[ovs-dev] [PATCH ovn v10 8/8] tests: Enhance ovn-performance testing by adding gw router port.

Dumitru Ceara dceara at redhat.com
Tue Jun 9 10:49:34 UTC 2020


On 6/8/20 3:50 PM, numans at ovn.org wrote:
> From: Numan Siddique <numans at ovn.org>
> 
> This covers the scenario of setting up/deleting of BFD tunnels
> for HA.
> 
> Signed-off-by: Numan Siddique <numans at ovn.org>

Hi Numan,

Should this have a "Fixes" tag?

Thanks,
Dumitru

> ---
>  tests/ovn-performance.at | 104 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 104 insertions(+)
> 
> diff --git a/tests/ovn-performance.at b/tests/ovn-performance.at
> index a12757e18..2a15cb473 100644
> --- a/tests/ovn-performance.at
> +++ b/tests/ovn-performance.at
> @@ -239,6 +239,16 @@ for i in 1 2; do
>      ovn_attach n1 br-phys 192.168.0.$i
>  done
>  
> +for i in 1 2 3; do
> +    sim_add gw$i
> +    as gw$i
> +    ovs-vsctl add-br br-phys
> +    ovs-vsctl add-br br-ex
> +    ovs-vsctl set open . external_ids:ovn-bridge-mappings="public:br-ex"
> +    j=$((i + 2))
> +    ovn_attach n1 br-phys 192.168.0.$j
> +done
> +
>  # Wait for the tunnel ports to be created and up.
>  # Otherwise this may affect the lflow_run count.
>  
> @@ -399,6 +409,100 @@ OVN_CONTROLLER_EXPECT_NO_HIT(
>      [ovn-nbctl --wait=hv acl-add pg1 to-lport 1001 'outport == @pg1 && ip4.src == $pg1_ip4' allow]
>  )
>  
> +# Create a public logical switch and attach the router to it.
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv ls-add public]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-add public public-lr1]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-type public-lr1 router]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-addresses public-lr1 router]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-options public-lr1 router-port=lr1-public]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lrp-add lr1 lr1-public 00:00:20:20:12:13 172.168.0.100/24]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-add public ln-public]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-type ln-public localnet]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-addresses ln-public unknown]
> +)
> +
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2], [lflow_run],
> +    [ovn-nbctl --wait=hv lsp-set-options ln-public network_name=public]
> +)
> +
> +OVN_CONTROLLER_EXPECT_HIT_COND(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run], [=0 =0 >0 =0 =0],
> +    [ovn-nbctl --wait=hv lrp-set-gateway-chassis lr1-public gw1 30]
> +)
> +
> +# After this, BFD should be enabled from hv1 and hv2 to gw1.
> +# So there should be lflow_run hits in hv1, hv2, gw1 and gw2
> +OVN_CONTROLLER_EXPECT_HIT_COND(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run], [>0 >0 >0 >0 =0],
> +    [ovn-nbctl --wait=hv lrp-set-gateway-chassis lr1-public gw2 20]
> +)
> +
> +OVN_CONTROLLER_EXPECT_HIT(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run],
> +    [ovn-nbctl --wait=hv lrp-set-gateway-chassis lr1-public gw3 10]
> +)
> +
> +# Make gw2 master.
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run],
> +    [ovn-nbctl --wait=hv lrp-set-gateway-chassis lr1-public gw2 40]
> +)
> +
> +# Delete gw2 from gateway chassis
> +OVN_CONTROLLER_EXPECT_HIT(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run],
> +    [ovn-nbctl --wait=hv lrp-del-gateway-chassis lr1-public gw2]
> +)
> +
> +# Delete gw1 from gateway chassis
> +# After this, the BFD should be disabled entirely as gw3 is the
> +# only gateway chassis.
> +OVN_CONTROLLER_EXPECT_HIT_COND(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run],  [>0 >0 >0 =0 >0],
> +    [ovn-nbctl --wait=hv lrp-del-gateway-chassis lr1-public gw1]
> +)
> +
> +# Delete gw3 from gateway chassis. There should be no lflow_run.
> +OVN_CONTROLLER_EXPECT_NO_HIT(
> +    [hv1 hv2 gw1 gw2 gw3], [lflow_run],
> +    [ovn-nbctl --wait=hv lrp-del-gateway-chassis lr1-public gw3]
> +)
> +
>  for i in 1 2; do
>      j=$((i%2 + 1))
>      lp=lp$i
> 



More information about the dev mailing list