[ovs-dev] [PATCH ovn] ovn-controller: Fix the missing flows with monitor-all set to True
Dumitru Ceara
dceara at redhat.com
Wed Jul 15 20:04:17 UTC 2020
On 7/15/20 7:56 PM, numans at ovn.org wrote:
> From: Numan Siddique <numans at ovn.org>
>
> When the config ovn-monitor-all is set to True, then ovn-controller is not
> programming the flows completely when it binds the logical port of
> a logical switch until a full recompute is triggered.
>
> This issue was introduced by the commit in Fixes - which added incremental procesing
> for runtime data changes.
>
> This patch fixes this issue.
>
> Fixes: 3d096f833c4a("ovn-controller: Handle runtime data changes in flow output engine")
>
> Reported-by: Dumitru Ceara <dceara at redhat.com>
> Signed-off-by: Numan Siddique <numans at ovn.org>
> ---
> controller/binding.c | 17 ++++++--
> tests/ovn.at | 101 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 115 insertions(+), 3 deletions(-)
>
> diff --git a/controller/binding.c b/controller/binding.c
> index b2c388146d..8f6d68006e 100644
> --- a/controller/binding.c
> +++ b/controller/binding.c
> @@ -103,9 +103,20 @@ add_local_datapath__(struct ovsdb_idl_index *sbrec_datapath_binding_by_key,
> ld->localnet_port = NULL;
> ld->has_local_l3gateway = has_local_l3gateway;
>
> - if (tracked_datapaths &&
> - !tracked_binding_datapath_find(tracked_datapaths, datapath)) {
> - tracked_binding_datapath_create(datapath, true, tracked_datapaths);
> + if (tracked_datapaths) {
> + struct tracked_binding_datapath *tdp =
> + tracked_binding_datapath_find(tracked_datapaths, datapath);
> + if (!tdp) {
> + tracked_binding_datapath_create(datapath, true, tracked_datapaths);
> + } else {
> + /* Its possible that there is already an entry in tracked datapaths
Nit: s/Its/It's.
> + * for this 'datapath'. tracked_binding_datapath_lport_add() may
> + * have created it. Since the 'datapath' is added to the
> + * local datapaths, set the tdp->is_new to true so that the flows
Nit s/set the/set
Otherwise:
Acked-by: Dumitru Ceara <dceara at redhat.com>
Thanks,
Dumitru
> + * for this datapath are programmed properly.
> + * */
> + tdp->is_new = true;
> + }
> }
>
> if (depth >= 100) {
> diff --git a/tests/ovn.at b/tests/ovn.at
> index 24d93bc245..ba1a534e92 100644
> --- a/tests/ovn.at
> +++ b/tests/ovn.at
> @@ -20601,3 +20601,104 @@ OVS_WAIT_UNTIL([
>
> OVN_CLEANUP([hv1], [hv2])
> AT_CLEANUP
> +
> +AT_SETUP([ovn -- controller I-P handling with monitoring disabled])
> +AT_KEYWORDS([lb])
> +ovn_start
> +
> +net_add n1
> +
> +sim_add hv1
> +as hv1
> +ovs-vsctl add-br br-phys
> +ovn_attach n1 br-phys 192.168.0.1
> +
> +
> +sim_add hv2
> +as hv2
> +ovs-vsctl add-br br-phys
> +ovn_attach n1 br-phys 192.168.0.2
> +
> +ovn-nbctl ls-add sw0
> +
> +ovn-nbctl lsp-add sw0 sw0-p1
> +ovn-nbctl lsp-set-addresses sw0-p1 "50:54:00:00:00:03 10.0.0.3"
> +ovn-nbctl lsp-set-port-security sw0-p1 "50:54:00:00:00:03 10.0.0.3"
> +
> +ovn-nbctl lsp-add sw0 sw0-p2
> +ovn-nbctl lsp-set-addresses sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> +ovn-nbctl lsp-set-port-security sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> +
> +as hv1
> +ovs-vsctl -- add-port br-int hv1-vif1 -- \
> + set interface hv1-vif1 external-ids:iface-id=sw0-p1 \
> + options:tx_pcap=hv1/vif1-tx.pcap \
> + options:rxq_pcap=hv1/vif1-rx.pcap \
> + ofport-request=1
> +
> +OVS_WAIT_UNTIL([test x$(ovn-nbctl lsp-get-up sw0-p1) = xup])
> +
> +# Get the number of OF flows in hv1 and hv2
> +hv1_offlows=$(as hv1 ovs-ofctl dump-flows br-int | wc -l)
> +echo "hv1 flows : $hv1_offlows"
> +AT_CHECK([test $hv1_offlows -gt 0])
> +
> +as hv2
> +ovs-vsctl -- add-port br-int hv2-vif1 -- \
> + set interface hv2-vif1 external-ids:iface-id=sw0-p2 \
> + options:tx_pcap=hv2/vif1-tx.pcap \
> + options:rxq_pcap=hv2/vif1-rx.pcap \
> + ofport-request=1
> +
> +OVS_WAIT_UNTIL([test x$(ovn-nbctl lsp-get-up sw0-p2) = xup])
> +
> +hv2_offlows=$(as hv2 ovs-ofctl dump-flows br-int | wc -l)
> +echo "hv2 flows : $hv2_offlows"
> +AT_CHECK([test $hv2_offlows -gt 0])
> +
> +ovn-nbctl ls-del sw0
> +as hv1 ovs-vsctl del-port hv1-vif1
> +as hv2 ovs-vsctl del-port hv2-vif1
> +
> +as hv1 ovs-vsctl set open . external_ids:ovn-monitor-all=true
> +as hv2 ovs-vsctl set open . external_ids:ovn-monitor-all=true
> +
> +ovn-nbctl ls-add sw0
> +
> +ovn-nbctl lsp-add sw0 sw0-p1
> +ovn-nbctl lsp-set-addresses sw0-p1 "50:54:00:00:00:03 10.0.0.3"
> +ovn-nbctl lsp-set-port-security sw0-p1 "50:54:00:00:00:03 10.0.0.3"
> +
> +ovn-nbctl lsp-add sw0 sw0-p2
> +ovn-nbctl lsp-set-addresses sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> +ovn-nbctl lsp-set-port-security sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> +
> +as hv1
> +ovs-vsctl -- add-port br-int hv1-vif1 -- \
> + set interface hv1-vif1 external-ids:iface-id=sw0-p1 \
> + options:tx_pcap=hv1/vif1-tx.pcap \
> + options:rxq_pcap=hv1/vif1-rx.pcap \
> + ofport-request=1
> +
> +OVS_WAIT_UNTIL([test x$(ovn-nbctl lsp-get-up sw0-p1) = xup])
> +
> +# Get the number of OF flows in hv1 and hv2
> +hv1_offlows_mon=$(as hv1 ovs-ofctl dump-flows br-int | wc -l)
> +echo "hv1 flows after monitor-all=true : $hv1_offlows"
> +AT_CHECK([test "$hv1_offlows" = "$hv1_offlows_mon"])
> +
> +as hv2
> +ovs-vsctl -- add-port br-int hv2-vif1 -- \
> + set interface hv2-vif1 external-ids:iface-id=sw0-p2 \
> + options:tx_pcap=hv2/vif1-tx.pcap \
> + options:rxq_pcap=hv2/vif1-rx.pcap \
> + ofport-request=1
> +
> +OVS_WAIT_UNTIL([test x$(ovn-nbctl lsp-get-up sw0-p2) = xup])
> +
> +hv2_offlows_mon=$(as hv2 ovs-ofctl dump-flows br-int | wc -l)
> +echo "hv2 flows after monitor-all=true : $hv2_offlows"
> +AT_CHECK([test "$hv2_offlows" = "$hv2_offlows_mon"])
> +
> +OVN_CLEANUP([hv1], [hv2])
> +AT_CLEANUP
>
More information about the dev
mailing list