[ovs-dev] [PATCH net-next] openvswitch: Make metadata_dst tunnel work in IP_TUNNEL_INFO_BRIDGE mode

Pravin Shelar pshelar at ovn.org
Sun Mar 24 18:46:41 UTC 2019


On Sun, Mar 24, 2019 at 12:03 AM wenxu <wenxu at ucloud.cn> wrote:
>
> On 2019/3/24 上午5:39, Pravin Shelar wrote:
> > On Sat, Mar 23, 2019 at 2:18 AM wenxu <wenxu at ucloud.cn> wrote:
> >> On 2019/3/23 下午3:50, Pravin Shelar wrote:
> >>
> >> On Thu, Mar 21, 2019 at 3:34 AM <wenxu at ucloud.cn> wrote:
> >>
> >> From: wenxu <wenxu at ucloud.cn>
> >>
> >> There is currently no support for the multicasti/broadcst aspects
> >> of VXLAN in ovs. In the datapath flow the tun_dst must specific.
> >> But in the IP_TUNNEL_INFO_BRIDGE mode the tun_dst can not be specific.
> >> And the packet can forward through the fdb of vxlan devcice. In
> >> this mode the broadcast/multicast packet can be sent through the
> >> following ways in ovs.
> >>
> >> ovs-vsctl add-port br0 vxlan -- set in vxlan type=vxlan \
> >>         options:key=1000 options:remote_ip=flow
> >> ovs-ofctl add-flow br0 in_port=LOCAL,dl_dst=ff:ff:ff:ff:ff:ff,\
> >>         action=output:vxlan
> >>
> >> bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.1 \
> >>         src_vni 1000 vni 1000 self
> >> bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.2 \
> >> src_vni 1000 vni 1000 self
> >>
> >> This would make datapath bit complicated, can you give example of such use-case?
> >>
> >> There is currently no support for the multicast/broadcast aspects
> >> of VXLAN in ovs. To get around the lack of multicast support, it is possible to
> >> pre-provision MAC to IP address mappings either manually or from a controller.
> >>
> >> With this patch we can achieve this through the fdb of the lower vxlan
> >> device.
> >>
> >> For example. three severs connects with vxlan.
> >> server1 IP 10.0.0.1 tunnel IP  172.168.0.1 vni 1000
> >> server2 IP 10.0.0.2 tunnel IP  172.168.0.2 vni 1000
> >> server3 IP 10.0.0.3 tunnel IP  172.168.0.3 vni 1000
> >>
> >> All the broadcast arp request from server1, can be send to vxlan_sys_4789
> >> in IP_TUNNEL_INFO_BRIDGE mode. Then the broadcast packet can send through
> >> the fdb table in the vxlan device as following:
> >>
> >> bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.1 \
> >>         src_vni 1000 vni 1000 self
> >> bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.2 \
> >> src_vni 1000 vni 1000 self
> >>
> >>
> >> Not any for multicast case. This patch make ovs vxlan tunnel using the fdb
> >> table of lower vxlan device.
> > Have you tried OVS mac learning?
> >
> The key point is that it makes ovs vxlan tunnel can make use of the fdb table of lower vxlan device.
>
> The fdb table can be configurable or mac learning from outside.
>
> For the broadcast example.  In the ovs, it can only achieve this through multiple output actions to simulate the broadcast.
>
> ovs-ofctl add-flow br0 in_port=server1,dl_dst=ff:ff:ff:ff:ff:ff,actions=set_field:172.168.0.1->tun_dst,output:vxlan,\
>
>     set_field:172.168.0.2->tun_dst,output:vxlan.
>
> But there are some limits for the number of output actions.
>
I was referring to mac-learning feature in OVS i.e. using learn
action. I wanted to see if there is something that you are not able to
do with OVS learn action.


More information about the dev mailing list