[ovs-dev] [PATCH ovn 2/4] Build OVN using external OVS directory
nusiddiq at redhat.com
nusiddiq at redhat.com
Tue Aug 13 16:27:45 UTC 2019
From: Numan Siddique <nusiddiq at redhat.com>
With this patch we have to configure OVN to refer to external OVS source/build
directory instead of the ovs subtree.
The new configuration options added are:
* --with-ovs-source=/path/to/ovs/source/dir
* --with-ovs-build=/path/to/ovs/build/dir
Before configuring OVN, user should configure and compile OVS. If the user has
configured OVS on a different directory than the source dir, then 'with-ovs-build'
should be specified.
If ovs-build dir is not defined, then ovs-source is used.
An upcoming patch will delete the ovs subtree.
Example usage:
$ # Clone OVS repo
$cd /home/foo/ovs
$./boot.sh
$mkdir _gcc
$cd _gcc && ../configure && cd ..
$make -C _gcc
$ # Clone OVN repo
$cd /home/foo/ovn
$./boot.sh
$./configure --with-ovs-source=/home/foo/ovs/ --with-ovs-build=/home/foo/ovs/_gcc
$make
The test files ovn-controller-vtep.at, ovn-nbctl.at and ovn-sbctl.at needed to be modified
because of this commit [1] in the openvswitch repo.
This patch also updates the tutorial/ovs-sandbox to use OVS binaries from the OVS build
folder.
[1] - https://github.com/openvswitch/ovs/commit/29004db273985088cdb60097bdfd4a6bc6a966d1
Acked-by: Lucas Alvares Gomes <lucasagomes at gmail.com>
Signed-off-by: Numan Siddique <nusiddiq at redhat.com>
Tested-by: Lorenzo Bianconi <lorenzo.bianconi at redhat.com>
---
.travis/linux-build.sh | 17 +-
.travis/osx-build.sh | 13 +-
Documentation/intro/install/general.rst | 31 ++-
Makefile.am | 24 +-
acinclude.m4 | 35 +++
configure.ac | 29 +--
controller-vtep/automake.mk | 2 +-
include/ovn/version.h.in | 28 +++
lib/ovsdb_automake.mk | 7 +-
tests/automake.mk | 6 +-
tests/ofproto-macros.at | 4 +-
tests/ovn-controller-vtep.at | 12 +-
tests/ovn-nbctl.at | 6 +-
tests/ovn-sbctl.at | 20 +-
tests/ovn.at | 158 ++++++------
tests/ovsdb-macros.at | 2 +-
tutorial/automake.mk | 2 +-
tutorial/ovs-sandbox | 308 ++++++++++++------------
18 files changed, 403 insertions(+), 301 deletions(-)
create mode 100644 include/ovn/version.h.in
diff --git a/.travis/linux-build.sh b/.travis/linux-build.sh
index a20474345..37a6844ab 100755
--- a/.travis/linux-build.sh
+++ b/.travis/linux-build.sh
@@ -10,7 +10,18 @@ TARGET="x86_64-native-linuxapp-gcc"
function configure_ovs()
{
+ git clone https://github.com/openvswitch/ovs.git ovs_src
+ pushd ovs_src
./boot.sh && ./configure $* || { cat config.log; exit 1; }
+ make -j4
+ popd
+}
+
+function configure_ovn()
+{
+ configure_ovs $*
+ ./boot.sh && ./configure --with-ovs-source=$PWD/ovs_src $* || \
+ { cat config.log; exit 1; }
}
OPTS="$EXTRA_OPTS $*"
@@ -28,16 +39,16 @@ fi
if [ "$TESTSUITE" ]; then
# 'distcheck' will reconfigure with required options.
# Now we only need to prepare the Makefile without sparse-wrapped CC.
- configure_ovs
+ configure_ovn
- export DISTCHECK_CONFIGURE_FLAGS="$OPTS"
+ export DISTCHECK_CONFIGURE_FLAGS="$OPTS --with-ovs-source=$PWD/ovs_src"
if ! make distcheck -j4 TESTSUITEFLAGS="-j4 -k ovn" RECHECK=yes; then
# testsuite.log is necessary for debugging.
cat */_build/tests/testsuite.log
exit 1
fi
else
- configure_ovs $OPTS
+ configure_ovn $OPTS
make selinux-policy
make -j4
diff --git a/.travis/osx-build.sh b/.travis/osx-build.sh
index f11d7b9af..1d6ac54af 100755
--- a/.travis/osx-build.sh
+++ b/.travis/osx-build.sh
@@ -7,10 +7,20 @@ EXTRA_OPTS=""
function configure_ovs()
{
+ git clone https://github.com/openvswitch/ovs.git ovs_src
+ pushd ovs_src
./boot.sh && ./configure $*
+ make -j4
+ popd
}
-configure_ovs $EXTRA_OPTS $*
+function configure_ovn()
+{
+ configure_ovs $*
+ ./boot.sh && ./configure $* --with-ovs-source=$PWD/ovs_src
+}
+
+configure_ovn $EXTRA_OPTS $*
if [ "$CC" = "clang" ]; then
make CFLAGS="$CFLAGS -Wno-error=unused-command-line-argument"
@@ -18,6 +28,7 @@ else
make CFLAGS="$CFLAGS $BUILD_ENV"
fi
if [ "$TESTSUITE" ] && [ "$CC" != "clang" ]; then
+ export DISTCHECK_CONFIGURE_FLAGS="$EXTRA_OPTS --with-ovs-source=$PWD/ovs_src"
if ! make distcheck RECHECK=yes; then
# testsuite.log is necessary for debugging.
cat */_build/tests/testsuite.log
diff --git a/Documentation/intro/install/general.rst b/Documentation/intro/install/general.rst
index 4cc9c4c3a..c19b717b2 100644
--- a/Documentation/intro/install/general.rst
+++ b/Documentation/intro/install/general.rst
@@ -42,9 +42,8 @@ out. This is the right branch for general development.
As of now there are no official OVN releases.
-Although building OVN, also builds OVS, it is recommended to clone
-and build OVS from its own repo. Please see the Open vSwitch
-documentation to build and install OVS.
+Before building OVN you should configure and build OVS.
+Please see the Open vSwitch documentation to build and install OVS.
.. _general-build-reqs:
@@ -143,18 +142,25 @@ the "configure" script::
$ ./boot.sh
+Before configuring OVN, clone, configure and build Open vSwitch.
+
.. _general-configuring:
Configuring
-----------
-Configure the package by running the configure script. You can usually
-invoke configure without any arguments. For example::
+Configure the package by running the configure script. You need to
+invoke configure with atleast the argument --with-ovs-source.
+For example::
+
+ $ ./configure --with-ovs-source=/path/to/ovs/source
- $ ./configure
+If you have built Open vSwitch in a separate directory, then you
+need to provide that path in the option - --with-ovs-build.
By default all files are installed under ``/usr/local``. OVN expects to find
its database in ``/usr/local/etc/ovn`` by default.
+
If you want to install all files into, e.g., ``/usr`` and ``/var`` instead of
``/usr/local`` and ``/usr/local/var`` and expect to use ``/etc/ovn`` as
the default database directory, add options as shown here::
@@ -272,6 +278,19 @@ you wish to link with jemalloc add it to LIBS::
$ ./configure LIBS=-ljemalloc
+Example usage::
+ $ # Clone OVS repo
+ $cd /home/foo/ovs
+ $./boot.sh
+ $mkdir _gcc
+ $cd _gcc && ../configure && cd ..
+ $make -C _gcc
+
+ $ # Clone OVN repo
+ $cd /home/foo/ovn
+ $./boot.sh
+ $./configure --with-ovs-source=/home/foo/ovs/ --with-ovs-build=/home/foo/ovs/_gcc
+
.. _general-building:
Building
diff --git a/Makefile.am b/Makefile.am
index 6447e348b..d2dae3948 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -7,7 +7,7 @@
AUTOMAKE_OPTIONS = foreign subdir-objects
ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = ovs
+#SUBDIRS = ovs
OVS_SRCDIR=@ovs_srcdir@
OVS_BUILDDIR=@ovs_builddir@
@@ -22,9 +22,9 @@ AM_LDFLAGS += $(OVS_LDFLAGS)
AM_CPPFLAGS += -I $(top_srcdir)/include
if WIN32
-AM_CPPFLAGS += -I $(top_srcdir)/ovs/include
-AM_CPPFLAGS += -I $(top_srcdir)/ovs/lib
-AM_CPPFLAGS += -I $(top_srcdir)/ovs
+AM_CPPFLAGS += -I $(OVS_SRCDIR)/include
+AM_CPPFLAGS += -I $(OVS_SRCDIR)/lib
+AM_CPPFLAGS += -I $(OVS_SRCDIR)
AM_CPPFLAGS += -I $(top_srcdir)/lib
AM_CPPFLAGS += $(PTHREAD_INCLUDES)
AM_CPPFLAGS += $(MSVC_CFLAGS)
@@ -33,6 +33,10 @@ AM_LDFLAGS += $(MSVC64_LDFLAGS)
PLATFORM = $(MSVC_PLATFORM)
endif
+AM_CPPFLAGS += -I $(top_srcdir)/include
+AM_CPPFLAGS += -I $(top_srcdir)/ovn
+AM_CPPFLAGS += -I $(top_builddir)/include
+
AM_CPPFLAGS += -I $(OVS_SRCDIR)/include
AM_CPPFLAGS += -I $(OVS_BUILDDIR)/include
AM_CPPFLAGS += -I $(OVS_SRCDIR)/lib
@@ -113,8 +117,7 @@ EXTRA_DIST = \
ovn-nb.ovsschema \
ovn-nb.xml \
ovn-sb.ovsschema \
- ovn-sb.xml \
- ovs/
+ ovn-sb.xml
bin_PROGRAMS =
sbin_PROGRAMS =
bin_SCRIPTS =
@@ -222,13 +225,6 @@ CLEAN_LOCAL += clean-pycov
ALL_LOCAL += dist-hook-git
dist-hook-git: distfiles
@if test -e $(srcdir)/.git && (git --version) >/dev/null 2>&1; then \
- (cd ovs && $(MAKE) distfiles); \
- (cat distfiles; sed 's|^|ovs/|' ovs/distfiles) | \
- LC_ALL=C sort -u > ovs-distfiles; \
- (cd ovs/datapath && $(MAKE) distfiles); \
- (cat distfiles; sed 's|^|ovs/datapath/|' ovs/datapath/distfiles) | \
- LC_ALL=C sort -u > datapath-distfiles; \
- LC_ALL=C sort -u ovs-distfiles datapath-distfiles > all-distfiles; \
(cd $(srcdir) && git ls-files) | grep -v '\.gitignore$$' | \
grep -v '\.gitattributes$$' | \
LC_ALL=C sort -u > all-gitfiles; \
@@ -244,7 +240,7 @@ dist-hook-git: distfiles
exit 1; \
fi \
fi
-CLEANFILES += ovs-distfiles datapath-distfiles all-distfiles all-gitfiles missing-distfiles
+CLEANFILES += all-distfiles all-gitfiles missing-distfiles
# The following is based on commands for the Automake "distdir" target.
distfiles: Makefile
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
diff --git a/acinclude.m4 b/acinclude.m4
index 7604c92b8..b0211ed35 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -1206,3 +1206,38 @@ AC_DEFUN([OVS_CHECK_LINUX_HOST],
[ovs_cv_linux=true],
[ovs_cv_linux=false])])
AM_CONDITIONAL([LINUX], [$ovs_cv_linux])])
+
+dnl OVN_CHECK_OVS
+dnl
+dnl Check for OVS sources
+AC_DEFUN([OVN_CHECK_OVS], [
+ AC_ARG_WITH([ovs-source],
+ [AC_HELP_STRING([--ovs-source=/path/to/ovs/src/dir],
+ [Specify the OVS src directory])])
+ AC_ARG_WITH([ovs-build],
+ [AC_HELP_STRING([--ovs-build=/path/to/ovs/build/dir],
+ [Specify the OVS build directory])])
+
+ AC_MSG_CHECKING([for OVS source directory])
+ if test X"$with_ovs_source" != X; then
+ OVSDIR=$with_ovs_source
+ else
+ AC_ERROR([OVS source dir path needs to be specified])
+ fi
+
+ OVSDIR=`eval echo "$OVSDIR"`
+ AC_MSG_RESULT([$OVSDIR])
+ AC_SUBST(OVSDIR)
+
+ AC_MSG_CHECKING([for OVS build directory])
+ if test X"$with_ovs_build" != X; then
+ OVSBUILDDIR=$with_ovs_build
+ else
+ # If separate build dir is not specified, use src dir.
+ OVSBUILDDIR=$OVSDIR
+ fi
+
+ OVSBUILDDIR=`eval echo "$OVSBUILDDIR"`
+ AC_MSG_RESULT([$OVSBUILDDIR])
+ AC_SUBST(OVSBUILDDIR)
+])
diff --git a/configure.ac b/configure.ac
index c74b17a1d..4ba092f51 100644
--- a/configure.ac
+++ b/configure.ac
@@ -20,7 +20,7 @@ AC_CONFIG_HEADERS([config.h])
AC_CONFIG_TESTDIR([tests])
AM_INIT_AUTOMAKE([tar-pax])
-AC_CONFIG_SUBDIRS([ovs])
+#AC_CONFIG_SUBDIRS([ovs])
AC_PROG_CC_C99
AM_PROG_CC_C_O
@@ -64,23 +64,17 @@ m4_pattern_forbid([LT_INIT]) dnl Make autoconf fail if libtool is missing.
# the new version. This is the case when symbols have been modified or
# deleted. Bump current, set revision and age to 0.
-m4_define([libopenvswitch_lt_current], [0])
-m4_define([libopenvswitch_lt_revision], [0])
-m4_define([libopenvswitch_lt_age], [0])
+m4_define([libovn_lt_current], [0])
+m4_define([libovn_lt_revision], [0])
+m4_define([libovn_lt_age], [0])
-LT_CURRENT=libopenvswitch_lt_current
+LT_CURRENT=libovn_lt_current
AC_SUBST([LT_CURRENT])
-LT_REVISION=libopenvswitch_lt_revision
+LT_REVISION=libovn_lt_revision
AC_SUBST([LT_REVISION])
-LT_AGE=libopenvswitch_lt_age
+LT_AGE=libovn_lt_age
AC_SUBST([LT_AGE])
-AC_SUBST([ovs_srcdir], ['${top_srcdir}/ovs'])
-AC_SUBST([ovs_builddir], ['${top_builddir}/ovs'])
-AC_SUBST([ovs_libdir], ['${top_builddir}/ovs/lib'])
-AC_SUBST([ovsdb_libdir], ['${top_builddir}/ovs/ovsdb'])
-AC_SUBST([ovs_mandir], ['${top_srcdir}/ovs/'])
-
AC_SEARCH_LIBS([pow], [m])
AC_SEARCH_LIBS([clock_gettime], [rt])
AC_SEARCH_LIBS([timer_create], [rt])
@@ -188,12 +182,19 @@ OVS_CHECK_LINUX
OVS_CHECK_LINUX_TC
OVS_CHECK_DPDK
OVS_CHECK_PRAGMA_MESSAGE
+OVN_CHECK_OVS
AC_SUBST([OVS_CFLAGS])
AC_SUBST([OVS_LDFLAGS])
+AC_SUBST([ovs_srcdir], ['${OVSDIR}'])
+AC_SUBST([ovs_builddir], ['${OVSBUILDDIR}'])
+AC_SUBST([ovs_libdir], ['${OVSBUILDDIR}/lib'])
+AC_SUBST([ovsdb_libdir], ['${OVSBUILDDIR}/ovsdb'])
+AC_SUBST([ovs_mandir], ['${OVSDIR}'])
+
AC_CONFIG_FILES(Makefile)
AC_CONFIG_FILES(tests/atlocal)
-AC_CONFIG_FILES(ovs/include/openvswitch/version.h)
+AC_CONFIG_FILES(include/ovn/version.h)
dnl This makes sure that include/openflow gets created in the build directory.
AC_CONFIG_COMMANDS([include/openflow/openflow.h.stamp])
diff --git a/controller-vtep/automake.mk b/controller-vtep/automake.mk
index a6810969f..a5779eba6 100644
--- a/controller-vtep/automake.mk
+++ b/controller-vtep/automake.mk
@@ -8,7 +8,7 @@ controller_vtep_ovn_controller_vtep_SOURCES = \
controller-vtep/ovn-controller-vtep.h \
controller-vtep/vtep.c \
controller-vtep/vtep.h
-controller_vtep_ovn_controller_vtep_LDADD = lib/libovn.la $(OVS_LIBDIR)/libopenvswitch.la ovs/vtep/libvtep.la
+controller_vtep_ovn_controller_vtep_LDADD = lib/libovn.la $(OVS_LIBDIR)/libopenvswitch.la $(OVSBUILDDIR)/vtep/libvtep.la
man_MANS += controller-vtep/ovn-controller-vtep.8
EXTRA_DIST += controller-vtep/ovn-controller-vtep.8.xml
CLEANFILES += controller-vtep/ovn-controller-vtep.8
diff --git a/include/ovn/version.h.in b/include/ovn/version.h.in
new file mode 100644
index 000000000..e27415ba1
--- /dev/null
+++ b/include/ovn/version.h.in
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2014 Nicira, Inc.
+ * Copyright (c) 2014 Cisco Systems, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef OVN_VERSION_H
+#define OVN_VERSION_H 1
+
+#define OVN_PACKAGE_STRING "@PACKAGE_STRING@"
+#define OVN_PACKAGE_VERSION "@PACKAGE_VERSION@"
+
+#define OVN_LIB_VERSION @LT_CURRENT@
+#define OVN_LIB_REVISION @LT_REVISION@
+#define OVN_LIB_AGE @LT_AGE@
+
+#endif /* ovn/version.h */
diff --git a/lib/ovsdb_automake.mk b/lib/ovsdb_automake.mk
index f6fd5e8b3..32f22b672 100644
--- a/lib/ovsdb_automake.mk
+++ b/lib/ovsdb_automake.mk
@@ -1,10 +1,6 @@
# ovsdb-idlc
-noinst_SCRIPTS += ovs/ovsdb/ovsdb-idlc
-EXTRA_DIST += ovs/ovsdb/ovsdb-idlc.in
-MAN_ROOTS += ovs/ovsdb/ovsdb-idlc.1
-CLEANFILES += ovs/ovsdb/ovsdb-idlc
SUFFIXES += .ovsidl .ovsschema
-OVSDB_IDLC = $(run_python) $(srcdir)/ovs/ovsdb/ovsdb-idlc.in
+OVSDB_IDLC = $(run_python) ${OVSDIR}/ovsdb/ovsdb-idlc.in
.ovsidl.c:
$(AM_V_GEN)$(OVSDB_IDLC) c-idl-source $< > $@.tmp && mv $@.tmp $@
.ovsidl.h:
@@ -21,5 +17,4 @@ CLEANFILES += $(OVSIDL_BUILT)
# However, current versions of Automake seem to output all variable
# assignments before any targets, so it doesn't seem to be a problem,
# at least for now.
-$(OVSIDL_BUILT): ovs/ovsdb/ovsdb-idlc.in
diff --git a/tests/automake.mk b/tests/automake.mk
index 5411772a4..1fabb5350 100644
--- a/tests/automake.mk
+++ b/tests/automake.mk
@@ -51,10 +51,10 @@ SYSTEM_KMOD_TESTSUITE = $(srcdir)/tests/system-kmod-testsuite
SYSTEM_USERSPACE_TESTSUITE = $(srcdir)/tests/system-userspace-testsuite
DISTCLEANFILES += tests/atconfig tests/atlocal
-AUTOTEST_PATH = ovs/utilities:ovs/vswitchd:ovs/ovsdb:ovs/vtep:tests:$(PTHREAD_WIN32_DIR_DLL):$(SSL_DIR):controller-vtep:northd:utilities:controller
+AUTOTEST_PATH = $(ovs_builddir)/utilities:$(ovs_builddir)/vswitchd:$(ovs_builddir)/ovsdb:$(ovs_builddir)/vtep:tests:$(PTHREAD_WIN32_DIR_DLL):$(SSL_DIR):controller-vtep:northd:utilities:controller
check-local:
- set $(SHELL) '$(TESTSUITE)' -C tests AUTOTEST_PATH=$(AUTOTEST_PATH); \
+ set $(SHELL) '$(TESTSUITE)' -C tests AUTOTEST_PATH=$(AUTOTEST_PATH) ovs_srcdir=$(ovs_srcdir); \
"$$@" $(TESTSUITEFLAGS) || (test X'$(RECHECK)' = Xyes && "$$@" --recheck)
# Python Coverage support.
@@ -230,7 +230,7 @@ tests/testpki-req2.pem: tests/pki/stamp
tests/testpki-privkey2.pem: tests/pki/stamp
$(AM_V_GEN)cp tests/pki/test2-privkey.pem $@
-OVS_PKI = $(SHELL) $(srcdir)/ovs/utilities/ovs-pki.in --dir=tests/pki --log=tests/ovs-pki.log
+OVS_PKI = $(SHELL) $(ovs_srcdir)/utilities/ovs-pki.in --dir=tests/pki --log=tests/ovs-pki.log
tests/pki/stamp:
$(AM_V_at)rm -f tests/pki/stamp
$(AM_V_at)rm -rf tests/pki
diff --git a/tests/ofproto-macros.at b/tests/ofproto-macros.at
index 4d4683775..536da8dd7 100644
--- a/tests/ofproto-macros.at
+++ b/tests/ofproto-macros.at
@@ -91,7 +91,7 @@ sim_add () {
# Create database and start ovsdb-server.
: > "$d"/.conf.db.~lock~
- as $1 ovsdb-tool create "$d"/conf.db "$abs_top_srcdir"/ovs/vswitchd/vswitch.ovsschema || return 1
+ as $1 ovsdb-tool create "$d"/conf.db "$ovs_srcdir"/vswitchd/vswitch.ovsschema || return 1
as $1 start_daemon ovsdb-server --remote=punix:"$d"/db.sock || return 1
# Initialize database.
@@ -322,7 +322,7 @@ m4_define([TESTABLE_LOG], [-vPATTERN:ANY:'%c|%p|%m'])
m4_define([_OVS_VSWITCHD_START],
[dnl Create database.
touch .conf.db.~lock~
- AT_CHECK([ovsdb-tool create conf.db $abs_top_srcdir/ovs/vswitchd/vswitch.ovsschema])
+ AT_CHECK([ovsdb-tool create conf.db $ovs_srcdir/vswitchd/vswitch.ovsschema])
dnl Start ovsdb-server.
AT_CHECK([ovsdb-server --detach --no-chdir --pidfile --log-file --remote=punix:$OVS_RUNDIR/db.sock], [0], [], [stderr])
diff --git a/tests/ovn-controller-vtep.at b/tests/ovn-controller-vtep.at
index 187235138..e8c731fca 100644
--- a/tests/ovn-controller-vtep.at
+++ b/tests/ovn-controller-vtep.at
@@ -18,11 +18,11 @@ m4_define([OVN_CONTROLLER_VTEP_START],
AT_SKIP_IF([test $HAVE_PYTHON = no])
dnl Create databases (ovn-nb, ovn-sb, vtep).
- AT_CHECK([ovsdb-tool create vswitchd.db $abs_top_srcdir/ovs/vswitchd/vswitch.ovsschema])
+ AT_CHECK([ovsdb-tool create vswitchd.db $ovs_srcdir/vswitchd/vswitch.ovsschema])
for daemon in ovn-nb ovn-sb; do
AT_CHECK([ovsdb-tool create $daemon.db $abs_top_srcdir/${daemon}.ovsschema])
done
- AT_CHECK([ovsdb-tool create vtep.db $abs_top_srcdir/ovs/vtep/vtep.ovsschema])
+ AT_CHECK([ovsdb-tool create vtep.db $ovs_srcdir/vtep/vtep.ovsschema])
dnl Start ovsdb-server.
AT_CHECK([ovsdb-server --detach --no-chdir --pidfile --log-file --remote=punix:$OVS_RUNDIR/db.sock vswitchd.db vtep.db], [0], [], [stderr])
@@ -137,28 +137,28 @@ AT_CHECK([ovn-sbctl --columns=ip list Encap | cut -d ':' -f2 | tr -d ' '], [0],
AT_CHECK([vtep-ctl add-ls lswitch0 -- bind-ls br-vtep p0 100 lswitch0 -- bind-ls br-vtep p0 200 lswitch0 -- bind-ls br-vtep p1 300 lswitch0])
OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Chassis | grep -- lswitch0`"])
AT_CHECK([ovn-sbctl --columns=vtep_logical_switches list Chassis | cut -d ':' -f2 | tr -d ' ' ], [0], [dnl
-[["lswitch0"]]
+[[lswitch0]]
])
# adds another logical switch and new vlan_bindings.
AT_CHECK([vtep-ctl add-ls lswitch1 -- bind-ls br-vtep p0 300 lswitch1])
OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Chassis | grep -- lswitch1`"])
AT_CHECK([ovn-sbctl --columns=vtep_logical_switches list Chassis | cut -d ':' -f2 | tr -d ' '], [0], [dnl
-[["lswitch0","lswitch1"]]
+[[lswitch0,lswitch1]]
])
# unbinds one port from lswitch0, nothing should change.
AT_CHECK([vtep-ctl unbind-ls br-vtep p0 200])
OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=vlan_bindings list physical_port p0 | grep -- '200='`"])
AT_CHECK([ovn-sbctl --columns=vtep_logical_switches list Chassis | cut -d ':' -f2 | tr -d ' ' ], [0], [dnl
-[["lswitch0","lswitch1"]]
+[[lswitch0,lswitch1]]
])
# unbinds all ports from lswitch0.
AT_CHECK([vtep-ctl unbind-ls br-vtep p0 100 -- unbind-ls br-vtep p1 300])
OVS_WAIT_UNTIL([test -z "`ovn-sbctl list Chassis | grep -- br-vtep_lswitch0`"])
AT_CHECK([ovn-sbctl --columns=vtep_logical_switches list Chassis | cut -d ':' -f2 | tr -d ' ' ], [0], [dnl
-[["lswitch1"]]
+[[lswitch1]]
])
# unbinds all ports from lswitch1.
diff --git a/tests/ovn-nbctl.at b/tests/ovn-nbctl.at
index cf06966ed..a46174c72 100644
--- a/tests/ovn-nbctl.at
+++ b/tests/ovn-nbctl.at
@@ -1594,7 +1594,7 @@ OVN_NBCTL_TEST([ovn_nbctl_port_groups], [port groups], [
dnl Check that port group can be looked up by name
AT_CHECK([ovn-nbctl create Port_Group name=pg0], [0], [ignore])
AT_CHECK([ovn-nbctl get Port_Group pg0 name], [0], [dnl
-"pg0"
+pg0
])])
OVN_NBCTL_TEST([ovn_nbctl_extra_newlines], [extra newlines], [
@@ -1603,10 +1603,10 @@ dnl daemon mode. All we have to do is ensure that each time we list database
dnl information, there is not an extra newline at the beginning of the output.
AT_CHECK([ovn-nbctl ls-add sw1], [0], [ignore])
AT_CHECK([ovn-nbctl --columns=name list logical_switch sw1], [0], [dnl
-name : "sw1"
+name : sw1
])
AT_CHECK([ovn-nbctl --columns=name list logical_switch sw1], [0], [dnl
-name : "sw1"
+name : sw1
])])
OVN_NBCTL_TEST([ovn_nbctl_table_formatting], [table formatting], [
diff --git a/tests/ovn-sbctl.at b/tests/ovn-sbctl.at
index a679f40a8..c25d4d372 100644
--- a/tests/ovn-sbctl.at
+++ b/tests/ovn-sbctl.at
@@ -79,11 +79,11 @@ AT_CHECK([ovn-nbctl --wait=sb sync])
AT_CHECK([ovn-sbctl lsp-bind vif0 ch0])
AT_CHECK([ovn-sbctl show], [0], [dnl
-Chassis "ch0"
+Chassis ch0
Encap stt
ip: "1.2.3.5"
options: {csum="true"}
- Port_Binding "vif0"
+ Port_Binding vif0
])
# adds another 'vif1'
@@ -92,12 +92,12 @@ AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:03])
AT_CHECK([ovn-sbctl lsp-bind vif1 ch0])
AT_CHECK([ovn-sbctl show | sed 's/vif[[0-9]]/vif/'], [0], [dnl
-Chassis "ch0"
+Chassis ch0
Encap stt
ip: "1.2.3.5"
options: {csum="true"}
- Port_Binding "vif"
- Port_Binding "vif"
+ Port_Binding vif
+ Port_Binding vif
])
# deletes 'vif1'
@@ -105,16 +105,16 @@ AT_CHECK([ovn-nbctl lsp-del vif1])
AT_CHECK([ovn-nbctl --wait=sb sync])
AT_CHECK([ovn-sbctl show], [0], [dnl
-Chassis "ch0"
+Chassis ch0
Encap stt
ip: "1.2.3.5"
options: {csum="true"}
- Port_Binding "vif0"
+ Port_Binding vif0
])
uuid=$(ovn-sbctl --columns=_uuid list Chassis ch0 | cut -d ':' -f2 | tr -d ' ')
AT_CHECK_UNQUOTED([ovn-sbctl --columns=logical_port,mac,chassis list Port_Binding], [0], [dnl
-logical_port : "vif0"
+logical_port : vif0
mac : [["f0:ab:cd:ef:01:02"]]
chassis : ${uuid}
])
@@ -126,10 +126,10 @@ AT_CHECK([ovn-nbctl lsp-set-options vtep0 vtep_physical_switch=p0 vtep_logical_s
AT_CHECK([ovn-sbctl --timeout=10 wait-until Port_Binding vtep0 options!={}])
AT_CHECK([ovn-sbctl --columns=logical_port,mac,type,options list Port_Binding vtep0], [0], [dnl
-logical_port : "vtep0"
+logical_port : vtep0
mac : [[]]
type : vtep
-options : {vtep_logical_switch="l0", vtep_physical_switch="p0"}
+options : {vtep_logical_switch=l0, vtep_physical_switch=p0}
])
OVN_SBCTL_TEST_STOP
diff --git a/tests/ovn.at b/tests/ovn.at
index 71eb39079..a54a8ca59 100644
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -18,7 +18,7 @@ m4_divert_text([PREPARE_TESTS],
exp_text=$2
exp_n=`wc -l < "$exp_text"`
OVS_WAIT_UNTIL(
- [$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $rcv_pcap > $rcv_text
+ [$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $rcv_pcap > $rcv_text
rcv_n=`wc -l < "$rcv_text"`
echo "rcv_n=$rcv_n exp_n=$exp_n"
test $rcv_n -ge $exp_n])
@@ -4607,7 +4607,7 @@ test_dhcp 1 f00000000001 01 $ciaddr $offer_ip $request_ip 0 ff1000000001 $server
# NXT_RESUMEs should be 1.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
cat 1.expected | cut -c -48 > expout
AT_CHECK([cat 1.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4633,7 +4633,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 0 ff1000000001 $server
# NXT_RESUMEs should be 2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4657,7 +4657,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 0 ff1000000001 $server
# NXT_RESUMEs should be 3.
OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4720,7 +4720,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 1 $src_ip $dst_ip ff10
# NXT_RESUMEs should be 5.
OVS_WAIT_UNTIL([test 5 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4746,7 +4746,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 1 $src_ip $dst_ip ff10
# NXT_RESUMEs should be 6.
OVS_WAIT_UNTIL([test 6 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4772,7 +4772,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 1 $src_ip $dst_ip ff10
# NXT_RESUMEs should be 7.
OVS_WAIT_UNTIL([test 7 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -4798,7 +4798,7 @@ test_dhcp 2 f00000000002 03 $ciaddr $offer_ip $request_ip 1 $src_ip $dst_ip ff10
# NXT_RESUMEs should be 8.
OVS_WAIT_UNTIL([test 8 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -5005,7 +5005,7 @@ test_dhcpv6 1 $src_mac $src_lla 01 $offer_ip
# NXT_RESUMEs should be 1.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap | trim_zeros > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap | trim_zeros > 1.packets
# cat 1.expected | trim_zeros > expout
cat 1.expected | cut -c -120 > expout
AT_CHECK([cat 1.packets | cut -c -120], [0], [expout])
@@ -5035,11 +5035,11 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
# vif2-tx.pcap should not have received the DHCPv6 reply packet
rm 2.packets
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > 2.packets
AT_CHECK([cat 2.packets], [0], [])
# vif1-tx.pcap should have received the DHCPv6 (invalid) request packet
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap | trim_zeros > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap | trim_zeros > 1.packets
cat 1.expected > expout
AT_CHECK([cat 1.packets], [0], [expout])
@@ -5055,11 +5055,11 @@ test_dhcpv6 3 $src_mac $src_lla 01 0 4
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
# vif3-tx.pcap should not have received the DHCPv6 reply packet
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif3-tx.pcap | trim_zeros > 3.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif3-tx.pcap | trim_zeros > 3.packets
AT_CHECK([cat 3.packets], [0], [])
# vif4-tx.pcap should have received the DHCPv6 request packet
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif4-tx.pcap | trim_zeros > 4.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif4-tx.pcap | trim_zeros > 4.packets
cat 4.expected > expout
AT_CHECK([cat 4.packets], [0], [expout])
@@ -5073,7 +5073,7 @@ test_dhcpv6 5 $src_mac $src_lla 01 1 5
# NXT_RESUMEs should be 3.
OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif5-tx.pcap | trim_zeros > 5.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif5-tx.pcap | trim_zeros > 5.packets
# Skipping the UDP checksum
cat 5.expected | cut -c 1-120,125- > expout
AT_CHECK([cat 5.packets | cut -c 1-120,125- ], [0], [expout])
@@ -5089,7 +5089,7 @@ test_dhcpv6 5 $src_mac $src_lla 0b 1 5
# NXT_RESUMEs should be 4.
OVS_WAIT_UNTIL([test 4 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif5-tx.pcap |
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif5-tx.pcap |
trim_zeros > 5.packets
# Skipping the UDP checksum
cat 5.expected | cut -c 1-120,125- > expout
@@ -5533,7 +5533,7 @@ AT_CHECK([ovs-ofctl dump-flows br-int | \
])
# Expected to drop the packet.
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" pbr-hv/vif2-tx.pcap > vif2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" pbr-hv/vif2-tx.pcap > vif2.packets
rcvd_packet=`cat vif2.packets`
AT_FAIL_IF([rcvd_packet = ""])
@@ -5719,7 +5719,7 @@ AT_CHECK([ovs-ofctl dump-flows br-int | \
])
# Expected to drop the packet.
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" pbr-hv/vif2-tx.pcap > vif2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" pbr-hv/vif2-tx.pcap > vif2.packets
rcvd_packet=`cat vif2.packets`
AT_FAIL_IF([rcvd_packet = ""])
@@ -6506,7 +6506,7 @@ src_ip=`ip_to_hex 192 168 1 2`
dst_ip=`ip_to_hex 192 168 1 3`
expected=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > received1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > received1.packets
echo $expected > expout
AT_CHECK([cat received1.packets], [0], [expout])
@@ -6517,7 +6517,7 @@ src_ip=`ip_to_hex 192 168 1 2`
dst_ip=`ip_to_hex 192 168 2 2`
expected=${dst_mac}${src_mac}08004500001c000000003f110100${src_ip}${dst_ip}0035111100080000
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif3-tx.pcap > received2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif3-tx.pcap > received2.packets
echo $expected > expout
AT_CHECK([cat received2.packets], [0], [expout])
@@ -6720,7 +6720,7 @@ trim_zeros() {
# ARP packet should be received with Target IP Address set to 192.168.1.254 and
# not 8.8.8.8
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ls2lp2-tx.pcap | trim_zeros > packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ls2lp2-tx.pcap | trim_zeros > packets
expected="fffffffffffff0000000000208060001080006040001f00000000002c0a80101000000000000c0a801fe"
echo $expected > expout
AT_CHECK([cat packets], [0], [expout])
@@ -6771,7 +6771,7 @@ OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 50])
trim_zeros() {
sed 's/\(00\)\{1,\}$//'
}
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
echo $expected > expout
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80002000000000000c0a80002"
@@ -6836,7 +6836,7 @@ OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 50])
trim_zeros() {
sed 's/\(00\)\{1,\}$//'
}
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
echo $expected > expout
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80002000000000000c0a80002"
@@ -8245,7 +8245,7 @@ test_dns 1 f00000000001 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $d
# NXT_RESUMEs should be 1.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
cat 1.expected | cut -c -48 > expout
AT_CHECK([cat 1.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -8266,7 +8266,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $d
# NXT_RESUMEs should be 2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -8290,7 +8290,7 @@ test_dns 1 f00000000001 f00000000002 $src_ip $dst_ip $dns_reply $dns_req_data
# NXT_RESUMEs should be 3.
OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
AT_CHECK([cat 1.packets], [0], [])
reset_pcap_file hv1-vif1 hv1/vif1
@@ -8312,7 +8312,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data
# NXT_RESUMEs should be 3 only.
OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
AT_CHECK([cat 2.packets], [0], [])
reset_pcap_file hv1-vif1 hv1/vif1
@@ -8333,7 +8333,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $d
# NXT_RESUMEs should be 4.
OVS_WAIT_UNTIL([test 4 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -8355,7 +8355,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $d
# NXT_RESUMEs should be 5.
OVS_WAIT_UNTIL([test 5 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -48 > expout
AT_CHECK([cat 2.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -8377,7 +8377,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data
# NXT_RESUMEs should be 6.
OVS_WAIT_UNTIL([test 6 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
AT_CHECK([cat 2.packets], [0], [])
reset_pcap_file hv1-vif1 hv1/vif1
@@ -8395,7 +8395,7 @@ test_dns 2 f00000000002 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data
# NXT_RESUMEs should be 7.
OVS_WAIT_UNTIL([test 7 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
AT_CHECK([cat 2.packets], [0], [])
reset_pcap_file hv1-vif1 hv1/vif1
@@ -8415,7 +8415,7 @@ test_dns 1 f00000000001 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $d
# NXT_RESUMEs should be 8.
OVS_WAIT_UNTIL([test 8 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
cat 1.expected | cut -c -48 > expout
AT_CHECK([cat 1.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -8437,7 +8437,7 @@ test_dns6 1 f00000000001 f000000000f0 $src_ip $dst_ip $dns_reply $dns_req_data $
# NXT_RESUMEs should be 9.
OVS_WAIT_UNTIL([test 9 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
# Skipping the UDP checksum.
cat 1.expected | cut -c 1-120,125- > expout
AT_CHECK([cat 1.packets | cut -c 1-120,125-], [0], [expout])
@@ -8623,7 +8623,7 @@ grep actions=mod_dl_dst:f0:00:00:01:02:04 | wc -l` -eq 1
sleep 1
OVN_CHECK_PACKETS([ext1/vif1-tx.pcap], [ext1-vif1.expected])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $active_gw/br-phys_n1-tx.pcap > packets
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $active_gw/br-phys_n1-tx.pcap > packets
cat packets | grep $expected > exp
# Its possible that $active_gw/br-phys_n1-tx.pcap may have received multiple
# garp packets. So consider only the first packet.
@@ -8632,7 +8632,7 @@ grep actions=mod_dl_dst:f0:00:00:01:02:04 | wc -l` -eq 1
rm -f expout
if test $backup_vswitchd_dead != 1; then
# Check for backup gw only if vswitchd is alive
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $backup_gw/br-phys_n1-tx.pcap > packets
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $backup_gw/br-phys_n1-tx.pcap > packets
AT_CHECK([grep $expected packets | sort], [0], [])
fi
}
@@ -8872,12 +8872,12 @@ grep actions=mod_dl_dst:f0:00:00:01:02:04 | wc -l` -eq 1
as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet
OVN_CHECK_PACKETS([ext1/vif1-tx.pcap], [ext1-vif1.expected])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $active_gw/br-phys_n1-tx.pcap > packets
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $active_gw/br-phys_n1-tx.pcap > packets
cat packets | grep $expected > exp
cat packets | grep $exp_gw_ip_garp | head -1 >> exp
AT_CHECK([cat exp], [0], [expout])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $backup_gw/br-phys_n1-tx.pcap > packets
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $backup_gw/br-phys_n1-tx.pcap > packets
AT_CHECK([grep $expected packets | sort], [0], [])
}
@@ -9302,7 +9302,7 @@ OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100])
trim_zeros() {
sed 's/\(00\)\{1,\}$//'
}
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
echo $expected > expout
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80002000000000000c0a80002"
@@ -9350,7 +9350,7 @@ trim_zeros() {
sed 's/\(00\)\{1,\}$//'
}
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
garp_1="fffffffffffff0000000000308060001080006040001f00000000003c0a80003000000000000c0a80003"
echo $garp_1 > expout
garp_2="fffffffffffff0000000000408060001080006040001f00000000004c0a80004000000000000c0a80004"
@@ -9615,12 +9615,12 @@ ip_packet() {
# Check vlan tagged packet on the bridge connecting hv1 and hv2 with the
# foo1's mac.
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-ex_n2-tx.pcap | ip_packet | uniq > hv1-br-ex_n2
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-ex_n2-tx.pcap | ip_packet | uniq > hv1-br-ex_n2
cat hv1-br-ex_n2.expected > expout
AT_CHECK([sort hv1-br-ex_n2], [0], [expout])
# Check expected packet on nexthop interface
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv3/vif1-tx.pcap | grep ${foo1_ip}${dst_ip} | uniq > hv3-vif1
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/vif1-tx.pcap | grep ${foo1_ip}${dst_ip} | uniq > hv3-vif1
cat hv3-vif1.expected > expout
AT_CHECK([sort hv3-vif1], [0], [expout])
@@ -9650,11 +9650,11 @@ sent_garp="ffffffffffff0000010102038100000208060001080006040001000001010203c0a80
OVN_CHECK_PACKETS([hv1/vif1-tx.pcap], [foo1.expout])
# Wait until we receive atleast 1 packet
-OVS_WAIT_UNTIL([test 1=`$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap | wc -l`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap | head -1 > packets
+OVS_WAIT_UNTIL([test 1=`$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap | wc -l`])
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap | head -1 > packets
echo $sent_garp > expout
AT_CHECK([cat packets], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv4/br-ex_n2-tx.pcap > empty
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv4/br-ex_n2-tx.pcap > empty
AT_CHECK([cat empty], [0], [])
# Make hv4 master
@@ -9679,7 +9679,7 @@ OVN_CHECK_PACKETS([hv4/br-ex_n2-tx.pcap], [br-ex_n2.expout])
sleep 2
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap > empty
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-ex_n2-tx.pcap > empty
AT_CHECK([cat empty], [0], [])
OVN_CLEANUP([hv1],[hv2],[hv3], [hv4])
@@ -9807,7 +9807,7 @@ test_ipv6_ra 1 $src_mac $src_lla $addr_mode 0 $default_prefix_option_config
# NXT_RESUME should be 1.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
cat 1.expected | cut -c -112 > expout
AT_CHECK([cat 1.packets | cut -c -112], [0], [expout])
@@ -9838,7 +9838,7 @@ test_ipv6_ra 2 $src_mac $src_lla $addr_mode $mtu $default_prefix_option_config
# NXT_RESUME should be 2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
cat 2.expected | cut -c -112 > expout
AT_CHECK([cat 2.packets | cut -c -112], [0], [expout])
@@ -9868,7 +9868,7 @@ test_ipv6_ra 3 $src_mac $src_lla $addr_mode $mtu $default_prefix_option_config
# NXT_RESUME should be 3.
OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif3-tx.pcap > 3.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif3-tx.pcap > 3.packets
cat 3.expected | cut -c -112 > expout
AT_CHECK([cat 3.packets | cut -c -112], [0], [expout])
@@ -9898,7 +9898,7 @@ test_ipv6_ra 1 $src_mac $src_lla $addr_mode $mtu $default_prefix_option_config
# NXT_RESUME should be 4.
OVS_WAIT_UNTIL([test 4 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
cat 1.expected | cut -c -112 > expout
AT_CHECK([cat 1.packets | cut -c -112], [0], [expout])
@@ -9928,7 +9928,7 @@ test_ipv6_ra 1 $src_mac $src_lla $addr_mode $mtu $default_prefix_option_config
# NXT_RESUME should be 4 only.
OVS_WAIT_UNTIL([test 4 = `cat ofctl_monitor*.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > 1.packets
AT_CHECK([cat 1.packets], [0], [])
OVN_CLEANUP([hv1])
@@ -10790,15 +10790,15 @@ only_broadcast_from_lrp1() {
garp="fffffffffffff0000000000108060001080006040001f00000000001c0a80064000000000000c0a80064"
echo $garp > expout
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoop_tx
echo "packets on hv1-snoopvif:"
cat hv1_snoop_tx
AT_CHECK([sort hv1_snoop_tx], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
echo "packets on hv2 br-phys tx"
cat hv2_br_phys_tx
AT_CHECK([grep $garp hv2_br_phys_tx | sort], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
echo "packets on hv3 br-phys tx"
cat hv3_br_phys_tx
AT_CHECK([grep $garp hv3_br_phys_tx | sort], [0], [])
@@ -10824,11 +10824,11 @@ trim_zeros() {
sed 's/\(00\)\{1,\}$//'
}
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx
AT_CHECK([sort hv1_snoopvif_tx], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
AT_CHECK([grep $garp hv3_br_phys_tx | sort], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
AT_CHECK([grep $garp hv2_br_phys_tx | sort], [0], [])
# change localnet port tag.
@@ -10869,11 +10869,11 @@ trim_zeros() {
garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064"
echo $garp > expout
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv1_snoopvif_tx
AT_CHECK([sort hv1_snoopvif_tx], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv3/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv3_br_phys_tx
AT_CHECK([grep $garp hv3_br_phys_tx | sort], [0], [expout])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
AT_CHECK([grep $garp hv2_br_phys_tx | sort], [0], [])
OVN_CLEANUP([hv1],[hv2],[hv3])
@@ -11086,9 +11086,9 @@ $mcast_node_ip $nd_target
OVS_WAIT_WHILE([test 24 = $(wc -c hv1/br-phys_n1-tx.pcap | cut -d " " -f1)])
OVS_WAIT_WHILE([test 24 = $(wc -c hv1/br-phys-tx.pcap | cut -d " " -f1)])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap | \
trim_zeros > 1.packets
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | \
trim_zeros > 2.packets
cat ipv6_ns.expected | cut -c -112 > expout
@@ -11119,9 +11119,9 @@ $mcast_node_ip $nd_target
OVS_WAIT_WHILE([test 24 = $(wc -c hv1/br-phys_n1-tx.pcap | cut -d " " -f1)])
OVS_WAIT_WHILE([test 24 = $(wc -c hv1/br-phys-tx.pcap | cut -d " " -f1)])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap | \
trim_zeros > 1.packets
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | \
trim_zeros > 2.packets
cat ipv6_ns.expected | cut -c -112 > expout
@@ -11366,7 +11366,7 @@ ra_test() {
for i in hv1 hv2 ; do
OVS_WAIT_WHILE([test 24 = $(wc -c $i/vif1-tx.pcap | cut -d " " -f1)])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" $i/vif1-tx.pcap > packets
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" $i/vif1-tx.pcap > packets
cat expected | cut -c -112 > expout
AT_CHECK([cat packets | cut -c -112], [0], [expout])
@@ -12217,7 +12217,7 @@ dip=`ip_to_hex 10 0 0 6`
test_ip 1 f00000000001 f00000000002 $sip $dip 2
cat 2.expected > expout
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
AT_CHECK([cat 2.packets], [0], [expout])
# There should be total of 12 flows present with conjunction action and 2 flows
@@ -12256,7 +12256,7 @@ sip=`ip_to_hex 10 0 0 4`
dip=`ip_to_hex 10 0 0 7`
test_ip 1 f00000000001 f00000000002 $sip $dip
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap > 2.packets
AT_CHECK([cat 2.packets], [0], [])
AT_CLEANUP
@@ -12973,7 +12973,7 @@ OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 0 in hv2.
OVS_WAIT_UNTIL([test 0 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
cat ext1_v4.expected | cut -c -48 > expout
AT_CHECK([cat ext1_v4.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -13000,7 +13000,7 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 0 in hv2.
OVS_WAIT_UNTIL([test 0 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
sort > ext1_v6.packets
cat ext1_v6.expected | cut -c -120 > expout
AT_CHECK([cat ext1_v6.packets | cut -c -120], [0], [expout])
@@ -13071,7 +13071,7 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 1 in hv2.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
cat ext1_v4.expected | cut -c -48 > expout
AT_CHECK([cat ext1_v4.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -13097,7 +13097,7 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 2 in hv2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
sort > ext1_v6.packets
cat ext1_v6.expected | cut -c -120 > expout
AT_CHECK([cat ext1_v6.packets | cut -c -120], [0], [expout])
@@ -13131,11 +13131,11 @@ arp_request=ffffffffffff${ext1_mac}08060001080006040001${ext1_mac}${ext1_ip}0000
as hv1 ovs-appctl netdev-dummy/receive hv1-ext1 $arp_request
expected_response=${src_mac}${router_mac}08060001080006040002${router_mac}${router_ip}${ext1_mac}${ext1_ip}
echo $expected_response > expout
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_arp_resp
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_arp_resp
AT_CHECK([cat ext1_arp_resp], [0], [expout])
# Verify that the response came from hv2
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap > ext1_arp_resp
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap > ext1_arp_resp
AT_CHECK([cat ext1_arp_resp], [0], [expout])
# Now add 3 ha chassis to the ha chassis group
@@ -13181,7 +13181,7 @@ OVS_WAIT_UNTIL([test 3 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 2 in hv2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
cat ext1_v4.expected | cut -c -48 > expout
AT_CHECK([cat ext1_v4.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -13208,7 +13208,7 @@ OVS_WAIT_UNTIL([test 4 = `cat ofctl_monitor0_hv1.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 2 in hv2.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
sort > ext1_v6.packets
cat ext1_v6.expected | cut -c -120 > expout
AT_CHECK([cat ext1_v6.packets | cut -c -120], [0], [expout])
@@ -13264,7 +13264,7 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 1 in hv3.
OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor0_hv3.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap > ext1_v4.packets
cat ext1_v4.expected | cut -c -48 > expout
AT_CHECK([cat ext1_v4.packets | cut -c -48], [0], [expout])
# Skipping the IPv4 checksum.
@@ -13294,7 +13294,7 @@ OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv2.log | grep -c NXT_RESUME`])
# NXT_RESUMEs should be 2 in hv3.
OVS_WAIT_UNTIL([test 2 = `cat ofctl_monitor0_hv3.log | grep -c NXT_RESUME`])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/ext1-tx.pcap | \
sort > ext1_v6.packets
cat ext1_v6.expected | cut -c -120 > expout
AT_CHECK([cat ext1_v6.packets | cut -c -120], [0], [expout])
@@ -13665,14 +13665,14 @@ test_ip_packet_larger() {
if test $icmp_pmtu_reply_expected = 0; then
OVN_CHECK_PACKETS([hv1/br-phys_n1-tx.pcap], [br_phys_n1.expected])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > pkts
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/vif1-tx.pcap > pkts
# hv1/vif1-tx.pcap can receive the GARP packet generated by ovn-controller
# for the gateway router port. So ignore this packet.
cat pkts | grep -v $gw_ip_garp > packets
AT_CHECK([cat packets], [0], [])
else
OVN_CHECK_PACKETS([hv1/vif1-tx.pcap], [hv1-vif1.expected])
- $PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap > \
+ $PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys_n1-tx.pcap > \
pkts
# hv1/br-phys_n1-tx.pcap can receive the GARP packet generated by ovn-controller
# for the gateway router port. So ignore this packet.
@@ -13947,8 +13947,8 @@ OVS_WAIT_UNTIL([test `ovn-sbctl find mac_binding logical_port="lr1-pub" ip="172.
# Check that the GARPs went also to the external physical network
# Wait until at least 4 packets have arrived and copy them to a separate file as
# more GARPs are expected in the capture in order to avoid race conditions.
-OVS_WAIT_UNTIL([test `$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | wc -l` -gt 4])
-$PYTHON "$top_srcdir/ovs/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | head -n4 > hv1/br-phys-tx4.pcap
+OVS_WAIT_UNTIL([test `$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | wc -l` -gt 4])
+$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/br-phys-tx.pcap | head -n4 > hv1/br-phys-tx4.pcap
# GARP for lp0 172.24.4.100 on lr0-pub MAC (f0:00:00:00:00:01)
echo "fffffffffffff0000000000108060001080006040001f00000000001ac180464000000000000ac180464" > expout
diff --git a/tests/ovsdb-macros.at b/tests/ovsdb-macros.at
index 638894794..83e3df750 100644
--- a/tests/ovsdb-macros.at
+++ b/tests/ovsdb-macros.at
@@ -3,7 +3,7 @@ dnl
dnl Creates an empty database named $1.
m4_define([OVSDB_INIT],
[AT_CHECK(
- [ovsdb-tool create $1 $abs_top_srcdir/vswitchd/vswitch.ovsschema],
+ [ovsdb-tool create $1 $ovs_srcdir/vswitchd/vswitch.ovsschema],
[0], [stdout], [ignore])
AT_CHECK(
[[ovsdb-tool transact $1 \
diff --git a/tutorial/automake.mk b/tutorial/automake.mk
index b7ea10c98..13b3bee05 100644
--- a/tutorial/automake.mk
+++ b/tutorial/automake.mk
@@ -9,4 +9,4 @@ EXTRA_DIST += \
tutorial/ovn-setup.sh
sandbox: all
cd $(srcdir)/tutorial && MAKE=$(MAKE) HAVE_OPENSSL=$(HAVE_OPENSSL) \
- ./ovs-sandbox -b $(abs_builddir) $(SANDBOXFLAGS)
+ ./ovs-sandbox -b $(abs_builddir) --ovs-src $(ovs_srcdir) --ovs-build $(ovs_builddir) $(SANDBOXFLAGS)
diff --git a/tutorial/ovs-sandbox b/tutorial/ovs-sandbox
index 7546d27ca..a19dea2f1 100755
--- a/tutorial/ovs-sandbox
+++ b/tutorial/ovs-sandbox
@@ -63,7 +63,9 @@ gdb_ovn_controller_ex=false
gdb_ovn_controller_vtep=false
gdb_ovn_controller_vtep_ex=false
builddir=
+ovsbuilddir=
srcdir=
+ovssrcdir=
schema=
installed=false
built=false
@@ -111,9 +113,11 @@ If you run ovs-sandbox from an OVS build directory, it uses the OVS that
you built. Otherwise, if you have an installed Open vSwitch, it uses
the installed version.
-These options force ovs-sandbox to use a particular OVS build:
- -b, --builddir=DIR specify Open vSwitch build directory
- -s, --srcdir=DIR specify Open vSwitch source directory
+These options force ovs-sandbox to use a particular OVN and OVS build:
+ -b, --builddir=DIR specify OVN build directory
+ -s, --srcdir=DIR specify OVN source directory
+ --ovs-build, --ovsbuilddir=DIR specify Open vSwitch build directory
+ --ovs-src, --ovssrcdir=DIR specify Open vSwitch source directory
These options force ovs-sandbox to use an installed Open vSwitch:
-i, --installed use installed Open vSwitch
@@ -150,6 +154,18 @@ EOF
prev=builddir
built=:
;;
+ --ovs-build*=*)
+ ovsbuilddir=$optarg
+ ;;
+ --ovs-build*)
+ prev=ovsbuilddir
+ ;;
+ --ovs-src*=*)
+ ovssrcdir=$optarg
+ ;;
+ --ovs-src*)
+ prev=ovssrcdir
+ ;;
--sr*=*)
srcdir=$optarg
built=false
@@ -278,8 +294,8 @@ else
fi
if $built; then
- if test ! -e "$builddir"/ovs/vswitchd/ovs-vswitchd; then
- echo "$builddir does not appear to be an OVS build directory" >&2
+ if test ! -e "$builddir"/controller/ovn-controller; then
+ echo "$builddir does not appear to be an OVN build directory" >&2
exit 1
fi
builddir=`cd $builddir && pwd`
@@ -295,7 +311,7 @@ if $built; then
/*) ;;
*) srcdir=`pwd`/$srcdir ;;
esac
- schema=$srcdir/ovs/vswitchd/vswitch.ovsschema
+ schema=$ovssrcdir/vswitchd/vswitch.ovsschema
if test ! -e "$schema"; then
echo >&2 'source directory not found, please use --srcdir'
exit 1
@@ -311,7 +327,7 @@ if $built; then
echo >&2 'source directory not found, please use --srcdir'
exit 1
fi
- vtep_schema=$srcdir/ovs/vtep/vtep.ovsschema
+ vtep_schema=$ovssrcdir/vtep/vtep.ovsschema
if test ! -e "$vtep_schema"; then
echo >&2 'source directory not found, please use --srcdir'
exit 1
@@ -319,14 +335,12 @@ if $built; then
fi
# Put built tools early in $PATH.
- if test ! -e $builddir/ovs/vswitchd/ovs-vswitchd; then
+ if test ! -e $ovsbuilddir/vswitchd/ovs-vswitchd; then
echo >&2 'build not found, please change set $builddir or change directory'
exit 1
fi
- PATH=$builddir/ovs/ovsdb:$builddir/ovs/vswitchd:$builddir/ovs/utilities:$builddir/ovs/vtep:$PATH
- if $ovn; then
- PATH=$builddir/controller:$builddir/controller-vtep:$builddir/northd:$builddir/utilities:$PATH
- fi
+ PATH=$ovsbuilddir/ovsdb:$ovsbuilddir/vswitchd:$ovsbuilddir/utilities:$ovsbuilddir/vtep:$PATH
+ PATH=$builddir/controller:$builddir/controller-vtep:$builddir/northd:$builddir/utilities:$PATH
export PATH
else
case $schema in
@@ -347,10 +361,8 @@ else
echo "can't find vswitch.ovsschema, please specify --schema" >&2
exit 1
fi
- if $ovn; then
- echo "running with ovn is only supported from the build dir." >&2
- exit 1
- fi
+ echo "running with ovn is only supported from the build dir." >&2
+ exit 1
fi
# Create sandbox.
@@ -378,109 +390,108 @@ trap 'kill `cat "$sandbox"/*.pid`' 0 1 2 3 13 14 15
touch "$sandbox"/.conf.db.~lock~
run ovsdb-tool create conf.db "$schema"
ovsdb_server_args=
-if $ovn; then
- touch "$sandbox"/.ovnnb.db.~lock~
- run ovsdb-tool create ovnnb.db "$ovnnb_schema"
- run ovsdb-tool create vtep.db "$vtep_schema"
- ovsdb_server_args="vtep.db conf.db"
- ovsdb_nb_server_args="ovnnb.db"
-
- if [ "$HAVE_OPENSSL" = yes ]; then
- OVS_PKI="run ovs-pki --dir=$sandbox/pki --log=$sandbox/ovs-pki.log"
- $OVS_PKI init
- $OVS_PKI req+sign ovnsb switch
- $OVS_PKI req+sign ovnnb switch
- for i in $(seq $n_controllers); do
- $OVS_PKI -u req+sign chassis-$i switch
- done
- fi
+
+touch "$sandbox"/.ovnnb.db.~lock~
+run ovsdb-tool create ovnnb.db "$ovnnb_schema"
+run ovsdb-tool create vtep.db "$vtep_schema"
+ovsdb_server_args="vtep.db conf.db"
+ovsdb_nb_server_args="ovnnb.db"
+
+if [ "$HAVE_OPENSSL" = yes ]; then
+ OVS_PKI="run ovs-pki --dir=$sandbox/pki --log=$sandbox/ovs-pki.log"
+ $OVS_PKI init
+ $OVS_PKI req+sign ovnsb switch
+ $OVS_PKI req+sign ovnnb switch
+ for i in $(seq $n_controllers); do
+ $OVS_PKI -u req+sign chassis-$i switch
+ done
fi
+
rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir --pidfile -vconsole:off --log-file -vsyslog:off \
--remote=punix:"$sandbox"/db.sock \
--remote=db:Open_vSwitch,Open_vSwitch,manager_options \
$ovsdb_server_args
-if $ovn; then
- ovn_start_db() {
- local db=$1 model=$2 servers=$3 schema=$4
- local DB=$(echo $db | tr a-z A-Z)
- local schema_name=$(ovsdb-tool schema-name $schema)
-
- case $model in
- standalone | backup) ;;
- clustered)
- case $servers in
- [1-9] | [1-9][0-9]) ;;
- *) echo "${db}db servers must be between 1 and 99" >&2
- exit 1
- ;;
- esac
- ;;
- *)
- echo "unknown ${db}db model \"$model\"" >&2
- exit 1
- ;;
- esac
-
- ovn_start_ovsdb_server() {
- local i=$1; shift
- rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir \
- --pidfile=$db$i.pid -vconsole:off --log-file=$db$i.log \
- -vsyslog:off \
- --remote=db:$schema_name,${DB}_Global,connections \
- --private-key=db:$schema_name,SSL,private_key \
- --certificate=db:$schema_name,SSL,certificate \
- --ca-cert=db:$schema_name,SSL,ca_cert \
- --ssl-protocols=db:$schema_name,SSL,ssl_protocols \
- --ssl-ciphers=db:$schema_name,SSL,ssl_ciphers \
- --unixctl=${db}$i --remote=punix:$db$i.ovsdb ${db}$i.db "$@"
- }
-
- case $model in
- standalone)
- run ovsdb-tool create ${db}1.db "$schema"
- ovn_start_ovsdb_server 1
- remote=unix:${db}1.ovsdb
- ;;
- backup)
- for i in 1 2; do
- run ovsdb-tool create $db$i.db "$schema"
- done
- ovn_start_ovsdb_server 1
- ovn_start_ovsdb_server 2 --sync-from=unix:${db}1.ovsdb
- remote=unix:${db}1.ovsdb
- backup_note="$backup_note
+
+ovn_start_db() {
+ local db=$1 model=$2 servers=$3 schema=$4
+ local DB=$(echo $db | tr a-z A-Z)
+ local schema_name=$(ovsdb-tool schema-name $schema)
+
+ case $model in
+ standalone | backup) ;;
+ clustered)
+ case $servers in
+ [1-9] | [1-9][0-9]) ;;
+ *) echo "${db}db servers must be between 1 and 99" >&2
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "unknown ${db}db model \"$model\"" >&2
+ exit 1
+ ;;
+ esac
+
+ ovn_start_ovsdb_server() {
+ local i=$1; shift
+ rungdb $gdb_ovsdb $gdb_ovsdb_ex ovsdb-server --detach --no-chdir \
+ --pidfile=$db$i.pid -vconsole:off --log-file=$db$i.log \
+ -vsyslog:off \
+ --remote=db:$schema_name,${DB}_Global,connections \
+ --private-key=db:$schema_name,SSL,private_key \
+ --certificate=db:$schema_name,SSL,certificate \
+ --ca-cert=db:$schema_name,SSL,ca_cert \
+ --ssl-protocols=db:$schema_name,SSL,ssl_protocols \
+ --ssl-ciphers=db:$schema_name,SSL,ssl_ciphers \
+ --unixctl=${db}$i --remote=punix:$db$i.ovsdb ${db}$i.db "$@"
+ }
+
+ case $model in
+ standalone)
+ run ovsdb-tool create ${db}1.db "$schema"
+ ovn_start_ovsdb_server 1
+ remote=unix:${db}1.ovsdb
+ ;;
+ backup)
+ for i in 1 2; do
+ run ovsdb-tool create $db$i.db "$schema"
+ done
+ ovn_start_ovsdb_server 1
+ ovn_start_ovsdb_server 2 --sync-from=unix:${db}1.ovsdb
+ remote=unix:${db}1.ovsdb
+ backup_note="$backup_note
The backup server of OVN $DB can be accessed by:
* ovn-${db}ctl --db=unix:`pwd`/sandbox/${db}2.ovsdb
* ovs-appctl -t `pwd`/sandbox/${db}2
The backup database file is sandbox/${db}2.db
"
- ;;
- clustered)
- for i in $(seq $servers); do
- if test $i = 1; then
- run ovsdb-tool create-cluster ${db}1.db "$schema" unix:${db}1.raft;
- else
- run ovsdb-tool join-cluster $db$i.db $schema_name unix:$db$i.raft unix:${db}1.raft
- fi
- ovn_start_ovsdb_server $i
- done
- remote=unix:${db}1.ovsdb
- for i in `seq 2 $servers`; do
- remote=$remote,unix:$db$i.ovsdb
- done
- for i in $(seq $servers); do
- run ovsdb-client wait unix:$db$i.ovsdb $schema_name connected
- done
- ;;
- esac
- eval OVN_${DB}_DB=\$remote
- eval export OVN_${DB}_DB
- }
+ ;;
+ clustered)
+ for i in $(seq $servers); do
+ if test $i = 1; then
+ run ovsdb-tool create-cluster ${db}1.db "$schema" unix:${db}1.raft;
+ else
+ run ovsdb-tool join-cluster $db$i.db $schema_name unix:$db$i.raft unix:${db}1.raft
+ fi
+ ovn_start_ovsdb_server $i
+ done
+ remote=unix:${db}1.ovsdb
+ for i in `seq 2 $servers`; do
+ remote=$remote,unix:$db$i.ovsdb
+ done
+ for i in $(seq $servers); do
+ run ovsdb-client wait unix:$db$i.ovsdb $schema_name connected
+ done
+ ;;
+ esac
+ eval OVN_${DB}_DB=\$remote
+ eval export OVN_${DB}_DB
+}
- backup_note=
- ovn_start_db nb "$nbdb_model" "$nbdb_servers" "$ovnnb_schema"
- ovn_start_db sb "$sbdb_model" "$sbdb_servers" "$ovnsb_schema"
-fi
+backup_note=
+ovn_start_db nb "$nbdb_model" "$nbdb_servers" "$ovnnb_schema"
+ovn_start_db sb "$sbdb_model" "$sbdb_servers" "$ovnsb_schema"
#Add a small delay to allow ovsdb-server to launch.
sleep 0.1
@@ -501,49 +512,47 @@ run ovs-vsctl --no-wait -- init
rungdb $gdb_vswitchd $gdb_vswitchd_ex ovs-vswitchd --detach --no-chdir --pidfile -vconsole:off --log-file -vsyslog:off \
--enable-dummy=$dummy -vvconn -vnetdev_dummy
-if $ovn; then
- ovn-nbctl init
- ovn-sbctl init
-
- ovs-vsctl set open . external-ids:system-id=chassis-1
- ovs-vsctl set open . external-ids:hostname=sandbox
- ovs-vsctl set open . external-ids:ovn-encap-type=geneve
- ovs-vsctl set open . external-ids:ovn-encap-ip=127.0.0.1
-
- if [ "$HAVE_OPENSSL" = yes ]; then
- ovn-nbctl set-ssl $sandbox/ovnnb-privkey.pem $sandbox/ovnnb-cert.pem $sandbox/pki/switchca/cacert.pem
- ovn-nbctl set-connection pssl:6641
- ovn-sbctl set-ssl $sandbox/ovnsb-privkey.pem $sandbox/ovnsb-cert.pem $sandbox/pki/switchca/cacert.pem
- if $ovn_rbac; then
- ovn-sbctl set-connection role=ovn-controller pssl:6642
- else
- ovn-sbctl set-connection pssl:6642
- fi
- ovs-vsctl set open . external-ids:ovn-remote=ssl:127.0.0.1:6642
- OVN_CTRLR_PKI="-p $sandbox/chassis-1-privkey.pem -c $sandbox/chassis-1-cert.pem -C $sandbox/pki/switchca/cacert.pem"
+ovn-nbctl init
+ovn-sbctl init
+
+ovs-vsctl set open . external-ids:system-id=chassis-1
+ovs-vsctl set open . external-ids:hostname=sandbox
+ovs-vsctl set open . external-ids:ovn-encap-type=geneve
+ovs-vsctl set open . external-ids:ovn-encap-ip=127.0.0.1
+
+if [ "$HAVE_OPENSSL" = yes ]; then
+ ovn-nbctl set-ssl $sandbox/ovnnb-privkey.pem $sandbox/ovnnb-cert.pem $sandbox/pki/switchca/cacert.pem
+ ovn-nbctl set-connection pssl:6641
+ ovn-sbctl set-ssl $sandbox/ovnsb-privkey.pem $sandbox/ovnsb-cert.pem $sandbox/pki/switchca/cacert.pem
+ if $ovn_rbac; then
+ ovn-sbctl set-connection role=ovn-controller pssl:6642
else
- ovs-vsctl set open . external-ids:ovn-remote=$OVN_SB_DB
- OVN_CTRLR_PKI=""
+ ovn-sbctl set-connection pssl:6642
fi
- for i in $(seq $n_northds); do
- if [ $i -eq 1 ]; then inst=""; else inst=$i; fi
- rungdb $gdb_ovn_northd $gdb_ovn_northd_ex ovn-northd --detach \
- --no-chdir --pidfile=ovn-northd${inst}.pid -vconsole:off \
- --log-file=ovn-northd${inst}.log -vsyslog:off \
- --ovnsb-db="$OVN_SB_DB" --ovnnb-db="$OVN_NB_DB"
- done
- for i in $(seq $n_controllers); do
- if [ $i -eq 1 ]; then inst=""; else inst=$i; fi
- rungdb $gdb_ovn_controller $gdb_ovn_controller_ex ovn-controller \
- $OVN_CTRLR_PKI --detach --no-chdir -vsyslog:off \
- --log-file=ovn-controller${inst}.log \
- --pidfile=ovn-controller${inst}.pid -vconsole:off
- done
- rungdb $gdb_ovn_controller_vtep $gdb_ovn_controller_vtep_ex \
- ovn-controller-vtep --detach --no-chdir --pidfile -vconsole:off \
- $OVN_CTRLR_PKI --log-file -vsyslog:off \
- --ovnsb-db=unix:"$sandbox"/ovnsb_db.sock
+ ovs-vsctl set open . external-ids:ovn-remote=ssl:127.0.0.1:6642
+ OVN_CTRLR_PKI="-p $sandbox/chassis-1-privkey.pem -c $sandbox/chassis-1-cert.pem -C $sandbox/pki/switchca/cacert.pem"
+else
+ ovs-vsctl set open . external-ids:ovn-remote=$OVN_SB_DB
+ OVN_CTRLR_PKI=""
fi
+for i in $(seq $n_northds); do
+ if [ $i -eq 1 ]; then inst=""; else inst=$i; fi
+ rungdb $gdb_ovn_northd $gdb_ovn_northd_ex ovn-northd --detach \
+ --no-chdir --pidfile=ovn-northd${inst}.pid -vconsole:off \
+ --log-file=ovn-northd${inst}.log -vsyslog:off \
+ --ovnsb-db="$OVN_SB_DB" --ovnnb-db="$OVN_NB_DB"
+done
+for i in $(seq $n_controllers); do
+ if [ $i -eq 1 ]; then inst=""; else inst=$i; fi
+ rungdb $gdb_ovn_controller $gdb_ovn_controller_ex ovn-controller \
+ $OVN_CTRLR_PKI --detach --no-chdir -vsyslog:off \
+ --log-file=ovn-controller${inst}.log \
+ --pidfile=ovn-controller${inst}.pid -vconsole:off
+done
+rungdb $gdb_ovn_controller_vtep $gdb_ovn_controller_vtep_ex \
+ ovn-controller-vtep --detach --no-chdir --pidfile -vconsole:off \
+ $OVN_CTRLR_PKI --log-file -vsyslog:off \
+ --ovnsb-db=unix:"$sandbox"/ovnsb_db.sock
cat <<EOF
@@ -554,13 +563,10 @@ You are running in a dummy Open vSwitch environment. You can use
ovs-vsctl, ovs-ofctl, ovs-appctl, and other tools to work with the
dummy switch.
-EOF
-if $ovn; then cat << EOF
This environment also has the OVN daemons and databases enabled.
You can use ovn-nbctl and ovn-sbctl to interact with the OVN databases.
$backup_note
EOF
-fi
cat <<EOF
Log files, pidfiles, and the configuration database are in the
"sandbox" subdirectory.
--
2.20.1
More information about the dev
mailing list