[ovs-dev] [PATCH v2 3/3] OVN: use trigger_event action to report 'empty_lb_rule' events

Lorenzo Bianconi lorenzo.bianconi at redhat.com
Thu Jul 11 15:48:45 UTC 2019


Add northd logical flows in order to reports that the controller
received an IP packet for LB rule witn no backends.
This configuration is used by OpenShift to spin up a idle POD

Signed-off-by: Mark Michelson <mmichels at redhat.com>
Co-authored-by: Mark Michelson <mmichels at redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi at redhat.com>
---
 ovn/northd/ovn-northd.c | 33 +++++++++++++++++++++
 ovn/ovn-nb.xml          | 11 +++++++
 tests/ovn.at            | 65 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 109 insertions(+)

diff --git a/ovn/northd/ovn-northd.c b/ovn/northd/ovn-northd.c
index ce382ac89..4929fb666 100644
--- a/ovn/northd/ovn-northd.c
+++ b/ovn/northd/ovn-northd.c
@@ -70,6 +70,8 @@ static const char *unixctl_path;
 static struct hmap macam = HMAP_INITIALIZER(&macam);
 static struct eth_addr mac_prefix;
 
+static bool controller_event_en;
+
 #define MAX_OVN_TAGS 4096
 
 /* Pipeline stages. */
@@ -3626,6 +3628,34 @@ build_pre_lb(struct ovn_datapath *od, struct hmap *lflows)
                 sset_add(&all_ips, ip_address);
             }
 
+            if (controller_event_en && !node->value[0]) {
+                struct ds match = DS_EMPTY_INITIALIZER;
+                char *action;
+
+                if (addr_family == AF_INET) {
+                    ds_put_format(&match, "ip4.dst == %s && %s",
+                                  ip_address, lb->protocol);
+                } else {
+                    ds_put_format(&match, "ip6.dst == %s && %s",
+                                  ip_address, lb->protocol);
+                }
+                if (port) {
+                    ds_put_format(&match, " && %s.dst == %u", lb->protocol,
+                                  port);
+                }
+                action = xasprintf("trigger_event(event = \"%s\", "
+                               "vip = \"%s\", protocol = \"%s\", "
+                               "load_balancer = \"" UUID_FMT "\");",
+                               event_to_string(OVN_EVENT_EMPTY_LB_BACKENDS),
+                               node->key, lb->protocol,
+                               UUID_ARGS(&lb->header_.uuid));
+                ovn_lflow_add(lflows, od, S_SWITCH_IN_PRE_LB, 120,
+                              ds_cstr(&match), action);
+                ds_destroy(&match);
+                free(action);
+                continue;
+            }
+
             free(ip_address);
 
             /* Ignore L4 port information in the key because fragmented packets
@@ -8115,6 +8145,9 @@ ovnnb_db_run(struct northd_context *ctx,
         smap_destroy(&options);
     }
 
+    controller_event_en = smap_get_bool(&nb->options,
+                                        "controller_event", false);
+
     cleanup_macam(&macam);
 }
 
diff --git a/ovn/ovn-nb.xml b/ovn/ovn-nb.xml
index 318379c1f..b0287563b 100644
--- a/ovn/ovn-nb.xml
+++ b/ovn/ovn-nb.xml
@@ -107,6 +107,17 @@
         Configure a given OUI to be used as prefix when L2 address is
         dynamically assigned, e.g. <code>00:11:22</code>
       </column>
+
+      <column name="options" key="controller_event" type='{"type": "boolean"}'>
+        Value set by the CMS to enable/disable ovn-controller event reporting.
+        Traffic into OVS can raise a 'controller' event that results in a
+        Controller_Event being written to the <ref table="Controller_Event"/>
+        table in SBDB. When the CMS has seen the event and taken appropriate
+        action, it can remove the correponding row in
+        <ref table="Controller_Event"/> table.
+        The intention is for a CMS to see the events and take some sort of
+        action. Please see the <ref table="Controller_Event"/> table in SBDB.
+      </column>
     </group>
 
     <group title="Connection Options">
diff --git a/tests/ovn.at b/tests/ovn.at
index e9ec715df..d2823d77a 100644
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -14344,3 +14344,68 @@ AT_CHECK([ovn-nbctl ls-add sw1], [1], [ignore],
 ])
 
 AT_CLEANUP
+
+AT_SETUP([ovn -- controller event])
+AT_KEYWORDS([ovn_controller_event])
+ovn_start
+
+# Create hypervisors hv[12].
+# Add vif1[12] to hv1, vif2[12] to hv2
+# Add all of the vifs to a single logical switch sw0.
+
+net_add n1
+ovn-nbctl ls-add sw0
+for i in 1 2; do
+    sim_add hv$i
+    as hv$i
+    ovs-vsctl add-br br-phys
+    ovn_attach n1 br-phys 192.168.0.$i
+
+    for j in 1 2; do
+        ovn-nbctl lsp-add sw0 sw0-p$i$j -- \
+                lsp-set-addresses sw0-p$i$j "00:00:00:00:00:$i$j 192.168.1.$i$j"
+
+        ovs-vsctl -- add-port br-int vif$i$j -- \
+                set interface vif$i$j \
+                external-ids:iface-id=sw0-p$i$j \
+                options:tx_pcap=hv$i/vif$i$j-tx.pcap \
+                options:rxq_pcap=hv$i/vif$i$j-rx.pcap \
+                ofport-request=$i$j
+    done
+done
+
+ovn-nbctl --wait=hv set NB_Global . options:controller_event=true
+ovn-nbctl lb-add lb0 192.168.1.100:80 ""
+ovn-nbctl ls-lb-add sw0 lb0
+uuid_lb=$(ovn-nbctl --bare --columns=_uuid find load_balancer name=lb0)
+
+OVN_POPULATE_ARP
+ovn-nbctl --timeout=3 --wait=hv sync
+ovn-sbctl lflow-list
+as hv1 ovs-ofctl dump-flows br-int
+
+packet="inport==\"sw0-p11\" && eth.src==00:00:00:00:00:11 && eth.dst==00:00:00:00:00:21 &&
+       ip4 && ip.ttl==64 && ip4.src==192.168.1.11 && ip4.dst==192.168.1.100 &&
+       tcp && tcp.src==10000 && tcp.dst==80"
+as hv1 ovs-appctl -t ovn-controller inject-pkt "$packet"
+
+ovn-sbctl list controller_event
+uuid=$(ovn-sbctl list controller_event | awk '/_uuid/{print $3}')
+AT_CHECK([ovn-sbctl get controller_event $uuid event_type], [0], [dnl
+empty_lb_backends
+])
+AT_CHECK([ovn-sbctl get controller_event $uuid event_info:vip], [0], [dnl
+"192.168.1.100:80"
+])
+AT_CHECK([ovn-sbctl get controller_event $uuid event_info:protocol], [0], [dnl
+tcp
+])
+AT_CHECK_UNQUOTED([ovn-sbctl get controller_event $uuid event_info:load_balancer], [0], [dnl
+"$uuid_lb"
+])
+AT_CHECK([ovn-sbctl get controller_event $uuid seq_num], [0], [dnl
+1
+])
+
+OVN_CLEANUP([hv1], [hv2])
+AT_CLEANUP
-- 
2.21.0



More information about the dev mailing list