[ovs-dev] 答复: Reply: ovs + dpdk vhost-user match flows but cannot execute actions
lifuqiong
lifuqiong at cncloudsec.com
Wed Apr 20 00:30:30 UTC 2016
Hi Mauricio Vasquez:
root at host52:~# ovs-vsctl show
f2664a74-7523-4240-812a-4f022051346a
Bridge "ovsbr0"
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
Port "dpdk0"
Interface "dpdk0"
type: dpdk
Port "ovsbr0"
Interface "ovsbr0"
type: internal
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "dpdk1"
Interface "dpdk1"
type: dpdk
root at host52:~# ovs-ofctl dump-flows ovsbr0
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=291278.976s, table=0, n_packets=4414, n_bytes=392730, idle_age=65534, hard_age=65534, priority=0 actions=NORMAL
root at host52:~# ovs-ofctl dump-ports ovsbr0
OFPST_PORT reply (xid=0x2): 5 ports
port 4: rx pkts=2472, bytes=207008, drop=?, errs=0, frame=?, over=?, crc=?
tx pkts=1893, bytes=181572, drop=49, errs=?, coll=?
port LOCAL: rx pkts=23, bytes=1278, drop=0, errs=0, frame=0, over=0, crc=0
tx pkts=631, bytes=28750, drop=0, errs=0, coll=0
port 1: rx pkts=272, bytes=26283, drop=127396, errs=0, frame=?, over=?, crc=?
tx pkts=0, bytes=0, drop=0, errs=0, coll=?
port 2: rx pkts=0, bytes=0, drop=0, errs=0, frame=?, over=?, crc=?
tx pkts=0, bytes=0, drop=0, errs=0, coll=?
port 3: rx pkts=1919, bytes=184174, drop=?, errs=0, frame=?, over=?, crc=?
tx pkts=2462, bytes=205658, drop=0, errs=?, coll=?
Thank you.
发件人: Mauricio Vásquez [mailto:mauricio.vasquezbernal at studenti.polito.it]
发送时间: 2016年4月19日 21:49
收件人: lifuqiong
抄送: dev at openvswitch.org
主题: Re: Reply: [ovs-dev] ovs + dpdk vhost-user match flows but cannot execute actions
Hi lifuqiong,
Could you provide the output of the following commands in your setup?:
ovs-vsctl show
ovs-ofctl dump-flows
ovs-ofctl dump-ports
Mauricio Vasquez,
On Sat, Apr 16, 2016 at 10:23 AM, lifuqiong <lifuqiong at cncloudsec.com> wrote:
Hi Mauricio:
I changed my qemu version from 2.2.1 to 2.5.0 and the vms can communication with each other. But the VM cannot ping PC in the outside network. They in a same subnet.
PC(192.168.0.103/24) ping vm(192.168.0.90); vm’s host’s dpdk NIC and PC are in a L2 switch. And DPDK NIC connected to switch’s Port Eth1/0/8
Investigation:
Binding VM’s IP and Mac in PC’s ARP table, and binding VM’s Mac in Port Eth1/0/8; PC is pinging vm, I can see Output packets of Eth1/0/8 increasing regularly, which means the ping request packet has send to DPDK NIC.
But the VM can not receive the packet?
My switch has NO vlan , the default VLAN is 1. But when I ping from vm1 to vm2 , showing MaC address in OVS which shows as follows:
port VLAN MAC Age
4 0 00:00:00:00:02:12 1
3 0 00:00:00:00:00:04 1
What was the reason why VM cannot communication with the PC? Thank you
发件人: lifuqiong [mailto:lifuqiong at cncloudsec.com]
发送时间: 2016年4月15日 9:22
收件人: 'Mauricio Vásquez'
抄送: 'dev at openvswitch.org'
主题: 答复: [ovs-dev] ovs + dpdk vhost-user match flows but cannot execute actions
Hello Mauricio Vasquez:
It works. Thank you very much.
发件人: Mauricio Vásquez [mailto:mauricio.vasquezbernal at studenti.polito.it]
发送时间: 2016年4月14日 14:55
收件人: lifuqiong
抄送: dev at openvswitch.org
主题: Re: [ovs-dev] ovs + dpdk vhost-user match flows but cannot execute actions
Hello lifuqiong,
I faced the same problem some days ago (http://openvswitch.org/pipermail/dev/2016-March/068282.html), the bug is already fixed.
Where are you downloading OVS from?, it appears that the bug is still present in the version on http://openvswitch.org/releases/openvswitch-2.5.0.tar.gz, please download ovs from git and switch to branch-2.5.
Mauricio Vasquez,
On Thu, Apr 14, 2016 at 4:28 AM, lifuqiong <lifuqiong at cncloudsec.com> wrote:
I want to test dpdk vhost-user port on ovs to follow https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200;
I create ovs+dpdk environment followed INSTALL.DPDK.md; and create 2 VM2, try to ping each other but show me “Destination Host Unreachable”;
Dump-flows shows packets matched the flow, but can’t output to port 4, why ? I can’t get any useful error or warning info from ovs-vswitchd.log.
While ping from vm1 to vm2, statistics on vm1 shows that eth1 RX_packet keeps zero, TX_PACKET keeps increasing.
1.
OVS: 2.5.0
Dpdk: 2.2.0
Qemu: 2.2.1
2. ovs-ofctl dump-flows ovsbr0
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=836.946s, table=0, n_packets=628, n_bytes=26376, idle_age=0, in_port=3 actions=output:4
cookie=0x0, duration=831.458s, table=0, n_packets=36, n_bytes=1512, idle_age=770, in_port=4 actions=output:3
3. root at host152:/usr/local/var/run/openvswitch# ovs-vsctl show
03ae6f7d-3b71-45e3-beb0-09fa11292eaa
Bridge "ovsbr0"
Port "vhost-user-1"
Interface "vhost-user-1"
type: dpdkvhostuser
Port "ovsbr0"
Interface "ovsbr0"
type: internal
Port "dpdk1"
Interface "dpdk1"
type: dpdk
Port "vhost-user-0"
Interface "vhost-user-0"
type: dpdkvhostuser
Port "dpdk0"
Interface "dpdk0"
type: dpdk
4. Start VM info:
qemu-system-x86_64 -m 1024 -smp 2 -hda /root/vm11.qcow2 -boot c -enable-kvm -vnc 0.0.0.0:1 -chardev socket,id=char1,path=/usr/local/var/run/openvswitch/vhost-user-0 -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:01:12,netdev=mynet1 -object memory-backend-file,id=mem,size=1024M,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -d exec
qemu-system-x86_64: -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce: chardev "char1" went up
5. My build command as follows:
#!/bin/bash
################ config and compile dpdk ################ # cd dpdk # make config T=x86_64-native-linuxapp-gcc # make install T=x86_64-native-linuxapp-gcc ########################################################
################ config and compile ovs ################ # cd ovs # ./boot.sh # ./configure --localstatedir=/var --with-dpdk=/root/workplane/dpdk/x86_64-native-linuxapp-gcc
# make
# make install
########################################################
################ config and compile qemu ################ # cd qemu # ./configure # make # make install ########################################################
## set hugepage number, use boot cmdline or procfs echo 8 > /proc/sys/vm/nr_hugepages
## insert the kernel modules
modprobe uio
insmod $DPDK_BUILD/kmod/igb_uio.ko
insmod $DPDK_BUILD/kmod/rte_kni.ko
insmod $DPDK_DIR/lib/librte_vhost/eventfd_link/eventfd_link.ko
# unbind the dpdk interface
$DPDK_DIR/tools/dpdk_nic_bind.py --bind=igb_uio 01:00.0 $DPDK_DIR/tools/dpdk_nic_bind.py --bind=igb_uio 01:00.1
#Mount hugetable
mkdir -p /dev/hugepages
mount -t hugetlbfs -o pagesize=1G none /dev/hugepages
#first time
#ovsdb-tool create /usr/local/etc/openvswitch/conf.db /usr/local/share/openvswitch/vswitch.ovsschema
ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,Open_vSwitch,manager_options --pidfile --detach --log-file
#firsttime only
#ovs-vsctl --no-wait init
ovs-vswitchd --dpdk -c 0x77 -n 2 --socket-mem 2048,0 -- unix:$DB_SOCK --pidfile --detach --log-file
##############################################################################
## Add brige
/usr/local/bin/ovs-vsctl add-br ovsbr0 -- set bridge ovsbr0 datapath_type=netdev
## Add dpdk port
/usr/local/bin/ovs-vsctl add-port ovsbr0 dpdk0 -- set Interface dpdk0 type=dpdk /usr/local/bin/ovs-vsctl add-port ovsbr0 dpdk1 -- set Interface dpdk1 type=dpdk # /usr/local/bin/ovs-vsctl add-port ovsbr0 dpdk2 -- set Interface dpdk2 type=dpdk # /usr/local/bin/ovs-vsctl add-port ovsbr0 dpdk3 -- set Interface dpdk3 type=dpdk
## Add vhost-user port
/usr/local/bin/ovs-vsctl add-port ovsbr0 vhost-user-0 -- set Interface vhost-user-0 type=dpdkvhostuser /usr/local/bin/ovs-vsctl add-port ovsbr0 vhost-user-1 -- set Interface vhost-user-1 type=dpdkvhostuser
_______________________________________________
dev mailing list
dev at openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
More information about the dev
mailing list