP
+ ovs-appctl time/warp 10000
+
+ sleep 1
+ OVS_VSWITCHD_STOP
+ ovs-appctl -t test-netflow exit
+
+ # Count the number of reported packets:
+ # - From source to destination before MAC learning kicks in (just one).
+ # - From source to destination after that.
+ # - From destination to source.
+ n_learn=0
+ n_in=0
+ n_out=0
+ n_other=0
+ n_recs=0
+ none=0
+ while read line; do
+ pkts=`echo "$line" | sed 's/.*, \([[0-9]]*\) pkts,.*/\1/'`
+ case $pkts in
+ [[0-9]]*) ;;
+ *) continue ;;
+ esac
+
+ case $line in
+ "seq "*": 192.168.0.1 > 192.168.0.2, if 1 > 65535, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
+ counter=n_learn
+ ;;
+ "seq "*": 192.168.0.1 > 192.168.0.2, if 1 > 2, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
+ counter=n_in
+ ;;
+ "seq "*": 192.168.0.2 > 192.168.0.1, if 2 > 1, "*" pkts, "*" bytes, TCP 80 > 1234, time "*)
+ counter=n_out
+ ;;
+ *)
+ counter=n_other
+ ;;
+ esac
+ eval $counter=\`expr \$$counter + \$pkts\`
+ n_recs=`expr $n_recs + 1`
+ done < netflow.log
+
+ # There should be exactly 1 MAC learning packet,
+ # exactly 59 other packets in that direction,
+ # and exactly 60 packets in the other direction.
+ AT_CHECK([echo $n_learn $n_in $n_out $n_other], [0], [1 59 60 0
+])
+
+ # There should be 1 expiration for MAC learning,
+ # at least 5 active and a final expiration in one direction,
+ # and at least 5 active and a final expiration in the other direction.
+ echo $n_recs
+ AT_CHECK([test $n_recs -ge 13])
+ AT_CLEANUP])
+
+CHECK_NETFLOW_ACTIVE_EXPIRATION([127.0.0.1], [IPv4])
+CHECK_NETFLOW_ACTIVE_EXPIRATION([::1], [IPv6])
AT_SETUP([idle_age and hard_age increase over time])
OVS_VSWITCHD_START
@@ -2631,29 +2658,38 @@ skb_priority(0),in_port(1),eth(src=50:54:00:00:00:0b/ff:ff:ff:ff:ff:ff,dst=50:54
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto-dpif megaflow - netflow])
-OVS_VSWITCHD_START
-ADD_OF_PORTS([br0], [1], [2])
-
-dnl NetFlow configuration disables wildcarding relevant fields
-ON_EXIT([kill `cat test-netflow.pid`])
-AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:127.0.0.1 > netflow.log], [0], [], [ignore])
-AT_CAPTURE_FILE([netflow.log])
-NETFLOW_PORT=`parse_listening_port < test-netflow.log`
-ovs-vsctl \
- set Bridge br0 netflow=@nf -- \
- --id=@nf create NetFlow targets=\"127.0.0.1:$NETFLOW_PORT\" \
- engine_id=1 engine_type=2 active_timeout=30 add-id-to-interface=false
-
-AT_CHECK([ovs-ofctl add-flow br0 action=normal])
-AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
-AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4,dst=10.0.0.3,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
-AT_CHECK([ovs-appctl dpif/dump-flows br0 | STRIP_XOUT], [0], [dnl
-skb_priority(0),in_port(1),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2/255.255.255.255,dst=10.0.0.1/255.255.255.255,proto=1/0xff,tos=0/0xfc,ttl=64/0,frag=no/0xff),icmp(type=8,code=0), packets:0, bytes:0, used:0.0s, actions: <del>
-skb_priority(0),in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4/255.255.255.255,dst=10.0.0.3/255.255.255.255,proto=1/0xff,tos=0/0xfc,ttl=64/0,frag=no/0xff),icmp(type=8,code=0), packets:0, bytes:0, used:0.0s, actions: <del>
-])
-OVS_VSWITCHD_STOP
-AT_CLEANUP
+# CHECK_MEGAFLOW_NETFLOW(LOOPBACK_ADDR, IP_VERSION_TYPE)
+#
+# IP_VERSION_TYPE is used in AT_SETUP
+m4_define([CHECK_MEGAFLOW_NETFLOW],
+ [AT_SETUP([ofproto-dpif megaflow - netflow - $2 collector])
+ OVS_VSWITCHD_START
+ ADD_OF_PORTS([br0], [1], [2])
+
+ dnl NetFlow configuration disables wildcarding relevant fields
+ ON_EXIT([kill `cat test-netflow.pid`])
+ AT_CHECK([test-netflow --log-file --detach --no-chdir --pidfile 0:$1 > netflow.log], [0], [], [ignore])
+ AT_CAPTURE_FILE([netflow.log])
+ m4_if([$1], [127.0.0.1],
+ [NETFLOW_PORT=`parse_listening_port < test-netflow.log`],
+ [NETFLOW_PORT=`parse_ipv6_listening_port < test-netflow.log`])
+ ovs-vsctl \
+ set Bridge br0 netflow=@nf -- \
+ --id=@nf create NetFlow targets=\"$1:$NETFLOW_PORT\" \
+ engine_id=1 engine_type=2 active_timeout=30 add-id-to-interface=false
+
+ AT_CHECK([ovs-ofctl add-flow br0 action=normal])
+ AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+ AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.4,dst=10.0.0.3,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+ AT_CHECK([ovs-appctl dpif/dump-megaflows br0 | STRIP_XOUT], [0], [dnl
+skb_priority=0,icmp,in_port=1,vlan_tci=0x0000/0x1fff,dl_src=50:54:00:00:00:09,dl_dst=50:54:00:00:00:0a,nw_src=10.0.0.2,nw_dst=10.0.0.1,nw_tos=0,nw_frag=no,icmp_type=8,icmp_code=0, n_subfacets:1, used:0.0s, Datapath actions: <del>
+skb_priority=0,icmp,in_port=1,vlan_tci=0x0000/0x1fff,dl_src=50:54:00:00:00:0b,dl_dst=50:54:00:00:00:0c,nw_src=10.0.0.4,nw_dst=10.0.0.3,nw_tos=0,nw_frag=no,icmp_type=8,icmp_code=0, n_subfacets:1, used:0.0s, Datapath actions: <del>
+])
+ OVS_VSWITCHD_STOP
+ AT_CLEANUP])
+
+CHECK_MEGAFLOW_NETFLOW([127.0.0.1], [IPv4])
+CHECK_MEGAFLOW_NETFLOW([::1], [IPv6])
AT_SETUP([ofproto-dpif megaflow - normal, active-backup bonding])
OVS_VSWITCHD_START(
diff --git a/tests/ofproto-macros.at b/tests/ofproto-macros.at
index 3bcffc2..c7ec8e4 100644
--- a/tests/ofproto-macros.at
+++ b/tests/ofproto-macros.at
@@ -30,6 +30,23 @@ s/ hard_age=[0-9]*,//
# TCP_PORT=`parse_listening_port < ovsdb-server.log`
parse_listening_port () {
sed -n 's/.*0:127\.0\.0\.1: listening on port \([0-9]*\)$/\1/p'
+}
+
+# parse_ipv6_listening_port [SERVER]
+#
+# Parses the TCP or SSL port on which a server is listening from the
+# log, given that the server was told to listen on a kernel-chosen
+# port, file provided on stdin, and prints the port number on stdout.
+# You should specify the listening remote as ptcp:0:::1 or
+# pssl:0:::1.
+#
+# Here's an example of how to use this with ovsdb-server:
+#
+# OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+# ovsdb-server --log-file --remote=ptcp:0:::1 ...
+# TCP_PORT=`parse_ipv6_listening_port < ovsdb-server.log`
+parse_ipv6_listening_port () {
+ sed -n 's/.*0:::1: listening on port \([0-9]*\)$/\1/p'
}]
m4_divert_pop([PREPARE_TESTS])
diff --git a/tests/ovs-vsctl.at b/tests/ovs-vsctl.at
index 851e4d8..ecebe20 100644
--- a/tests/ovs-vsctl.at
+++ b/tests/ovs-vsctl.at
@@ -414,7 +414,7 @@ CHECK_IFACES([a], [a1], [a2], [a3])
OVS_VSCTL_CLEANUP
AT_CLEANUP
-AT_SETUP([controllers])
+AT_SETUP([controllers IPv4])
AT_KEYWORDS([controller ovs-vsctl])
OVS_VSCTL_SETUP
AT_CHECK([RUN_OVS_VSCTL_TOGETHER(
@@ -440,6 +440,32 @@ tcp:5.4.3.2\ntcp:8.9.10.11
OVS_VSCTL_CLEANUP
AT_CLEANUP
+AT_SETUP([controllers IPv6])
+AT_KEYWORDS([controller ovs-vsctl])
+OVS_VSCTL_SETUP
+AT_CHECK([RUN_OVS_VSCTL_TOGETHER(
+ [add-br br0],
+
+ [get-controller br0],
+ [set-controller br0 tcp:2607:f0d0:2001:a::10],
+ [get-controller br0],
+
+ [del-controller br0],
+ [get-controller br0],
+
+ [set-controller br0 tcp:2607:f0d0:2001:a::11 tcp:2607:f0d0:2001:a::12],
+ [get-controller br0])], [0], [
+
+
+tcp:2607:f0d0:2001:a::10
+
+
+
+tcp:2607:f0d0:2001:a::11\ntcp:2607:f0d0:2001:a::12
+], [], [OVS_VSCTL_CLEANUP])
+OVS_VSCTL_CLEANUP
+AT_CLEANUP
+
dnl ----------------------------------------------------------------------
dnl OVS_VSCTL_SETUP_SIMPLE_FAKE_CONF([VLAN])
m4_define([OVS_VSCTL_SETUP_SIMPLE_FAKE_CONF],
diff --git a/tests/ovsdb-idl.at b/tests/ovsdb-idl.at
index 9ff7b1b..dd9ffa0 100644
--- a/tests/ovsdb-idl.at
+++ b/tests/ovsdb-idl.at
@@ -72,10 +72,32 @@ m4_define([OVSDB_CHECK_IDL_TCP_PY],
OVSDB_SERVER_SHUTDOWN
AT_CLEANUP])
+# same as OVSDB_CHECK_IDL but uses the Python IDL implementation with tcp6
+m4_define([OVSDB_CHECK_IDL_TCP6_PY],
+ [AT_SETUP([$1 - Python tcp6])
+ AT_SKIP_IF([test $HAVE_PYTHON = no])
+ AT_KEYWORDS([ovsdb server idl positive Python with tcp6 socket $5])
+ OVS_RUNDIR=`pwd`; export OVS_RUNDIR
+ OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+ AT_CHECK([ovsdb-tool create db $abs_srcdir/idltest.ovsschema],
+ [0], [stdout], [ignore])
+ AT_CHECK([ovsdb-server --log-file '-vPATTERN:console:ovsdb-server|%c|%m' --detach --no-chdir --pidfile="`pwd`"/pid --remote=ptcp:0:::1 --unixctl="`pwd`"/unixctl db], [0], [ignore], [ignore])
+ TCP_PORT=`parse_ipv6_listening_port < ovsdb-server.log`
+
+ m4_if([$2], [], [],
+ [AT_CHECK([ovsdb-client transact tcp:::1:$TCP_PORT $2], [0], [ignore], [ignore], [kill `cat pid`])])
+ AT_CHECK([$PYTHON $srcdir/test-ovsdb.py -t10 idl $srcdir/idltest.ovsschema tcp:::1:$TCP_PORT $3],
+ [0], [stdout], [ignore], [kill `cat pid`])
+ AT_CHECK([sort stdout | ${PERL} $srcdir/uuidfilt.pl]m4_if([$6],,, [[| $6]]),
+ [0], [$4], [], [kill `cat pid`])
+ OVSDB_SERVER_SHUTDOWN
+ AT_CLEANUP])
+
m4_define([OVSDB_CHECK_IDL],
[OVSDB_CHECK_IDL_C($@)
OVSDB_CHECK_IDL_PY($@)
- OVSDB_CHECK_IDL_TCP_PY($@)])
+ OVSDB_CHECK_IDL_TCP_PY($@)
+ OVSDB_CHECK_IDL_TCP6_PY($@)])
OVSDB_CHECK_IDL([simple idl, initially empty, no ops],
[],
diff --git a/tests/ovsdb-server.at b/tests/ovsdb-server.at
index 444ab96..0d5b1c4 100644
--- a/tests/ovsdb-server.at
+++ b/tests/ovsdb-server.at
@@ -1,6 +1,6 @@
AT_BANNER([OVSDB -- ovsdb-server transactions (Unix sockets)])
-m4_define([OVSDB_SERVER_SHUTDOWN],
+m4_define([OVSDB_SERVER_SHUTDOWN],
[cp pid savepid
AT_CHECK([ovs-appctl -t "`pwd`"/unixctl -e exit], [0], [ignore], [ignore])
OVS_WAIT_WHILE([kill -0 `cat savepid`], [kill `cat savepid`])])
@@ -19,14 +19,14 @@ m4_define([OVSDB_SERVER_SHUTDOWN],
# same marker.
#
# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_EXECUTION],
+m4_define([OVSDB_CHECK_EXECUTION],
[AT_SETUP([$1])
OVS_RUNDIR=`pwd`; export OVS_RUNDIR
AT_KEYWORDS([ovsdb server positive unix $5])
$2 > schema
AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
AT_CHECK([ovsdb-server --detach --no-chdir --pidfile="`pwd`"/pid --remote=punix:socket --unixctl="`pwd`"/unixctl db], [0], [ignore], [ignore])
- m4_foreach([txn], [$3],
+ m4_foreach([txn], [$3],
[AT_CHECK([ovsdb-client transact unix:socket 'txn'], [0], [stdout], [ignore],
[test ! -e pid || kill `cat pid`])
cat stdout >> output
@@ -153,7 +153,7 @@ AT_CHECK([ovsdb-tool create db1 schema1], [0], [ignore], [ignore])
AT_CHECK([ovsdb-tool create db2 schema2], [0], [ignore], [ignore])
AT_CHECK([ovsdb-server --detach --no-chdir --pidfile="`pwd`"/pid --unixctl="`pwd`"/unixctl --remote=punix:socket db1 db2], [0], [ignore], [ignore])
AT_CHECK(
- [[ovsdb-client list-dbs unix:socket]],
+ [[ovsdb-client list-dbs unix:socket]],
[0], [constraints
ordinals
], [ignore], [test ! -e pid || kill `cat pid`])
@@ -363,10 +363,10 @@ AT_CHECK(
"columns": ["target", "is_connected"]}]']],
[0], [stdout], [ignore])
AT_CHECK(
- [${PERL} $srcdir/uuidfilt.pl stdout],
- [0],
+ [${PERL} $srcdir/uuidfilt.pl stdout],
+ [0],
[[[{"rows":[{"managers":"punix:socket1"}]},{"rows":[{"is_connected":false,"target":"punix:socket2"}]}]
-]],
+]],
[ignore])
AT_CLEANUP
@@ -476,59 +476,69 @@ OVS_WAIT_UNTIL(
AT_CHECK([test ! -e socket1])
AT_CLEANUP
-AT_SETUP([SSL db: implementation])
-AT_KEYWORDS([ovsdb server positive ssl $5])
-AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
-PKIDIR=$abs_top_builddir/tests
-AT_SKIP_IF([expr "$PKIDIR" : ".*[ '\"
+# CHECK_SSL_DB_IMPLEMENTATION(LOOPBACK_ADDR, IP_VERSION_TYPE)
+#
+# IP_VERSION_TYPE is used in AT_SETUP
+m4_define([CHECK_SSL_DB_IMPLEMENTATION],
+ [AT_SETUP([SSL db: implementation using $2])
+ AT_KEYWORDS([ovsdb server positive ssl $5])
+ AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
+ PKIDIR=$abs_top_builddir/tests
+ AT_SKIP_IF([expr "$PKIDIR" : ".*[ '\"
\\]"])
-AT_DATA([schema],
- [[{"name": "mydb",
- "tables": {
- "SSL": {
- "columns": {
- "private_key": {"type": "string"},
- "certificate": {"type": "string"},
- "ca_cert": {"type": "string"}}}}}
+ AT_DATA([schema],
+ [[{"name": "mydb",
+ "tables": {
+ "SSL": {
+ "columns": {
+ "private_key": {"type": "string"},
+ "certificate": {"type": "string"},
+ "ca_cert": {"type": "string"}}}}}
]])
-AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
-AT_CHECK(
- [[ovsdb-tool transact db \
- '["mydb",
- {"op": "insert",
- "table": "SSL",
- "row": {"private_key": "'"$PKIDIR/testpki-privkey2.pem"'",
- "certificate": "'"$PKIDIR/testpki-cert2.pem"'",
- "ca_cert": "'"$PKIDIR/testpki-cacert.pem"'"}}]']],
- [0], [ignore], [ignore])
-OVS_LOGDIR=`pwd`; export OVS_LOGDIR
-AT_CHECK(
- [ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid \
- --private-key=db:mydb,SSL,private_key \
- --certificate=db:mydb,SSL,certificate \
- --ca-cert=db:mydb,SSL,ca_cert \
- --remote=pssl:0:127.0.0.1 --unixctl="`pwd`"/unixctl db],
- [0], [ignore], [ignore])
-SSL_PORT=`parse_listening_port < ovsdb-server.log`
-AT_CHECK(
- [[ovsdb-client \
- --private-key=$PKIDIR/testpki-privkey.pem \
- --certificate=$PKIDIR/testpki-cert.pem \
- --ca-cert=$PKIDIR/testpki-cacert.pem \
- transact ssl:127.0.0.1:$SSL_PORT \
- '["mydb",
- {"op": "select",
- "table": "SSL",
- "where": [],
- "columns": ["private_key"]}]']],
- [0], [stdout], [ignore], [test ! -e pid || kill `cat pid`])
-cat stdout >> output
-AT_CHECK_UNQUOTED(
- [cat output], [0],
- [[[{"rows":[{"private_key":"$PKIDIR/testpki-privkey2.pem"}]}]
+ AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
+ AT_CHECK(
+ [[ovsdb-tool transact db \
+ '["mydb",
+ {"op": "insert",
+ "table": "SSL",
+ "row": {"private_key": "'"$PKIDIR/testpki-privkey2.pem"'",
+ "certificate": "'"$PKIDIR/testpki-cert2.pem"'",
+ "ca_cert": "'"$PKIDIR/testpki-cacert.pem"'"}}]']],
+ [0], [ignore], [ignore])
+ OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+ AT_CHECK(
+ [ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid \
+ --private-key=db:mydb,SSL,private_key \
+ --certificate=db:mydb,SSL,certificate \
+ --ca-cert=db:mydb,SSL,ca_cert \
+ --remote=pssl:0:$1 --unixctl="`pwd`"/unixctl db],
+ [0], [ignore], [ignore])
+ m4_if([$1], [127.0.0.1],
+ [SSL_PORT=`parse_listening_port < ovsdb-server.log`],
+ [SSL_PORT=`parse_ipv6_listening_port < ovsdb-server.log`])
+
+ AT_CHECK(
+ [[ovsdb-client \
+ --private-key=$PKIDIR/testpki-privkey.pem \
+ --certificate=$PKIDIR/testpki-cert.pem \
+ --ca-cert=$PKIDIR/testpki-cacert.pem \
+ transact ssl:$1:$SSL_PORT \
+ '["mydb",
+ {"op": "select",
+ "table": "SSL",
+ "where": [],
+ "columns": ["private_key"]}]']],
+ [0], [stdout], [ignore], [test ! -e pid || kill `cat pid`])
+ cat stdout >> output
+ AT_CHECK_UNQUOTED(
+ [cat output], [0],
+ [[[{"rows":[{"private_key":"$PKIDIR/testpki-privkey2.pem"}]}]
]], [ignore], [test ! -e pid || kill `cat pid`])
-OVSDB_SERVER_SHUTDOWN
-AT_CLEANUP
+ OVSDB_SERVER_SHUTDOWN
+ AT_CLEANUP])
+
+CHECK_SSL_DB_IMPLEMENTATION([127.0.0.1], [IPv4])
+CHECK_SSL_DB_IMPLEMENTATION([::1], [IPv6])
AT_SETUP([compacting online])
AT_KEYWORDS([ovsdb server compact])
@@ -663,7 +673,7 @@ _uuid name number
OVSDB_SERVER_SHUTDOWN
AT_CLEANUP
-AT_BANNER([OVSDB -- ovsdb-server transactions (SSL sockets)])
+AT_BANNER([OVSDB -- ovsdb-server transactions (SSL IPv4 sockets)])
# OVSDB_CHECK_EXECUTION(TITLE, SCHEMA, TRANSACTIONS, OUTPUT, [KEYWORDS])
#
@@ -679,7 +689,7 @@ AT_BANNER([OVSDB -- ovsdb-server transactions (SSL sockets)])
# same marker.
#
# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_EXECUTION],
+m4_define([OVSDB_CHECK_EXECUTION],
[AT_SETUP([$1])
AT_KEYWORDS([ovsdb server positive ssl $5])
AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
@@ -690,7 +700,7 @@ m4_define([OVSDB_CHECK_EXECUTION],
AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
AT_CHECK([ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid --private-key=$PKIDIR/testpki-privkey2.pem --certificate=$PKIDIR/testpki-cert2.pem --ca-cert=$PKIDIR/testpki-cacert.pem --remote=pssl:0:127.0.0.1 --unixctl="`pwd`"/unixctl db], [0], [ignore], [ignore])
SSL_PORT=`parse_listening_port < ovsdb-server.log`
- m4_foreach([txn], [$3],
+ m4_foreach([txn], [$3],
[AT_CHECK([ovsdb-client --private-key=$PKIDIR/testpki-privkey.pem --certificate=$PKIDIR/testpki-cert.pem --ca-cert=$PKIDIR/testpki-cacert.pem transact ssl:127.0.0.1:$SSL_PORT 'txn'], [0], [stdout], [ignore],
[test ! -e pid || kill `cat pid`])
cat stdout >> output
@@ -702,7 +712,46 @@ cat stdout >> output
EXECUTION_EXAMPLES
-AT_BANNER([OVSDB -- ovsdb-server transactions (TCP sockets)])
+AT_BANNER([OVSDB -- ovsdb-server transactions (SSL IPv6 sockets)])
+
+# OVSDB_CHECK_EXECUTION(TITLE, SCHEMA, TRANSACTIONS, OUTPUT, [KEYWORDS])
+#
+# Creates a database with the given SCHEMA, starts an ovsdb-server on
+# that database, and runs each of the TRANSACTIONS (which should be a
+# quoted list of quoted strings) against it with ovsdb-client one at a
+# time.
+#
+# Checks that the overall output is OUTPUT, but UUIDs in the output
+# are replaced by markers of the form <N> where N is a number. The
+# first unique UUID is replaced by <0>, the next by <1>, and so on.
+# If a given UUID appears more than once it is always replaced by the
+# same marker.
+#
+# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
+m4_define([OVSDB_CHECK_EXECUTION],
+ [AT_SETUP([$1])
+ AT_KEYWORDS([ovsdb server positive ssl6 $5])
+ AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
+ OVS_RUNDIR=`pwd`; export OVS_RUNDIR
+ OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+ $2 > schema
+ PKIDIR=$abs_top_builddir/tests
+ AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
+ AT_CHECK([ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid --private-key=$PKIDIR/testpki-privkey2.pem --certificate=$PKIDIR/testpki-cert2.pem --ca-cert=$PKIDIR/testpki-cacert.pem --remote=pssl:0:::1 --unixctl="`pwd`"/unixctl db], [0], [ignore], [ignore])
+ SSL_PORT=`parse_ipv6_listening_port < ovsdb-server.log`
+ m4_foreach([txn], [$3],
+ [AT_CHECK([ovsdb-client --private-key=$PKIDIR/testpki-privkey.pem --certificate=$PKIDIR/testpki-cert.pem --ca-cert=$PKIDIR/testpki-cacert.pem transact ssl:::1:$SSL_PORT 'txn'], [0], [stdout], [ignore],
+ [test ! -e pid || kill `cat pid`])
+cat stdout >> output
+])
+ AT_CHECK([${PERL} $srcdir/uuidfilt.pl output], [0], [$4], [ignore],
+ [test ! -e pid || kill `cat pid`])
+ OVSDB_SERVER_SHUTDOWN
+ AT_CLEANUP])
+
+EXECUTION_EXAMPLES
+
+AT_BANNER([OVSDB -- ovsdb-server transactions (TCP IPv4 sockets)])
AT_SETUP([ovsdb-client get-schema-version - tcp socket])
AT_KEYWORDS([ovsdb server positive tcp])
@@ -751,6 +800,56 @@ cat stdout >> output
AT_CLEANUP])
EXECUTION_EXAMPLES
+
+AT_BANNER([OVSDB -- ovsdb-server transactions (TCP IPv6 sockets)])
+
+AT_SETUP([ovsdb-client get-schema-version - tcp6 socket])
+AT_KEYWORDS([ovsdb server positive tcp6])
+ordinal_schema > schema
+AT_CHECK([ovsdb-tool create db schema], [0], [ignore], [ignore])
+OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+AT_CHECK([ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid --unixctl="`pwd`"/unixctl --remote=ptcp:0:::1 db], [0], [ignore], [ignore])
+TCP_PORT=`parse_ipv6_listening_port < ovsdb-server.log`
+AT_CHECK([ovsdb-client get-schema-version tcp:::1:$TCP_PORT ordinals], [0], [5.1.3
+])
+OVSDB_SERVER_SHUTDOWN
+AT_CLEANUP])
+
+# OVSDB_CHECK_EXECUTION(TITLE, SCHEMA, TRANSACTIONS, OUTPUT, [KEYWORDS])
+#
+# Creates a database with the given SCHEMA, starts an ovsdb-server on
+# that database, and runs each of the TRANSACTIONS (which should be a
+# quoted list of quoted strings) against it with ovsdb-client one at a
+# time.
+#
+# Checks that the overall output is OUTPUT, but UUIDs in the output
+# are replaced by markers of the form <N> where N is a number. The
+# first unique UUID is replaced by <0>, the next by <1>, and so on.
+# If a given UUID appears more than once it is always replaced by the
+# same marker.
+#
+# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
+m4_define([OVSDB_CHECK_EXECUTION],
+ [AT_SETUP([$1])
+ AT_KEYWORDS([ovsdb server positive tcp6 $5])
+ OVS_RUNDIR=`pwd`; export OVS_RUNDIR
+ OVS_LOGDIR=`pwd`; export OVS_LOGDIR
+ $2 > schema
+ PKIDIR=$abs_top_builddir/tests
+ AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
+ AT_CHECK([ovsdb-server --log-file --detach --no-chdir --pidfile="`pwd`"/pid --remote=ptcp:0:::1 --unixctl="`pwd`"/unixctl db], [0], [ignore], [ignore])
+ TCP_PORT=`parse_ipv6_listening_port < ovsdb-server.log`
+ m4_foreach([txn], [$3],
+ [AT_CHECK([ovsdb-client transact tcp:::1:$TCP_PORT 'txn'], [0], [stdout], [ignore],
+ [test ! -e pid || kill `cat pid`])
+cat stdout >> output
+])
+ AT_CHECK([${PERL} $srcdir/uuidfilt.pl output], [0], [$4], [ignore],
+ [test ! -e pid || kill `cat pid`])
+ OVSDB_SERVER_SHUTDOWN
+ AT_CLEANUP])
+
+EXECUTION_EXAMPLES
AT_BANNER([OVSDB -- transactions on transient ovsdb-server])
@@ -771,13 +870,13 @@ AT_BANNER([OVSDB -- transactions on transient ovsdb-server])
# same marker.
#
# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_EXECUTION],
+m4_define([OVSDB_CHECK_EXECUTION],
[AT_SETUP([$1])
AT_KEYWORDS([ovsdb server positive transient $5])
OVS_RUNDIR=`pwd`; export OVS_RUNDIR
$2 > schema
AT_CHECK([ovsdb-tool create db schema], [0], [stdout], [ignore])
- m4_foreach([txn], [$3],
+ m4_foreach([txn], [$3],
[AT_DATA([txnfile], [ovsdb-client transact unix:socket 'txn'
])
AT_CHECK([ovsdb-server --remote=punix:socket --unixctl="`pwd`"/unixctl db --run="sh txnfile"], [0], [stdout], [ignore])
--
1.7.10.4
More information about the dev
mailing list