[ovs-dev] [PATCH v6] netdev-dpdk: add support for the RTE_ETH_EVENT_INTR_RESET event

Eelco Chaudron echaudro at redhat.com
Tue Dec 17 13:48:13 UTC 2019


Any comments on this patch? Guess it might be waiting for “[PATCH] 
bridge: Allow manual notifications about interfaces”.

Would like to get this ready for 2.13…

Cheers,

Eelco

> On 11 Nov 2019, at 15:02, Eelco Chaudron wrote:
>
>> Currently, OVS does not register and therefore not handle the
>> interface reset event from the DPDK framework. This would cause a
>> problem in cases where a VF is used as an interface, and its
>> configuration changes.
>>
>> As an example in the following scenario the MAC change is not
>> detected/acted upon until OVS is restarted without the patch applied:
>>
>>   $ echo 1 > /sys/bus/pci/devices/0000:05:00.1/sriov_numvfs
>>   $ ovs-vsctl add-port ovs_pvp_br0 dpdk0 -- \
>>             set Interface dpdk0 type=dpdk -- \
>>             set Interface dpdk0 options:dpdk-devargs=0000:05:0a.0
>>
>>   $ ip link set p5p2 vf 0 mac 52:54:00:92:d3:33
>>
>> Requires patch "bridge: Allow manual notifications about interfaces' 
>> updates."
>>
>> Signed-off-by: Eelco Chaudron <echaudro at redhat.com>
>> ---
>> v5 -> v6:
>>   Moved the if_notifier_manual_report() function till after the
>>   actual reset of the interface to make it more clear that it's
>>   supposed to happen AFTER the reset.
>>
>>   Removed empty line in the code
>>
>> v4 -> v5:
>>   Using new if_notifier_manual_report() API
>>
>> v3 -> v4:
>>   Add support for if-notification to make sure set_config()
>>   gets called
>>
>> v2 -> v3:
>> v1 -> v2:
>>   Fixed Ilya's comments
>>
>>  lib/netdev-dpdk.c |   54 
>> +++++++++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 52 insertions(+), 2 deletions(-)
>>
>> diff --git a/lib/netdev-dpdk.c b/lib/netdev-dpdk.c
>> index 4805783..cb57b96 100644
>> --- a/lib/netdev-dpdk.c
>> +++ b/lib/netdev-dpdk.c
>> @@ -46,6 +46,7 @@
>>  #include "dpdk.h"
>>  #include "dpif-netdev.h"
>>  #include "fatal-signal.h"
>> +#include "if-notifier.h"
>>  #include "netdev-provider.h"
>>  #include "netdev-vport.h"
>>  #include "odp-util.h"
>> @@ -396,6 +397,8 @@ struct netdev_dpdk {
>>          bool attached;
>>          /* If true, rte_eth_dev_start() was successfully called */
>>          bool started;
>> +        bool reset_needed;
>> +        /* 1 pad byte here. */
>>          struct eth_addr hwaddr;
>>          int mtu;
>>          int socket_id;
>> @@ -1173,6 +1176,8 @@ common_construct(struct netdev *netdev, 
>> dpdk_port_t port_no,
>>      ovsrcu_index_init(&dev->vid, -1);
>>      dev->vhost_reconfigured = false;
>>      dev->attached = false;
>> +    dev->started = false;
>> +    dev->reset_needed = false;
>>
>>      ovsrcu_init(&dev->qos_conf, NULL);
>>
>> @@ -1769,6 +1774,34 @@ netdev_dpdk_process_devargs(struct netdev_dpdk 
>> *dev,
>>      return new_port_id;
>>  }
>>
>> +static int
>> +dpdk_eth_event_callback(dpdk_port_t port_id, enum rte_eth_event_type 
>> type,
>> +                        void *param OVS_UNUSED, void *ret_param 
>> OVS_UNUSED)
>> +{
>> +    struct netdev_dpdk *dev;
>> +
>> +    switch ((int) type) {
>> +    case RTE_ETH_EVENT_INTR_RESET:
>> +        ovs_mutex_lock(&dpdk_mutex);
>> +        dev = netdev_dpdk_lookup_by_port_id(port_id);
>> +        if (dev) {
>> +            ovs_mutex_lock(&dev->mutex);
>> +            dev->reset_needed = true;
>> +            netdev_request_reconfigure(&dev->up);
>> +            VLOG_DBG_RL(&rl, "%s: Device reset requested.",
>> +                        netdev_get_name(&dev->up));
>> +            ovs_mutex_unlock(&dev->mutex);
>> +        }
>> +        ovs_mutex_unlock(&dpdk_mutex);
>> +        break;
>> +
>> +    default:
>> +        /* Ignore all other types. */
>> +        break;
>> +   }
>> +   return 0;
>> +}
>> +
>>  static void
>>  dpdk_set_rxq_config(struct netdev_dpdk *dev, const struct smap 
>> *args)
>>      OVS_REQUIRES(dev->mutex)
>> @@ -3807,6 +3840,8 @@ netdev_dpdk_class_init(void)
>>      /* This function can be called for different classes.  The 
>> initialization
>>       * needs to be done only once */
>>      if (ovsthread_once_start(&once)) {
>> +        int ret;
>> +
>>          ovs_thread_create("dpdk_watchdog", dpdk_watchdog, NULL);
>>          unixctl_command_register("netdev-dpdk/set-admin-state",
>>                                   "[netdev] up|down", 1, 2,
>> @@ -3820,6 +3855,14 @@ netdev_dpdk_class_init(void)
>>                                   "[netdev]", 0, 1,
>>                                   netdev_dpdk_get_mempool_info, 
>> NULL);
>>
>> +        ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
>> +                                            
>> RTE_ETH_EVENT_INTR_RESET,
>> +                                            dpdk_eth_event_callback, 
>> NULL);
>> +        if (ret != 0) {
>> +            VLOG_ERR("Ethernet device callback register error: %s",
>> +                     rte_strerror(-ret));
>> +        }
>> +
>>          ovsthread_once_done(&once);
>>      }
>>
>> @@ -4180,13 +4223,20 @@ netdev_dpdk_reconfigure(struct netdev 
>> *netdev)
>>          && dev->rxq_size == dev->requested_rxq_size
>>          && dev->txq_size == dev->requested_txq_size
>>          && dev->socket_id == dev->requested_socket_id
>> -        && dev->started) {
>> +        && dev->started && !dev->reset_needed) {
>>          /* Reconfiguration is unnecessary */
>>
>>          goto out;
>>      }
>>
>> -    rte_eth_dev_stop(dev->port_id);
>> +    if (dev->reset_needed) {
>> +        rte_eth_dev_reset(dev->port_id);
>> +        if_notifier_manual_report();
>> +        dev->reset_needed = false;
>> +    } else {
>> +        rte_eth_dev_stop(dev->port_id);
>> +    }
>> +
>>      dev->started = false;
>>
>>      err = netdev_dpdk_mempool_configure(dev);
>>
>> _______________________________________________
>> dev mailing list
>> dev at openvswitch.org
>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>
> _______________________________________________
> dev mailing list
> dev at openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev



More information about the dev mailing list