[ovs-dev] doc: Add "Representors" topic document

[0-day Robot]

Bleep bloop.  Greetings Ophir Munk, I am a robot and I have tried out your patch.
Thanks for your contribution.

I encountered some error that I wasn't expecting.  See the details below.


checkpatch:
WARNING: Line is 160 characters long (recommended limit is 79)
#85 FILE: Documentation/topics/dpdk/phy.rst:286:
In the following example we create one representor on PF address ``0000:05:00.0``. Once the NIC is bounded to a DPDK compatible PMD the representor is created::

WARNING: Line is 116 characters long (recommended limit is 79)
#91 FILE: Documentation/topics/dpdk/phy.rst:292:
In the following example we create two representors on PF address ``0000:05:00.0`` and net device name ``enp3s0f0``.

WARNING: Line is 164 characters long (recommended limit is 79)
#93 FILE: Documentation/topics/dpdk/phy.rst:294:
- Ensure SR-IOV is enabled on the system. Enable IOMMU in Linux by adding ``intel_iommu=on`` to kernel parameters, for example, using GRUB (see /etc/grub/grub.conf)

WARNING: Line is 82 characters long (recommended limit is 79)
#98 FILE: Documentation/topics/dpdk/phy.rst:299:
    05:00.0 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]

WARNING: Line is 82 characters long (recommended limit is 79)
#99 FILE: Documentation/topics/dpdk/phy.rst:300:
    05:00.1 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]

WARNING: Line is 82 characters long (recommended limit is 79)
#108 FILE: Documentation/topics/dpdk/phy.rst:309:
    05:00.0 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]

WARNING: Line is 82 characters long (recommended limit is 79)
#109 FILE: Documentation/topics/dpdk/phy.rst:310:
    05:00.1 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]

WARNING: Line is 99 characters long (recommended limit is 79)
#110 FILE: Documentation/topics/dpdk/phy.rst:311:
    05:00.2 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]

WARNING: Line is 99 characters long (recommended limit is 79)
#111 FILE: Documentation/topics/dpdk/phy.rst:312:
    05:00.3 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4 Virtual Function]

WARNING: Line has trailing whitespace
#113 FILE: Documentation/topics/dpdk/phy.rst:314:
- Unbind the relevant VFs 0000:05:00.2..0000:05:00.3:: 

WARNING: Line is 118 characters long (recommended limit is 79)
#118 FILE: Documentation/topics/dpdk/phy.rst:319:
- The Mellanox NIC has an e-switch on it. Change the e-switch mode from legacy to switchdev using the PF PCI address::

Lines checked: 157, Warnings: 11, Errors: 0


Please check this out.  If you feel there has been an error, please email aconole at bytheb.org

Thanks,
0-day Robot