[ovs-dev] [PATCH v5 3/6] dpif-netdev: Count the rxq processing cycles for an rxq.

Darrell Ball dball at vmware.com
Thu Aug 24 08:44:58 UTC 2017


    On 8/23/17, 6:34 AM, "Kevin Traynor" <ktraynor at redhat.com> wrote:
    
        Count the cycles used for processing an rxq during the
        pmd rxq interval. As this is an in flight counter and
        pmds run independently, also store the total cycles used
        during the last full interval.
        
        Signed-off-by: Kevin Traynor <ktraynor at redhat.com>
        ---
         lib/dpif-netdev.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++----
         1 file changed, 73 insertions(+), 5 deletions(-)
        
        diff --git a/lib/dpif-netdev.c b/lib/dpif-netdev.c
        index 51d4050..5670c55 100644
        --- a/lib/dpif-netdev.c
        +++ b/lib/dpif-netdev.c
        @@ -182,4 +182,8 @@ struct emc_cache {
         #define DPCLS_OPTIMIZATION_INTERVAL 1000
         
        +/* Time in ms of the interval in which rxq processing cycles used in
        + * rxq to pmd assignments is measured and stored. */
        +#define PMD_RXQ_INTERVAL_LEN 10000
        +
         /* Number of intervals for which cycles are stored
          * and used during rxq to pmd assignment. */
        @@ -568,4 +572,6 @@ struct dp_netdev_pmd_thread {
             /* Periodically sort subtable vectors according to hit frequencies */
             long long int next_optimization;
        +    /* Periodically store the processing cycles used for each rxq. */

The above comment seems a bit deceiving; should it say something like ‘the end of the next time interval
for which processing cycles are stored for each rxq’ 

        +    long long int rxq_interval;


             /* Statistics. */
        @@ -694,5 +700,16 @@ static void pmd_load_cached_ports(struct dp_netdev_pmd_thread *pmd)
             OVS_REQUIRES(pmd->port_mutex);
         static inline void
        -dp_netdev_pmd_try_optimize(struct dp_netdev_pmd_thread *pmd);
        +dp_netdev_pmd_try_optimize(struct dp_netdev_pmd_thread *pmd,
        +                           struct polled_queue *poll_list, int poll_cnt);
        +static void
        +dp_netdev_rxq_set_cycles(struct dp_netdev_rxq *rx,
        +                         enum rxq_cycles_counter_type type,
        +                         unsigned long long cycles);
        +static uint64_t
        +dp_netdev_rxq_get_cycles(struct dp_netdev_rxq *rx,
        +                         enum rxq_cycles_counter_type type);
        +static void
        +dp_netdev_rxq_set_interval(struct dp_netdev_rxq *rx,
        +                           unsigned long long cycles);
         static void
         dpif_netdev_xps_revalidate_pmd(const struct dp_netdev_pmd_thread *pmd,
        @@ -3124,4 +3141,29 @@ cycles_count_intermediate(struct dp_netdev_pmd_thread *pmd,
         }
         
        +static void
        +dp_netdev_rxq_set_cycles(struct dp_netdev_rxq *rx,
        +                         enum rxq_cycles_counter_type type,
        +                         unsigned long long cycles)
        +{
        +   atomic_store_relaxed(&rx->cycles[type], cycles);
        +}
        +
        +static uint64_t
        +dp_netdev_rxq_get_cycles(struct dp_netdev_rxq *rx,
        +                         enum rxq_cycles_counter_type type)
        +{
        +    unsigned long long tmp;
        +    atomic_read_relaxed(&rx->cycles[type], &tmp);
        +    return tmp;

Could we use a name like ‘processing_cycles’ or something other than ‘tmp’ ?


        +}
        +
        +static void
        +dp_netdev_rxq_set_interval(struct dp_netdev_rxq *rx,
        +                           unsigned long long cycles)


_set_interval seems a bit vague ?; well at least to me ?
_set_intrv_cycles ?
same for _get_interval for patch 4 ?


        +{
        +   atomic_store_relaxed(&rx->cycles_intrvl[rx->intrvl_idx++
        +                                           % PMD_RXQ_INTERVAL_MAX], cycles);
        +}
        +
         static int
         dp_netdev_process_rxq_port(struct dp_netdev_pmd_thread *pmd,
        @@ -3168,5 +3210,5 @@ port_reconfigure(struct dp_netdev_port *port)
         {
             struct netdev *netdev = port->netdev;
        -    int i, err;
        +    int i, err, last_nrxq, j;

move ‘j’ down to the for loop and use unsigned
move  last_nrxq down to where it is first used
         
             port->need_reconfigure = false;
        @@ -3177,4 +3219,5 @@ port_reconfigure(struct dp_netdev_port *port)
                 port->rxqs[i].rx = NULL;
             }
        +    last_nrxq = port->n_rxq;

uint32_t last_nrxq = port->n_rxq;

             port->n_rxq = 0;
         
        @@ -3197,4 +3240,12 @@ port_reconfigure(struct dp_netdev_port *port)
             for (i = 0; i < netdev_n_rxq(netdev); i++) {
                 port->rxqs[i].port = port;
        +        if (i >= last_nrxq) {
        +            /* Only reset cycle stats for new queues */
        +            dp_netdev_rxq_set_cycles(&port->rxqs[i], RXQ_CYCLES_PROC_CURR, 0);
        +            dp_netdev_rxq_set_cycles(&port->rxqs[i], RXQ_CYCLES_PROC_HIST, 0);
        +            for (j = 0; j < PMD_RXQ_INTERVAL_MAX; j++) {

for (uint8_t j = 0; j < PMD_RXQ_INTERVAL_MAX; j++) {


        +                dp_netdev_rxq_set_interval(&port->rxqs[i], 0);
        +            }
        +        }
                 err = netdev_rxq_open(netdev, &port->rxqs[i].rx, i);
                 if (err) {
        @@ -3877,5 +3928,5 @@ reload:
                         dp_netdev_process_rxq_port(pmd, poll_list[i].rxq->rx,
                                                    poll_list[i].port_no);
        -            cycles_count_intermediate(pmd, NULL,
        +            cycles_count_intermediate(pmd, poll_list[i].rxq,
                                               process_packets ? PMD_CYCLES_PROCESSING
                                                               : PMD_CYCLES_IDLE);
        @@ -3888,5 +3939,5 @@ reload:
         
                     coverage_try_clear();
        -            dp_netdev_pmd_try_optimize(pmd);
        +            dp_netdev_pmd_try_optimize(pmd, poll_list, poll_cnt);
                     if (!ovsrcu_try_quiesce()) {
                         emc_cache_slow_sweep(&pmd->flow_cache);
        @@ -4332,4 +4383,5 @@ dp_netdev_configure_pmd(struct dp_netdev_pmd_thread *pmd, struct dp_netdev *dp,
             cmap_init(&pmd->classifiers);
             pmd->next_optimization = time_msec() + DPCLS_OPTIMIZATION_INTERVAL;
        +    pmd->rxq_interval = time_msec() + PMD_RXQ_INTERVAL_LEN;
             hmap_init(&pmd->poll_list);
             hmap_init(&pmd->tx_ports);
        @@ -5769,8 +5821,24 @@ dpcls_sort_subtable_vector(struct dpcls *cls)
         
         static inline void
        -dp_netdev_pmd_try_optimize(struct dp_netdev_pmd_thread *pmd)
        +dp_netdev_pmd_try_optimize(struct dp_netdev_pmd_thread *pmd,
        +                           struct polled_queue *poll_list, int poll_cnt)
         {
             struct dpcls *cls;
             long long int now = time_msec();
        +    int i;

move ‘i’ to for loop and use unsigned


        +    uint64_t rxq_cyc_curr;

move inside for loop

        +
        +    if (now > pmd->rxq_interval) {
        +        /* Get the cycles that were used to process each queue and store. */
        +        for (i = 0; i < poll_cnt; i++) {

for (uint32_t i = 0; i < poll_cnt; i++) {

        +            rxq_cyc_curr = dp_netdev_rxq_get_cycles(poll_list[i].rxq,
        +                                                    RXQ_CYCLES_PROC_CURR);
        +            dp_netdev_rxq_set_interval(poll_list[i].rxq, rxq_cyc_curr);
        +            dp_netdev_rxq_set_cycles(poll_list[i].rxq, RXQ_CYCLES_PROC_CURR,
        +                                     0);
        +        }
        +        /* Start new measuring interval */
        +        pmd->rxq_interval = now + PMD_RXQ_INTERVAL_LEN;
        +    }
         
             if (now > pmd->next_optimization) {
        -- 
        1.8.3.1
        
        
    
    





More information about the dev mailing list