[ovs-dev] [PATCH v10 00/14] Support multi-segment mbufs

Ilya Maximets i.maximets at samsung.com
Mon Oct 8 17:04:10 UTC 2018


Current patch-set breaks a lot of STP unit tests:

## ------------------------------- ##
## openvswitch 2.10.90 test suite. ##
## ------------------------------- ##

ofproto-dpif

1149: ofproto-dpif - MPLS handling                    FAILED (ofproto-dpif.at:2068)
1164: ofproto-dpif - VLAN+MPLS handling               FAILED (ofproto-dpif.at:3921)

Spanning Tree Protocol unit tests

2534: STP example from IEEE 802.1D-1998               FAILED (stp.at:18)
2535: STP example from IEEE 802.1D-2004 figures 17.4 and 17.5 FAILED (stp.at:61)
2536: STP example from IEEE 802.1D-2004 figure 17.6   FAILED (stp.at:87)
2537: STP example from IEEE 802.1D-2004 figure 17.7   FAILED (stp.at:116)
2538: STP.io.1.1: Link Failure                        FAILED (stp.at:155)
2539: STP.io.1.2: Repeated Network                    FAILED (stp.at:181)
2540: STP.io.1.4: Network Initialization              FAILED (stp.at:205)
2541: STP.io.1.5: Topology Change                     FAILED (stp.at:258)
2545: STP.op.3.3: Root Bridge Selection: Bridge ID Values FAILED (stp.at:337)
2546: STP.op.3.3: Root Bridge Selection: Bridge ID Values FAILED (stp.at:360)

## ------------- ##
## Test results. ##
## ------------- ##

ERROR: All 12 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##

Please send `tests/testsuite.log' and all information you think might help:

   To: <bugs at openvswitch.org>
   Subject: [openvswitch 2.10.90] testsuite: 1149 1164 2534 2535 2536 2537 2538 2539 2540 2541 2545 2546 failed

----------------------------------------------------------------------

Meanwhile, I still have a few concerns about this patch-set
in general:

1. Most of dp_packet APIs are now able to fail.
   But callers doesn't check results in most cases.

2. Many drivers has its own restrictions on the number of segments
   they able to handle in a single packet. For example, igb driver
   supports only up to 8 segments. I think, that we have to call
   tx preparation API and check the result before sending segmented
   packets. It's unclear, what to do with such packets. Will we
   have to have large sized mempool anyway for this case?

2.1 OVS will migrate to DPDK 18.11 as soon as it will be released,
    but there are few PMDs that doesn't support segmented packets
    at all (octeontx and axgbe, for example). Maybe it'll be better
    to work on this patch set on top of ovs/dpdk-latest branch and
    include all the required checks for DEV_TX_OFFLOAD_MULTI_SEGS
    flag in order to not block upgrade to 18.11 ?

One code specific thing (I did not review the whole code. This just
one thing that I noticed accidentally.):

3. dp_packet_equal should not fail in case of different memory
   layout, but equal data.


Best regards, Ilya Maximets.

On 28.09.2018 19:15, Tiago Lam wrote:
> Overview
> ========
> This patchset introduces support for multi-segment mbufs to OvS-DPDK.
> Multi-segment mbufs are typically used when the size of an mbuf is
> insufficient to contain the entirety of a packet's data. Instead, the
> data is split across numerous mbufs, each carrying a portion, or
> 'segment', of the packet data. Mbufs are chained via their 'next'
> attribute (an mbuf pointer).
> 
> The main motivation behind the support for multi-segment mbufs is to
> later introduce TSO (use case i. below) / GRO in OvS-DPDK, which is
> planned to be introduced after this series.
> 
> Use Cases
> =========
> i.  Handling oversized (guest-originated) frames, which are marked
>     for hardware accelration/offload (TSO, for example).
> 
>     Packets which originate from a non-DPDK source may be marked for
>     offload; as such, they may be larger than the permitted ingress
>     interface's MTU, and may be stored in an oversized dp-packet. In
>     order to transmit such packets over a DPDK port, their contents
>     must be copied to a DPDK mbuf (via dpdk_do_tx_copy). However, in
>     its current implementation, that function only copies data into
>     a single mbuf; if the space available in the mbuf is exhausted,
>     but not all packet data has been copied, then it is lost.
>     Similarly, when cloning a DPDK mbuf, it must be considered
>     whether that mbuf contains multiple segments. Both issues are
>     resolved within this patchset.
> 
> ii. Handling jumbo frames.
> 
>     While OvS already supports jumbo frames, it does so by increasing
>     mbuf size, such that the entirety of a jumbo frame may be handled
>     in a single mbuf. This is certainly the preferred, and most
>     performant approach (and remains the default).
> 
> Enabling multi-segment mbufs
> ============================
> Multi-segment and single-segment mbufs are mutually exclusive, and the
> user must decide on which approach to adopt on init. The introduction
> of a new OVSDB field, 'dpdk-multi-seg-mbufs', facilitates this.
> 
> This is a global boolean value, which determines how jumbo frames are
> represented across all DPDK ports. In the absence of a user-supplied
> value, 'dpdk-multi-seg-mbufs' defaults to false, i.e. multi-segment
> mbufs must be explicitly enabled / single-segment mbufs remain the
> default.
> 
> Setting the field is identical to setting existing DPDK-specific OVSDB
> fields:
> 
>     ovs-vsctl set Open_vSwitch . other_config:dpdk-init=true
>     ovs-vsctl set Open_vSwitch . other_config:dpdk-lcore-mask=0x10
>     ovs-vsctl set Open_vSwitch . other_config:dpdk-socket-mem=4096,0
> ==> ovs-vsctl set Open_vSwitch . other_config:dpdk-multi-seg-mbufs=true
> 
> Performance notes (based on v8, 1st non-RFC)
> =================
> In order to test for regressions in performance, tests were run on top
> of master 88125d6 and v8 of this patchset, both with the multi-segment
> mbufs option enabled and disabled.
> 
> VSperf was used to run the phy2phy_cont and pvp_cont tests with varying
> packet sizes of 64B, 1500B and 7000B, on a 10Gbps interface.
> 
> Test | Size | Master | Multi-seg disabled | Multi-seg enabled
> -------------------------------------------------------------
> p2p  |  64  | ~22.7  |      ~22.65        |       ~18.3
> p2p  | 1500 |  ~1.6  |        ~1.6        |        ~1.6
> p2p  | 7000 | ~0.36  |       ~0.36        |       ~0.36
> pvp  |  64  |  ~6.7  |        ~6.7        |        ~6.3
> pvp  | 1500 |  ~1.6  |        ~1.6        |        ~1.6
> pvp  | 7000 | ~0.36  |       ~0.36        |       ~0.36
> 
> Packet size is in bytes, while all packet rates are reported in mpps
> (aggregated).
> 
> No noticeable regression has been observed (certainly everything is
> within the ± 5% margin of existing performance), aside from the 64B
> packet size case when multi-segment mbuf is enabled. This is
> expected, however, because of how Tx vectoriszed functions are
> incompatible with multi-segment mbufs on some PMDs. The PMD under
> use during these tests was the i40e (on a Intel X710 NIC), which
> indeed doesn't support vectorized Tx functions with multi-segment
> mbufs.
> 
> ---
> v10: - Rebase on master 0d5450a ("ovsdb-client: Fix a bug that uses wrong
>        index");
>      - Address Ilya's comments:
>        - Fix dp_packet_reset() to not trim the packet;
>        - Remove unused netdev_dpdk_is_multi_segment_mbufs_enabled() function;
>        - Modify the dp_packet_l[2_5|3|4] layer functions to check that enough
>          data is present in the packet before returning. The callers were also
>          modified to act accordingly.
>      - Add comment to dp_packet_set_size() to clarify its usage and modify
>        dp_packet_pull() to comply with that;
>      - Modified slightly the "linearization" approach. Instead of making it an
>        implict operation there are now two functions, dp_packet_is_linear() and
>        dp_packet_linearize(), that enable the callers to explicity check if a
>        packet needs linearization and linearize it if needed;
>      - Briefly mention the Userspace Conntrack as one of the "limitations" when
>        using multi-segment mbufs.
> 
> v9: - Rebase on master e4e2009 ("tunnel, tests: Sort flow output in ERSPAN
>       v1/v2 metadata");
>     - Simplify patch 09/14. The functions introduced in packets.c were dropped
>       so the code in netdev-native-tnl.c remains largely the same. These can be
>       introduced at a later time, if needed (maybe when csum across segmented
>       data is introduced);
> 
> v8: - Rebase on master 1dd218a ("ovsdb-idl: Fix recently introduced Python 3
>       tests.");
>     - Address Ian's comment:
>       - Fix sparse warnings on patch 07/14 and 12/14 by allocating memory
>         dynamically.
>     - Address Ilya's comments:
>       - netdev_linux_tap_batch_send() and udp_extract_tnl_md() now linearize
>         the data before hand, beforing write()'ing or performing the checksums
>         in the data;
>       - Some other cases have been found and adapted; The new patch 09/14
>         introduced in the series is where the "linearization" logic is
>         introduced and, as a consequence, some users of the dp_packet API,
>         which were assuming the data is held contiguously in memory, are
>         changed to use the new APIs.
>     - Add support for multi-segment mbufs to dp_packet_equal() (patch 06/14);
>     - Fix a bug in patch 08/14 where the call to dp_packet_copy_mbuf_flags() in
>       dp_packet_clone_with_headroom() was setting incorrectly the nb_segs field
>       on the destination mbuf;
>     - Add unit-tests for dp_packet_equal() and (new) dp_packet_linear_data() to
>       patch 12/14;
>     - Add a comment to jumbo-frames.rst under topics/dpdk/ to warn how
>       multi-segments mbufs may affect performance when using large packets
>       across DPDK and non-DPDK ports.
> 
> v7: - Rebase on master 024810c ("Prepare for post-2.10.0 (2.10.90).");
>     - Add Ben's proposed fix for automake's warning;
>     - Add a note to cover letter to explain this is preperatory work for TSO /
>       GRO.
> 
> v6: - Rebase on master d1b235d ("tests: Add test for ovn-nbctl's command parser
>       error paths.");
>     - Address Darrell's comments:
>       - The changes in dp_packet_resize__() were trying to alleviate the call
>         to OVS_NOT_REACHED() for DPDK packets, by trying to reuse the available
>         tailroom space when no more headroom space is available, and vice-versa.
>         However, this was breaking the API for the dp_packet_resize__()
>         function (only called in dp_packet_prealloc_tailroom() and
>         dp_packet_prealloc_headroom()), which doesn't seem to suit the purposes
>         for DPDK packets.
>         Instead, and because this is isolate funtionality, revert to the
>         previous state where dp_packet_resize__() is not supported for DPDK
>         packets. Hence, then patch 08/14 has been dropped.
>     - Additionally, fix the tests that were relying on the removed
>       functionality.
> 
> v5: - Rebase on master 030958a0cc ("conntrack: Fix conn_update_state_alg use
>       after free.");
>     - Address Eelco's comments:
>       - Remove dpdk_mp_sweep() call in netdev_dpdk_mempool_configure(), a
>         leftover from rebase. Only call should be in dpdk_mp_get();
>       - Remove NEWS line added by mistake during rebase (about adding
>         experimental vhost zero copy support).
>     - Address Ian's comments:
>       - Drop patch 01 from previous series entirely;
>       - Patch (now) 01/14 adds a new call to dpdk_buf_size() inside
>         dpdk_mp_create() to get the correct "mbuf_size" to be used;
>       - Patch (now) 11/14 modifies dpdk_mp_create() to check if multi-segment
>         mbufs is enabled, in which case it calculates the new "mbuf_size" to be
>         used;
>       - In free_dpdk_buf() and dpdk_buf_alloc(), don't lock and unlock
>         conditionally.
>     - Add "per-port-memory=true" to test "Multi-segment mbufs Tx" as the current
>       DPDK set up in system-dpdk-testsuite can't handle higher MTU sizes using
>       the shared mempool model (runs out of memory);
>     - Add new examples for when multi-segment mbufs are enabled in
>       topics/dpdk/memory.rst, and a reference to topics/dpdk/jumbo-frames.rst
>       (now patch 11/14).
> 
> v4: - Rebase on master b22fb00 ("ovn-nbctl: Clarify error messages in qos-add
>       command."):
>       - A new patch (now 01/15) has been introduced to differentiate between
>         MTU and mbuf size when creating the mempool. This is because as part of
>         the new support for both per port and shared mempools, mempools were
>         being reused based on the mbuf size, and for multi-segment mbufs the
>         mbuf size can end up being the same for all mbufs;
>       - A couple of other patches (now 02/15 and 12/15) have been modified as
>         part of the rebase, but only to adapt to the code changes to "Support
>         both shared and per port mempools.", no functionality should have been
>         changed.
> 
> v3:
>     - Address Eelco's comment:
>         - Fix the ovs_assert() introduced in v2 in __packet_set_data(), which
>           wasn't correctly asserting that the passed 'v' was smaller than the
>           first mbuf's buf_len.
> 
> v2:
>     - Rebase on master e7cd8cf ("db-ctl-base: Don't die in cmd_destroy() on
>       error.");
>     - Address Eelco's comments:
>         - In free_dpdk_buf(), use mbuf's struct address in dp_packet instead of
>           casting;
>         - Remove unneeded variable in dp_packet_set_size(), pointing to the
>           first mbuf in the chain;
>         - Assert in dp_packet_set_size() to enforce that "pkt_len == v" is
>           always true for DPBUF_DPDK packets;
>         - Assert in __packet_set_data() to enforce that data_off never goes
>           beyond the first mbuf in the chain.
> 
> v1:
>     - v8 should have been sent as v1 really, as that's usually the approach
>       followed in OvS. That clearly didn't happen, so restarting the series
>       now. This also helps making it clear it is no longer an RFC series;
>     - Rebase on master e461481 ("ofp-meter: Fix ofp_print_meter_flags()
>       output.");
>     - Address Eelco's comments:
>         - Change dp_packet_size() so that for `DPBUF_DPDK` packets their
>           `pkt_len` and `data_len` can't be set to values bigger than the
>           available space. Also fix assigment to `data_len` which was
>           incorrectly being set to just`pkt_len`;
>         - Improve `nonpmd_mp_mutex` comment with a better explanation as to
>           why the mutex is needed;
>         - Fix dp_packet_clear() to not call rte_pktmbuf_reset() for non
>           `DPBUF_DPDK` packets;
>         - Dropped `if` clause in dp_packet_l4_size(), keep just the `else`;
>         - Change dp_packet_clone_with_headroom() to use rte_pktmbuf_read() for
>           copying `DPBUF_DPDK` packets' data. Also, change it to return
>           appropriate and meaningful errors, instead of just "0" or "1";
>         - Change dpdk_prep_tx_buf() name's to dpdk_clone_dp_packet_to_mbuf(),
>           and reuse dp_packet_mbuf_write() instead of manual copy;
>         - Add note vswitchd/vswitch.xml to make it clear the enabling of
>           dpdk-multi-seg-mbufs requires a restart;
>     - Change dpdk_mp_create() to increase # mbufs used under the multi-segment
>       mbufs approach;
>     - Increase test coverage by adding "end-to-end" tests that verify that
>       "dpdk-multi-seg-mbufs" is disabled by default and that a packet is
>       successfully sent out;
>     - Some helper funcs such as dp_packet_tail() and dp_packet_end() were moved
>       back to be common between `DPBUF_DPDK` and non `DPBUF_DPDK` packets, to
>       minimise changes;
>     - Add some extra notes to "Performance notes" in jumbo-frames.rst doc,
>       after further testing;
>     - Structure changes:
>       - Drop patch 07/13 which is now unneeded;
>       - Two more patches added for extra test coverage. This is what accounts
>         for the increase in size (+1 patch) in the series.
> 
> v8 (non-RFC): 
>     - Rebase on master 88125d6 ("rhel: remove ovs-sim man page from
>       temporary directory (also for RHEL)");
>     - Address Ciara's and Ilya's comments:
>         - Drop the dp_packet_mbuf_tail() function and use only the
>           already existing dp_packet_tail();
>         - Fix bug in dpdk_do_tx_copy() where the error return from
>           dpdk_prep_tx_buf() was being wrongly checked;
>         - Use dpdk_buf_alloc() and free_dpdk_buf() instead of
>           rte_pktmbuf_alloc() and rte_pktmbuf_free();
>         - Fix some other code style and duplication issues pointed out.
>     - Refactored dp_packet_shift(), dp_packet_resize__() and
>       dp_packet_put*() functions to work within the bounds of existing
>       mbufs only;
>     - Fix dp_packet_clear() which wasn't correctly clearing / freeing
>       other mbufs in the chain for chains with more than a single mbuf;
>     - dp_packet layer functions (such as dp_packet_l3()) now check if
>       the header is within the first mbuf, when using mbufs;
>     - Move patch 08/13 to before patch 04/13, since dp_packet_set_size()
>       was refactored to use free_dpdk_buf();
>     - Fix wrong rte_memcpy() when performing dp_packet_clone() which was
>       leading to memory corruption; 
>     - Modified the added tests to account for some of the above changes;
>     - Run performance tests, compiling results and adding them to the
>       cover letter;
>     - Add a multi-seg mbufs explanation to the jumbo-frames.rst doc,
>       together with a "Performance notes" sub-section reflecting the
>       findings mentioned above in the cover letter.
> 
> v7:  - Rebase on master 5e720da ("erspan: fix invalid erspan version.");
>      - Address Ilya comments;
>         - Fix non-DPDK build;
>         - Serialise the access of non pmds to allocation and free of mbufs by
>           using a newly introduced mutex.
>      - Add a new set of tests that integrates with the recently added DPDK
>        testsuite. These focus on allocating dp_packets, with a single or
>        multiple mbufs, from an instantiated mempool and performing several
>        operations on those, verifying if the data at the end matches what's
>        expected;
>      - Fix bugs found by the new tests:
>         - dp_packet_shift() wasn't taking into account shift lefts;
>         - dp_packet_resize__() was misusing and miscalculating the tailrooms
>           and headrooms, ending up calculating the wrong number of segments
>           that needed allocation;
>         - An mbuf's end was being miscalculated both in dp_packet_tail,
>           dp_packet_mbuf_tail() and dp_packet_end();
>         - dp_packet_set_size() was not updating the number of chained segments
>           'nb_segs';
>      - Add support for multi-seg mbufs in dp_packet_clear().
> 
> v6:  - Rebase on master 7c0cb29 ("conntrack-tcp: Handle tcp session
>        reuse.");
>      - Further improve dp_packet_put_uninit() and dp_packet_shift() to
>        support multi-seg mbufs;
>      - Add support for multi-seg mbufs in dp_packet_l4_size() and
>        improve other helper funcs, such as dp_packet_tail() and dp_
>        packet_tailroom().
>      - Add support for multi-seg mbufs in dp_packet_put(), dp_packet_
>        put_zeros(), as well as dp_packet_resize__() - allocating new
>        mbufs and linking them together;
>      Restructured patchset:
>      - Squash patch 5 into patch 6, since they were both related to
>        copying data while handling multi-seg mbufs;
>      - Split patch 4 into two separate patches - one that introduces the
>        changes in helper functions to deal with multi-seg mbufs and
>        two others for the shift() and put_uninit() functionality;
>      - Move patch 4 to before patch 3, so that ihelper functions come
>        before functionality improvement that rely on those helpers.
> 
> v5: - Rebased on master e5e22dc ("datapath-windows: Prevent ct-counters
>       from getting redundantly incremented");
>     - Sugesh's comments have been addressed:
>       - Changed dp_packet_set_data() and dp_packet_set_size() logic to
>         make them independent of each other;
>       - Dropped patch 3 now that dp_packet_set_data() and dp_packet_set_
>         size() are independent;
>       - dp_packet_clone_with_headroom() now has split functions for
>         handling DPDK sourced packets and non-DPDK packets;
>     - Modified various functions in dp-packet.h to account for multi-seg
>       mbufs - dp_packet_put_uninit(), dp_packet_tail(), dp_packet_tail()
>       and dp_packet_at();
>     - Added support for shifting packet data in multi-seg mbufs, using
>       dp_packet_shift();
>     - Fixed some minor inconsistencies.
> 
>     Note that some of the changes in v5 have been contributed by Mark
>     Kavanagh as well.
> 
> v4: - restructure patchset
>     - account for 128B ARM cacheline when sizing mbufs
> 
> Mark Kavanagh (4):
>   netdev-dpdk: fix mbuf sizing
>   dp-packet: Init specific mbuf fields.
>   netdev-dpdk: copy large packet to multi-seg. mbufs
>   netdev-dpdk: support multi-segment jumbo frames
> 
> Michael Qiu (1):
>   dp-packet: copy data from multi-seg. DPDK mbuf
> 
> Tiago Lam (9):
>   dp-packet: Fix allocated size on DPDK init.
>   netdev-dpdk: Serialise non-pmds mbufs' alloc/free.
>   dp-packet: Fix data_len handling multi-seg mbufs.
>   dp-packet: Handle multi-seg mbufs in helper funcs.
>   dp-packet: Handle multi-seg mubfs in shift() func.
>   dp-packet: Add support for data "linearization".
>   dpdk-tests: Add unit-tests for multi-seg mbufs.
>   dpdk-tests: Accept other configs in OVS_DPDK_START
>   dpdk-tests: End-to-end tests for multi-seg mbufs.
> 
>  Documentation/topics/dpdk/jumbo-frames.rst |  73 ++++
>  Documentation/topics/dpdk/memory.rst       |  36 ++
>  NEWS                                       |   1 +
>  lib/bfd.c                                  |   3 +-
>  lib/cfm.c                                  |   5 +-
>  lib/conntrack-icmp.c                       |   4 +-
>  lib/conntrack-private.h                    |   4 +-
>  lib/conntrack-tcp.c                        |   6 +-
>  lib/conntrack.c                            | 109 +++--
>  lib/dp-packet.c                            | 192 ++++++++-
>  lib/dp-packet.h                            | 407 +++++++++++++++----
>  lib/dpdk.c                                 |   8 +
>  lib/dpif-netdev.c                          |   5 +
>  lib/dpif-netlink.c                         |   5 +
>  lib/dpif.c                                 |   9 +
>  lib/flow.c                                 |  29 +-
>  lib/lacp.c                                 |   3 +-
>  lib/mcast-snooping.c                       |   8 +-
>  lib/netdev-bsd.c                           |   5 +
>  lib/netdev-dpdk.c                          | 243 +++++++++--
>  lib/netdev-dpdk.h                          |   1 +
>  lib/netdev-dummy.c                         |  13 +-
>  lib/netdev-linux.c                         |  13 +-
>  lib/netdev-native-tnl.c                    |  39 +-
>  lib/odp-execute.c                          |  28 +-
>  lib/ofp-print.c                            |  10 +-
>  lib/ovs-lldp.c                             |   3 +-
>  lib/packets.c                              |  81 ++--
>  lib/pcap-file.c                            |   2 +-
>  ofproto/ofproto-dpif-upcall.c              |  20 +-
>  ofproto/ofproto-dpif-xlate.c               |  42 +-
>  ovn/controller/pinctrl.c                   |  29 +-
>  tests/automake.mk                          |  10 +-
>  tests/dpdk-packet-mbufs.at                 |   7 +
>  tests/system-dpdk-macros.at                |   6 +-
>  tests/system-dpdk-testsuite.at             |   1 +
>  tests/system-dpdk.at                       |  65 +++
>  tests/test-conntrack.c                     |   2 +-
>  tests/test-dpdk-mbufs.c                    | 620 +++++++++++++++++++++++++++++
>  tests/test-rstp.c                          |   8 +-
>  tests/test-stp.c                           |   8 +-
>  vswitchd/vswitch.xml                       |  22 +
>  42 files changed, 1892 insertions(+), 293 deletions(-)
>  create mode 100644 tests/dpdk-packet-mbufs.at
>  create mode 100644 tests/test-dpdk-mbufs.c
> 


More information about the dev mailing list