[ovs-dev] [PATCH] Drop support for RHEL 5 and 6
Russell Bryant
russell at ovn.org
Tue Jan 16 16:44:43 UTC 2018
On Thu, Jan 11, 2018 at 11:36 AM, Timothy Redaelli <tredaelli at redhat.com> wrote:
> RHEL 6 is not supported anymore since it uses Python 2.6 and GCC 4.4.x,
> but Open vSwitch needs, at least, Python 2.7 and GCC 4.6 to build correctly.
>
> http://docs.openvswitch.org/en/latest/intro/install/general/#build-requirements
>
> CC: Gurucharan Shetty <guru at ovn.org>
> Signed-off-by: Timothy Redaelli <tredaelli at redhat.com>
Acked-by: Russell Bryant <russell at ovn.org>
I'm fine with this, but I'll let Guru comment as well before applying anything.
> ---
>
> This is the same, rejected, patch I sent as RFC since I have, in the
> meanwhile, sent another patchset (already merged) to add the requested
> "force-reload-kmod" support on RHEL7 ("ovs-systemd-reload force-reload-kmod").
>
> Documentation/automake.mk | 1 -
> Documentation/howto/docker.rst | 2 +-
> Documentation/index.rst | 1 -
> Documentation/intro/install/index.rst | 1 -
> Documentation/intro/install/rhel.rst | 238 ------------------------------
> rhel/.gitignore | 3 -
> rhel/automake.mk | 11 --
> rhel/openvswitch-kmod-rhel6.spec.in | 78 ----------
> rhel/openvswitch-kmod.files | 3 -
> rhel/openvswitch.spec.in | 267 ----------------------------------
> 10 files changed, 1 insertion(+), 604 deletions(-)
> delete mode 100644 Documentation/intro/install/rhel.rst
> delete mode 100644 rhel/openvswitch-kmod-rhel6.spec.in
> delete mode 100644 rhel/openvswitch-kmod.files
> delete mode 100644 rhel/openvswitch.spec.in
>
> diff --git a/Documentation/automake.mk b/Documentation/automake.mk
> index 2b202cb2a..e614b9de1 100644
> --- a/Documentation/automake.mk
> +++ b/Documentation/automake.mk
> @@ -18,7 +18,6 @@ DOC_SOURCE = \
> Documentation/intro/install/general.rst \
> Documentation/intro/install/netbsd.rst \
> Documentation/intro/install/ovn-upgrades.rst \
> - Documentation/intro/install/rhel.rst \
> Documentation/intro/install/userspace.rst \
> Documentation/intro/install/windows.rst \
> Documentation/intro/install/xenserver.rst \
> diff --git a/Documentation/howto/docker.rst b/Documentation/howto/docker.rst
> index ff8b708af..c3d4dbf20 100644
> --- a/Documentation/howto/docker.rst
> +++ b/Documentation/howto/docker.rst
> @@ -296,7 +296,7 @@ The "underlay" mode
> Depending on your VM, you can make the above step persistent across reboots.
> For example, if your VM is Debian/Ubuntu-based, read
> `openvswitch-switch.README.Debian` found in `debian` folder. If your VM is
> - RHEL-based, refer to :doc:`/intro/install/rhel`.
> + Fedora/RHEL7/CentOS7-based, refer to :doc:`/intro/install/fedora`.
>
> 3. Start the Open vSwitch network driver
>
> diff --git a/Documentation/index.rst b/Documentation/index.rst
> index ddffa3a62..dac14ba58 100644
> --- a/Documentation/index.rst
> +++ b/Documentation/index.rst
> @@ -86,7 +86,6 @@ Deeper Dive
> - **Testing** :doc:`topics/testing`
>
> - **Packaging:** :doc:`intro/install/debian` |
> - :doc:`intro/install/rhel` |
> :doc:`intro/install/fedora`
>
> The Open vSwitch Project
> diff --git a/Documentation/intro/install/index.rst b/Documentation/intro/install/index.rst
> index 3193c736c..626b49f12 100644
> --- a/Documentation/intro/install/index.rst
> +++ b/Documentation/intro/install/index.rst
> @@ -59,7 +59,6 @@ provided below.
> distributions
> debian
> fedora
> - rhel
>
> Upgrades
> --------
> diff --git a/Documentation/intro/install/rhel.rst b/Documentation/intro/install/rhel.rst
> deleted file mode 100644
> index f8b26069f..000000000
> --- a/Documentation/intro/install/rhel.rst
> +++ /dev/null
> @@ -1,238 +0,0 @@
> -..
> - Licensed under the Apache License, Version 2.0 (the "License"); you may
> - not use this file except in compliance with the License. You may obtain
> - a copy of the License at
> -
> - http://www.apache.org/licenses/LICENSE-2.0
> -
> - Unless required by applicable law or agreed to in writing, software
> - distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
> - WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
> - License for the specific language governing permissions and limitations
> - under the License.
> -
> - Convention for heading levels in Open vSwitch documentation:
> -
> - ======= Heading 0 (reserved for the title in a document)
> - ------- Heading 1
> - ~~~~~~~ Heading 2
> - +++++++ Heading 3
> - ''''''' Heading 4
> -
> - Avoid deeper levels because they do not render well.
> -
> -========================================
> -RHEL 5.6, 6.x Packaging for Open vSwitch
> -========================================
> -
> -This document describes how to build and install Open vSwitch on a Red Hat
> -Enterprise Linux (RHEL) host. If you want to install Open vSwitch on a generic
> -Linux host, refer to :doc:`general` instead.
> -
> -We have tested these instructions with RHEL 5.6 and RHEL 6.0.
> -
> -For RHEL 7.x (or derivatives, such as CentOS 7.x), you should follow the
> -instructions in the :doc:`fedora`. The Fedora spec files are used for RHEL
> -7.x.
> -
> -.. _rhel-prerequisites:
> -
> -Prerequisites
> --------------
> -
> -You may build from an Open vSwitch distribution tarball or from an Open vSwitch
> -Git tree.
> -
> -The default RPM build directory, ``_topdir``, has five directories in the
> -top-level.
> -
> -BUILD/
> - where the software is unpacked and built
> -RPMS/
> - where the newly created binary package files are written
> -SOURCES/
> - contains the original sources, patches, and icon files
> -SPECS/
> - contains the spec files for each package to be built
> -SRPMS/
> - where the newly created source package files are written
> -
> -Before you begin, note the RPM sources directory on your version of RHEL. The
> -command ``rpmbuild --showrc`` will show the configuration for each of those
> -directories. Alternatively, the command ``rpm --eval '%{_topdir}'`` shows the
> -current configuration for the top level directory and the command ``rpm --eval
> -'%{_sourcedir}'`` does the same for the sources directory. On RHEL 5, the
> -default RPM ``_topdir`` is ``/usr/src/redhat`` and the default RPM sources
> -directory is ``/usr/src/redhat/SOURCES``. On RHEL 6, the default ``_topdir`` is
> -``$HOME/rpmbuild`` and the default RPM sources directory is
> -``$HOME/rpmbuild/SOURCES``.
> -
> -Build Requirements
> -------------------
> -
> -You will need to install all required packages to build the RPMs.
> -The command below will install RPM tools and generic build dependencies::
> -
> - $ yum install @'Development Tools' rpm-build yum-utils
> -
> -Then it is necessary to install Open vSwitch specific build dependencies.
> -The dependencies are listed in the SPEC file, but first it is necessary
> -to replace the VERSION tag to be a valid SPEC.
> -
> -The command below will create a temporary SPEC file::
> -
> - $ sed -e 's/@VERSION@/0.0.1/' rhel/openvswitch.spec.in > /tmp/ovs.spec
> -
> -And to install specific dependencies, use yum-builddep tool::
> -
> - $ yum-builddep /tmp/ovs.spec
> -
> -Once that is completed, remove the file ``/tmp/ovs.spec``.
> -
> -If python-sphinx package is not available in your version of RHEL, you can
> -install it via pip with 'pip install sphinx'.
> -
> -Open vSwitch requires python 2.7 or newer which is not available in older
> -distributions. In the case of RHEL 6.x and its derivatives, one option is
> -to install python34 and python34-six from `EPEL`_.
> -
> -.. _EPEL: https://fedoraproject.org/wiki/EPEL
> -
> -.. _rhel-bootstrapping:
> -
> -Bootstrapping and Configuring
> ------------------------------
> -
> -If you are building from a distribution tarball, skip to :ref:`rhel-building`.
> -If not, you must be building from an Open vSwitch Git tree. Determine what
> -version of Autoconf is installed (e.g. run ``autoconf --version``). If it is
> -not at least version 2.63, then you must upgrade or use another machine to
> -build the packages.
> -
> -Assuming all requirements have been met, build the tarball by running::
> -
> - $ ./boot.sh
> - $ ./configure
> - $ make dist
> -
> -You must run this on a machine that has the tools listed in
> -:ref:`general-build-reqs` as prerequisites for building from a Git tree.
> -Afterward, proceed with the rest of the instructions using the distribution
> -tarball.
> -
> -Now you have a distribution tarball, named something like
> -``openvswitch-x.y.z.tar.gz``. Copy this file into the RPM sources directory,
> -e.g.::
> -
> - $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES
> -
> -Broken ``build`` symlink
> -~~~~~~~~~~~~~~~~~~~~~~~~
> -
> -Some versions of the RHEL 6 kernel-devel package contain a broken ``build``
> -symlink. If you are using such a version, you must fix the problem before
> -continuing.
> -
> -To find out whether you are affected, run::
> -
> - $ cd /lib/modules/<version>
> - $ ls -l build/
> -
> -where ``<version>`` is the version number of the RHEL 6 kernel.
> -
> -.. note::
> - The trailing slash in the final command is important. Be sure to include
> - it.
> -
> -If the ``ls`` command produces a directory listing, your kernel-devel package
> -is OK. If it produces a ``No such file or directory`` error, your kernel-devel
> -package is buggy.
> -
> -If your kernel-devel package is buggy, then you can fix it with::
> -
> - $ cd /lib/modules/<version>
> - $ rm build
> - $ ln -s /usr/src/kernels/<target> build
> -
> -where ``<target>`` is the name of an existing directory under
> -``/usr/src/kernels``, whose name should be similar to ``<version>`` but may
> -contain some extra parts. Once you have done this, verify the fix with the
> -same procedure you used above to check for the problem.
> -
> -.. _rhel-building:
> -
> -Building
> ---------
> -
> -You should have a distribution tarball named something like
> -openvswitch-x.y.z.tar.gz. Copy this file into the RPM sources directory::
> -
> - $ cp openvswitch-x.y.z.tar.gz $HOME/rpmbuild/SOURCES
> -
> -Make another copy of the distribution tarball in a temporary directory. Then
> -unpack the tarball and ``cd`` into its root::
> -
> - $ tar xzf openvswitch-x.y.z.tar.gz
> - $ cd openvswitch-x.y.z
> -
> -Userspace
> -~~~~~~~~~
> -
> -To build Open vSwitch userspace, run::
> -
> - $ rpmbuild -bb rhel/openvswitch.spec
> -
> -This produces two RPMs: "openvswitch" and "openvswitch-debuginfo".
> -
> -The above command automatically runs the Open vSwitch unit tests. To disable
> -the unit tests, run::
> -
> - $ rpmbuild -bb --without check rhel/openvswitch.spec
> -
> -.. note::
> - If the build fails with ``configure: error: source dir
> - /lib/modules/2.6.32-279.el6.x86_64/build doesn't exist`` or similar, then
> - the kernel-devel package is missing or buggy.
> -
> -Kernel Module
> -~~~~~~~~~~~~~
> -
> -On RHEL 6, to build the Open vSwitch kernel module, copy
> -rhel/openvswitch-kmod.files into the RPM sources directory and run::
> -
> - $ rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec
> -
> -You might have to specify a kernel version and/or variants, e.g.:
> -
> - $ rpmbuild -bb \
> - -D "kversion 2.6.32-131.6.1.el6.x86_64" \
> - -D "kflavors default debug kdump" \
> - rhel/openvswitch-kmod-rhel6.spec
> -
> -This produces an "kmod-openvswitch" RPM for each kernel variant, in this
> -example: "kmod-openvswitch", "kmod-openvswitch-debug", and
> -"kmod-openvswitch-kdump".
> -
> -.. _rhel-script-integrations:
> -
> -Red Hat Network Scripts Integration
> ------------------------------------
> -
> -A RHEL host has default firewall rules that prevent any Open vSwitch tunnel
> -traffic from passing through. If a user configures Open vSwitch tunnels like
> -Geneve, GRE, VXLAN, LISP etc., they will either have to manually add iptables
> -firewall rules to allow the tunnel traffic or add it through a startup script
> -Refer to the "enable-protocol" command in the ovs-ctl(8) manpage for more
> -information.
> -
> -In addition, simple integration with Red Hat network scripts has been
> -implemented. Refer to `README.RHEL.rst`__ in the source tree or
> -/usr/share/doc/openvswitch/README.RHEL.rst in the installed openvswitch package
> -for details.
> -
> -__ https://github.com/openvswitch/ovs/blob/master/rhel/README.RHEL.rst
> -
> -Reporting Bugs
> ---------------
> -
> -Report problems to bugs at openvswitch.org.
> diff --git a/rhel/.gitignore b/rhel/.gitignore
> index e584a1ed0..0fbcba69f 100644
> --- a/rhel/.gitignore
> +++ b/rhel/.gitignore
> @@ -1,7 +1,4 @@
> openvswitch-dkms.spec
> -openvswitch-kmod-rhel5.spec
> -openvswitch-kmod-rhel6.spec
> openvswitch-kmod-fedora.spec
> -openvswitch.spec
> openvswitch-fedora.spec
> usr_lib_systemd_system_ovs-vswitchd.service
> diff --git a/rhel/automake.mk b/rhel/automake.mk
> index 137ff4a39..e8abc0b65 100644
> --- a/rhel/automake.mk
> +++ b/rhel/automake.mk
> @@ -15,13 +15,8 @@ EXTRA_DIST += \
> rhel/etc_sysconfig_network-scripts_ifup-ovs \
> rhel/openvswitch-dkms.spec \
> rhel/openvswitch-dkms.spec.in \
> - rhel/openvswitch-kmod-rhel6.spec \
> - rhel/openvswitch-kmod-rhel6.spec.in \
> - rhel/openvswitch-kmod.files \
> rhel/openvswitch-kmod-fedora.spec \
> rhel/openvswitch-kmod-fedora.spec.in \
> - rhel/openvswitch.spec \
> - rhel/openvswitch.spec.in \
> rhel/openvswitch-fedora.spec \
> rhel/openvswitch-fedora.spec.in \
> rhel/usr_share_openvswitch_scripts_ovs-systemd-reload \
> @@ -48,15 +43,9 @@ update_rhel_spec = \
> $(srcdir)/rhel/openvswitch-dkms.spec: rhel/openvswitch-dkms.spec.in $(top_builddir)/config.status
> $(update_rhel_spec)
>
> -$(srcdir)/rhel/openvswitch-kmod-rhel6.spec: rhel/openvswitch-kmod-rhel6.spec.in $(top_builddir)/config.status
> - $(update_rhel_spec)
> -
> $(srcdir)/rhel/openvswitch-kmod-fedora.spec: rhel/openvswitch-kmod-fedora.spec.in $(top_builddir)/config.status
> $(update_rhel_spec)
>
> -$(srcdir)/rhel/openvswitch.spec: rhel/openvswitch.spec.in $(top_builddir)/config.status
> - $(update_rhel_spec)
> -
> $(srcdir)/rhel/openvswitch-fedora.spec: rhel/openvswitch-fedora.spec.in $(top_builddir)/config.status
> $(update_rhel_spec)
>
> diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in
> deleted file mode 100644
> index 8413b254f..000000000
> --- a/rhel/openvswitch-kmod-rhel6.spec.in
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -# Spec file for Open vSwitch kernel modules on Red Hat Enterprise
> -# Linux 6.
> -
> -# Copyright (C) 2011, 2012 Nicira, Inc.
> -#
> -# Copying and distribution of this file, with or without modification,
> -# are permitted in any medium without royalty provided the copyright
> -# notice and this notice are preserved. This file is offered as-is,
> -# without warranty of any kind.
> -
> -%define oname openvswitch
> -
> -Name: %{oname}-kmod
> -Version: @VERSION@
> -Release: 1%{?dist}
> -Summary: Open vSwitch kernel module
> -
> -Group: System/Kernel
> -License: GPLv2
> -URL: http://openvswitch.org/
> -Source0: %{oname}-%{version}.tar.gz
> -Source1: %{oname}-kmod.files
> -BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
> -BuildRequires: %kernel_module_package_buildreqs
> -
> -# Without this we get an empty openvswitch-debuginfo package (whose name
> -# conflicts with the openvswitch-debuginfo package for OVS userspace).
> -%undefine _enable_debug_packages
> -
> -# Use -D 'kversion 2.6.32-131.6.1.el6.x86_64' to build package
> -# for specified kernel version.
> -%{?kversion:%define kernel_version %kversion}
> -
> -# Use -D 'kflavors default debug kdump' to build packages for
> -# specified kernel variants.
> -%{!?kflavors:%define kflavors default}
> -
> -%kernel_module_package -n %{oname} -f %{SOURCE1} %kflavors
> -
> -%description
> -Open vSwitch Linux kernel module.
> -
> -%prep
> -
> -%setup -n %{oname}-%{version}
> -
> -%build
> -for flavor in %flavors_to_build; do
> - mkdir _$flavor
> - (cd _$flavor && ../configure --with-linux="%{kernel_source $flavor}")
> - %{__make} -C _$flavor/datapath/linux %{?_smp_mflags}
> -done
> -
> -%install
> -export INSTALL_MOD_PATH=$RPM_BUILD_ROOT
> -export INSTALL_MOD_DIR=extra/%{oname}
> -for flavor in %flavors_to_build ; do
> - make -C %{kernel_source $flavor} modules_install \
> - M="`pwd`"/_$flavor/datapath/linux
> -
> - # Cleanup unnecessary kernel-generated module dependency files.
> - find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \;
> -done
> -install -d %{buildroot}%{_sysconfdir}/depmod.d/
> -for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko;
> -do
> - modname="$(basename ${module})"
> - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf
> - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf
> -done
> -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/
> -
> -%files
> -%defattr(644,root,root)
> -/etc/depmod.d/%{oname}.conf
> -
> -%clean
> -rm -rf $RPM_BUILD_ROOT
> diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files
> deleted file mode 100644
> index 357c2e8b7..000000000
> --- a/rhel/openvswitch-kmod.files
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -%defattr(644,root,root,755)
> -/lib/modules/%2-%1
> -/etc/depmod.d/openvswitch.conf
> diff --git a/rhel/openvswitch.spec.in b/rhel/openvswitch.spec.in
> deleted file mode 100644
> index e510d351b..000000000
> --- a/rhel/openvswitch.spec.in
> +++ /dev/null
> @@ -1,267 +0,0 @@
> -# Spec file for Open vSwitch on Red Hat Enterprise Linux.
> -
> -# Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Nicira, Inc.
> -#
> -# Copying and distribution of this file, with or without modification,
> -# are permitted in any medium without royalty provided the copyright
> -# notice and this notice are preserved. This file is offered as-is,
> -# without warranty of any kind.
> -#
> -# If tests have to be skipped while building, specify the '--without check'
> -# option. For example:
> -# rpmbuild -bb --without check rhel/openvswitch.spec
> -#
> -# Support for executing kernel data path tests under rpmbuild is
> -# provided, however this is intended for use only in test environments
> -# and should not be used otherwise (these tests require root privileges).
> -# These tests can be executed, for example, via:
> -# rpmbuild -rb --with check_datapath_kernel openvswitch.src.rpm
> -#
> -# These tests will use the currently installed OVS kernel modules, when
> -# testing out of tree kernel modules the appropriate openvswitch-kmod
> -# package should be installed first.
> -
> -Name: openvswitch
> -Summary: Open vSwitch daemon/database/utilities
> -Group: System Environment/Daemons
> -URL: http://www.openvswitch.org/
> -Vendor: Nicira, Inc.
> -Version: @VERSION@
> -
> -License: ASL 2.0
> -Release: 1
> -Source: openvswitch-%{version}.tar.gz
> -Buildroot: /tmp/openvswitch-rpm
> -Requires: logrotate, hostname, python >= 2.7, python-six
> -BuildRequires: python-six
> -BuildRequires: openssl-devel
> -BuildRequires: checkpolicy, selinux-policy-devel
> -
> -%bcond_without check
> -%bcond_with check_datapath_kernel
> -
> -%description
> -Open vSwitch provides standard network bridging functions and
> -support for the OpenFlow protocol for remote per-flow control of
> -traffic.
> -
> -%package devel
> -Summary: Open vSwitch development package
> -Group: Development/Libraries
> -
> -%description devel
> -This package provides openvswitch headers and libopenvswitch for developers.
> -
> -%package selinux-policy
> -Summary: Open vSwitch SELinux policy
> -License: ASL 2.0
> -BuildArch: noarch
> -Requires: selinux-policy-targeted
> -
> -%description selinux-policy
> -Tailored Open vSwitch SELinux policy
> -
> -%prep
> -%setup -q
> -
> -%build
> -./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} \
> - --libdir=%{_libdir} --enable-ssl --enable-shared
> -make %{_smp_mflags}
> -make selinux/openvswitch-custom.te
> -cd selinux
> -make -f %{_datadir}/selinux/devel/Makefile
> -
> -%install
> -rm -rf $RPM_BUILD_ROOT
> -make install DESTDIR=$RPM_BUILD_ROOT
> -
> -rhel_cp() {
> - base=$1
> - mode=$2
> - dst=$RPM_BUILD_ROOT/$(echo $base | sed 's,_,/,g')
> - install -D -m $mode rhel/$base $dst
> -}
> -rhel_cp etc_init.d_openvswitch 0755
> -rhel_cp etc_logrotate.d_openvswitch 0644
> -rhel_cp etc_sysconfig_network-scripts_ifup-ovs 0755
> -rhel_cp etc_sysconfig_network-scripts_ifdown-ovs 0755
> -rhel_cp usr_share_openvswitch_scripts_sysconfig.template 0644
> -
> -install -p -m 644 -D selinux/openvswitch-custom.pp \
> - $RPM_BUILD_ROOT%{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp
> -
> -# Get rid of stuff we don't want to make RPM happy.
> -rm \
> - $RPM_BUILD_ROOT/usr/bin/ovs-testcontroller \
> - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-testcontroller.8 \
> - $RPM_BUILD_ROOT/usr/bin/ovs-test \
> - $RPM_BUILD_ROOT/usr/bin/ovs-l3ping \
> - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-test.8 \
> - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-l3ping.8 \
> - $RPM_BUILD_ROOT/usr/sbin/ovs-vlan-bug-workaround \
> - $RPM_BUILD_ROOT/usr/share/man/man8/ovs-vlan-bug-workaround.8 \
> - $RPM_BUILD_ROOT/usr/bin/ovn-* \
> - $RPM_BUILD_ROOT/usr/share/man/man?/ovn-* \
> - $RPM_BUILD_ROOT/usr/share/openvswitch/ovn-* \
> - $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/ovn*
> -(cd "$RPM_BUILD_ROOT" && rm -rf usr/%{_lib}/*.la)
> -(cd "$RPM_BUILD_ROOT" && rm -rf usr/include)
> -
> -install -d -m 0755 $RPM_BUILD_ROOT%{_rundir}/openvswitch
> -install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/log/openvswitch
> -install -d -m 0755 $RPM_BUILD_ROOT/var/lib/openvswitch
> -
> -copy_headers() {
> - src=$1
> - dst=$RPM_BUILD_ROOT/$2
> - install -d -m 0755 $dst
> - install -m 0644 $src/*.h $dst
> -}
> -copy_headers include %{_includedir}/openvswitch
> -copy_headers include/openflow %{_includedir}/openvswitch/openflow
> -copy_headers include/openvswitch %{_includedir}/openvswitch/openvswitch
> -copy_headers include/sparse %{_includedir}/openvswitch/sparse
> -copy_headers include/sparse/arpa %{_includedir}/openvswitch/sparse/arpa
> -copy_headers include/sparse/netinet %{_includedir}/openvswitch/sparse/netinet
> -copy_headers include/sparse/sys %{_includedir}/openvswitch/sparse/sys
> -copy_headers lib %{_includedir}/openvswitch/lib
> -
> -install -D -m 0644 lib/.libs/libopenvswitch.a \
> - $RPM_BUILD_ROOT/%{_libdir}/libopenvswitch.a
> -
> -%check
> -%if %{with check}
> - if make check TESTSUITEFLAGS='%{_smp_mflags}' RECHECK=yes; then :;
> - else
> - cat tests/testsuite.log
> - exit 1
> - fi
> -%endif
> -%if %{with check_datapath_kernel}
> - if make check-kernel RECHECK=yes; then :;
> - else
> - cat tests/system-kmod-testsuite.log
> - exit 1
> - fi
> -%endif
> -
> -%clean
> -rm -rf $RPM_BUILD_ROOT
> -
> -%post
> -# Create default or update existing /etc/sysconfig/openvswitch.
> -SYSCONFIG=/etc/sysconfig/openvswitch
> -TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
> -if [ ! -e $SYSCONFIG ]; then
> - cp $TEMPLATE $SYSCONFIG
> -else
> - for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
> - do
> - if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
> - echo >> $SYSCONFIG
> - sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
> - fi
> - done
> -fi
> -
> -# Ensure all required services are set to run
> -/sbin/chkconfig --add openvswitch
> -/sbin/chkconfig openvswitch on
> -
> -%post selinux-policy
> -/usr/sbin/semodule -i %{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp &> /dev/null || :
> -
> -%preun
> -if [ "$1" = "0" ]; then # $1 = 0 for uninstall
> - /sbin/service openvswitch stop
> - /sbin/chkconfig --del openvswitch
> -fi
> -
> -%postun
> -if [ "$1" = "0" ]; then # $1 = 0 for uninstall
> - rm -f /etc/openvswitch/conf.db
> - rm -f /etc/sysconfig/openvswitch
> - rm -f /etc/openvswitch/vswitchd.cacert
> -fi
> -
> -%postun selinux-policy
> -if [ $1 -eq 0 ] ; then
> - /usr/sbin/semodule -r openvswitch-custom &> /dev/null || :
> -fi
> -
> -exit 0
> -
> -%files
> -%defattr(-,root,root)
> -%dir /etc/openvswitch
> -/etc/bash_completion.d/ovs-appctl-bashcomp.bash
> -/etc/bash_completion.d/ovs-vsctl-bashcomp.bash
> -/etc/init.d/openvswitch
> -%config(noreplace) /etc/logrotate.d/openvswitch
> -/etc/sysconfig/network-scripts/ifup-ovs
> -/etc/sysconfig/network-scripts/ifdown-ovs
> -/usr/bin/ovs-appctl
> -/usr/bin/ovs-dpctl
> -/usr/bin/ovs-dpctl-top
> -/usr/bin/ovs-docker
> -/usr/bin/ovs-ofctl
> -/usr/bin/ovs-parse-backtrace
> -/usr/bin/ovs-pcap
> -/usr/bin/ovs-pki
> -/usr/bin/ovs-tcpdump
> -/usr/bin/ovs-tcpundump
> -/usr/bin/ovs-vlan-test
> -/usr/bin/ovs-vsctl
> -/usr/bin/ovsdb-client
> -/usr/bin/ovsdb-tool
> -/usr/bin/vtep-ctl
> -%{_libdir}/lib*.so.*
> -/usr/sbin/ovs-bugtool
> -/usr/sbin/ovs-vswitchd
> -/usr/sbin/ovsdb-server
> -/usr/share/man/man1/ovs-pcap.1.gz
> -/usr/share/man/man1/ovs-tcpundump.1.gz
> -/usr/share/man/man1/ovsdb-client.1.gz
> -/usr/share/man/man1/ovsdb-server.1.gz
> -/usr/share/man/man1/ovsdb-tool.1.gz
> -/usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
> -/usr/share/man/man5/vtep.5.gz
> -/usr/share/man/man7/ovs-fields.7.gz
> -/usr/share/man/man8/ovs-appctl.8.gz
> -/usr/share/man/man8/ovs-bugtool.8.gz
> -/usr/share/man/man8/ovs-ctl.8.gz
> -/usr/share/man/man8/ovs-dpctl.8.gz
> -/usr/share/man/man8/ovs-dpctl-top.8.gz
> -/usr/share/man/man8/ovs-ofctl.8.gz
> -/usr/share/man/man8/ovs-parse-backtrace.8.gz
> -/usr/share/man/man8/ovs-pki.8.gz
> -/usr/share/man/man8/ovs-tcpdump.8.gz
> -/usr/share/man/man8/ovs-vlan-test.8.gz
> -/usr/share/man/man8/ovs-vsctl.8.gz
> -/usr/share/man/man8/ovs-vswitchd.8.gz
> -/usr/share/man/man8/vtep-ctl.8.gz
> -/usr/share/openvswitch/bugtool-plugins/
> -/usr/share/openvswitch/python/
> -/usr/share/openvswitch/scripts/ovs-bugtool-*
> -/usr/share/openvswitch/scripts/ovs-check-dead-ifs
> -/usr/share/openvswitch/scripts/ovs-ctl
> -/usr/share/openvswitch/scripts/ovs-lib
> -/usr/share/openvswitch/scripts/ovs-save
> -/usr/share/openvswitch/scripts/ovs-vtep
> -/usr/share/openvswitch/scripts/sysconfig.template
> -/usr/share/openvswitch/vswitch.ovsschema
> -/usr/share/openvswitch/vtep.ovsschema
> -%doc COPYING NOTICE README.rst NEWS rhel/README.RHEL.rst
> -/var/lib/openvswitch
> -/var/log/openvswitch
> -
> -%files devel
> -%{_libdir}/lib*.so
> -%{_libdir}/lib*.a
> -%{_libdir}/pkgconfig
> -%{_includedir}/openvswitch/*
> -
> -%files selinux-policy
> -%defattr(-,root,root)
> -%{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp
> --
> 2.14.3
>
> _______________________________________________
> dev mailing list
> dev at openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
--
Russell Bryant
More information about the dev
mailing list