[ovs-dev] [PATCH ovn v2] ovn-northd: Add lflows to by pass the svc monitor packets from conntrack.

Maciej Jozefczyk mjozefcz at redhat.com
Thu Mar 12 12:51:26 UTC 2020


Looks good. I tested it on my env. The HC mechanism works fine. I also
verified it for more than one VIPs configured.

Acked-by: Maciej Jozefczyk <mjozefcz at redhat.com <dceara at redhat.com>>

Thanks,
Maciej

On Thu, Mar 12, 2020 at 1:39 PM Dumitru Ceara <dceara at redhat.com> wrote:

> On 3/12/20 11:28 AM, numans at ovn.org wrote:
> > From: Numan Siddique <numans at ovn.org>
> >
> > The commit [1] added lflows to by pass the service monitor health check
> > packets from conntrack. But it missed out adding in the ingress pre_acl
> > and egress pre_acl of logical switch pipeline.
> >
> > This patch adds these missing lflows. It also enhanced the system lb
> health
> > check tests to add the acls to test this scenario.
> >
> > [1] - bb9f2b9ce56c("ovn-northd: Consider load balancer active backends
> in router pipeline)
> > Fixes: bb9f2b9ce56c("ovn-northd: Consider load balancer active backends
> in router pipeline)
> >
> > Reported-by: Maciej Józefczyk <mjozefcz at redhat.com>
> > Signed-off-by: Numan Siddique <numans at ovn.org>
>
> Looks good to me.
>
> Acked-by: Dumitru Ceara <dceara at redhat.com>
>
> Thanks,
> Dumitru
>
> > ---
> > v1 -> v2
> > -----
> >   * Addressed the review comments from Dumitru
> >      - Added the ACLs in the unit test too.
> >
> >  northd/ovn-northd.8.xml | 22 +++++++++++++++++++++-
> >  northd/ovn-northd.c     | 15 ++++++++++++++-
> >  tests/ovn.at            | 22 ++++++++++++++++++++++
> >  tests/system-ovn.at     | 22 ++++++++++++++++++++++
> >  4 files changed, 79 insertions(+), 2 deletions(-)
> >
> > diff --git a/northd/ovn-northd.8.xml b/northd/ovn-northd.8.xml
> > index b6cfa3e90..9b44720d1 100644
> > --- a/northd/ovn-northd.8.xml
> > +++ b/northd/ovn-northd.8.xml
> > @@ -293,6 +293,16 @@
> >        priority-110 flow is added to skip over stateful ACLs.
> >      </p>
> >
> > +    <p>
> > +      This table also has a priority-110 flow with the match
> > +      <code>eth.dst == <var>E</var></code> for all logical switch
> > +      datapaths to move traffic to the next table. Where <var>E</var>
> > +      is the service monitor mac defined in the
> > +      <ref column="options:svc_monitor_mac" table="NB_Global"
> > +      db="OVN_Northbound"/> colum of <ref table="NB_Global"
> > +      db="OVN_Northbound"/> table.
> > +    </p>
> > +
> >      <h3>Ingress Table 4: Pre-LB</h3>
> >
> >      <p>
> > @@ -320,7 +330,7 @@
> >
> >      <p>
> >        This table also has a priority-110 flow with the match
> > -      <code>eth.src == <var>E</var></code> for all logical switch
> > +      <code>eth.dst == <var>E</var></code> for all logical switch
> >        datapaths to move traffic to the next table. Where <var>E</var>
> >        is the service monitor mac defined in the
> >        <ref column="options:svc_monitor_mac" table="NB_Global"
> > @@ -1295,6 +1305,16 @@ output;
> >       <code>to-lport</code> traffic.
> >      </p>
> >
> > +    <p>
> > +      This table also has a priority-110 flow with the match
> > +      <code>eth.src == <var>E</var></code> for all logical switch
> > +      datapaths to move traffic to the next table. Where <var>E</var>
> > +      is the service monitor mac defined in the
> > +      <ref column="options:svc_monitor_mac" table="NB_Global"
> > +      db="OVN_Northbound"/> colum of <ref table="NB_Global"
> > +      db="OVN_Northbound"/> table.
> > +    </p>
> > +
> >      <h3>Egress Table 2: Pre-stateful</h3>
> >
> >      <p>
> > diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c
> > index d42a9892a..52dca48c6 100644
> > --- a/northd/ovn-northd.c
> > +++ b/northd/ovn-northd.c
> > @@ -4605,6 +4605,16 @@ build_pre_acls(struct ovn_datapath *od, struct
> hmap *lflows)
> >      ovn_lflow_add(lflows, od, S_SWITCH_IN_PRE_ACL, 0, "1", "next;");
> >      ovn_lflow_add(lflows, od, S_SWITCH_OUT_PRE_ACL, 0, "1", "next;");
> >
> > +    char *svc_check_match = xasprintf("eth.dst == %s", svc_monitor_mac);
> > +    ovn_lflow_add(lflows, od, S_SWITCH_IN_PRE_ACL, 110, svc_check_match,
> > +                  "next;");
> > +    free(svc_check_match);
> > +
> > +    svc_check_match = xasprintf("eth.src == %s", svc_monitor_mac);
> > +    ovn_lflow_add(lflows, od, S_SWITCH_OUT_PRE_ACL, 110,
> svc_check_match,
> > +                  "next;");
> > +    free(svc_check_match);
> > +
> >      /* If there are any stateful ACL rules in this datapath, we must
> >       * send all IP packets through the conntrack action, which handles
> >       * defragmentation, in order to match L4 headers. */
> > @@ -4788,9 +4798,12 @@ build_pre_lb(struct ovn_datapath *od, struct hmap
> *lflows,
> >                    "next;");
> >
> >      /* Do not send service monitor packets to conntrack. */
> > -    char *svc_check_match = xasprintf("eth.src == %s", svc_monitor_mac);
> > +    char *svc_check_match = xasprintf("eth.dst == %s", svc_monitor_mac);
> >      ovn_lflow_add(lflows, od, S_SWITCH_IN_PRE_LB, 110,
> >                    svc_check_match, "next;");
> > +    free(svc_check_match);
> > +
> > +    svc_check_match = xasprintf("eth.src == %s", svc_monitor_mac);
> >      ovn_lflow_add(lflows, od, S_SWITCH_OUT_PRE_LB, 110,
> >                    svc_check_match, "next;");
> >      free(svc_check_match);
> > diff --git a/tests/ovn.at b/tests/ovn.at
> > index 8de4b5ceb..8cdbad743 100644
> > --- a/tests/ovn.at
> > +++ b/tests/ovn.at
> > @@ -17739,12 +17739,34 @@ ovn-nbctl lsp-set-port-security sw0-p1
> "50:54:00:00:00:03 10.0.0.3"
> >  ovn-nbctl lsp-set-addresses sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> >  ovn-nbctl lsp-set-port-security sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> >
> > +# Create port group and ACLs for sw0 ports.
> > +ovn-nbctl pg-add pg0_drop sw0-p1 sw0-p2
> > +ovn-nbctl acl-add pg0_drop from-lport 1001 "inport == @pg0_drop && ip"
> drop
> > +ovn-nbctl acl-add pg0_drop to-lport 1001 "outport == @pg0_drop && ip"
> drop
> > +
> > +ovn-nbctl pg-add pg0 sw0-p1 sw0-p2
> > +ovn-nbctl acl-add pg0 from-lport 1002 "inport == @pg0 && ip4"
> allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && icmp4" allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && tcp && tcp.dst == 80" allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && udp && udp.dst == 80" allow-related
> > +
> >  # Create the second logical switch with one port
> >  ovn-nbctl ls-add sw1
> >  ovn-nbctl lsp-add sw1 sw1-p1
> >  ovn-nbctl lsp-set-addresses sw1-p1 "40:54:00:00:00:03 20.0.0.3"
> >  ovn-nbctl lsp-set-port-security sw1-p1 "40:54:00:00:00:03 20.0.0.3"
> >
> > +# Create port group and ACLs for sw1 ports.
> > +ovn-nbctl pg-add pg1_drop sw1-p1
> > +ovn-nbctl acl-add pg1_drop from-lport 1001 "inport == @pg1_drop && ip"
> drop
> > +ovn-nbctl acl-add pg1_drop to-lport 1001 "outport == @pg1_drop && ip"
> drop
> > +
> > +ovn-nbctl pg-add pg1 sw1-p1
> > +ovn-nbctl acl-add pg1 from-lport 1002 "inport == @pg1 && ip4"
> allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && icmp4" allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && tcp && tcp.dst == 80" allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && udp && udp.dst == 80" allow-related
> > +
> >  # Create a logical router and attach both logical switches
> >  ovn-nbctl lr-add lr0
> >  ovn-nbctl lrp-add lr0 lr0-sw0 00:00:00:00:ff:01 10.0.0.1/24
> > diff --git a/tests/system-ovn.at b/tests/system-ovn.at
> > index 9ed3df754..3b3379840 100644
> > --- a/tests/system-ovn.at
> > +++ b/tests/system-ovn.at
> > @@ -3314,12 +3314,34 @@ ovn-nbctl lsp-add sw0 sw0-p2
> >  ovn-nbctl lsp-set-addresses sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> >  ovn-nbctl lsp-set-port-security sw0-p2 "50:54:00:00:00:04 10.0.0.4"
> >
> > +# Create port group and ACLs for sw0 ports.
> > +ovn-nbctl pg-add pg0_drop sw0-p1 sw0-p2
> > +ovn-nbctl acl-add pg0_drop from-lport 1001 "inport == @pg0_drop && ip"
> drop
> > +ovn-nbctl acl-add pg0_drop to-lport 1001 "outport == @pg0_drop && ip"
> drop
> > +
> > +ovn-nbctl pg-add pg0 sw0-p1 sw0-p2
> > +ovn-nbctl acl-add pg0 from-lport 1002 "inport == @pg0 && ip4"
> allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && icmp4" allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && tcp && tcp.dst == 80" allow-related
> > +ovn-nbctl acl-add pg0 to-lport 1002 "outport == @pg0 && ip4 && ip4.src
> == 0.0.0.0/0 && udp && udp.dst == 80" allow-related
> > +
> >  # Create the second logical switch with one port
> >  ovn-nbctl ls-add sw1
> >  ovn-nbctl lsp-add sw1 sw1-p1
> >  ovn-nbctl lsp-set-addresses sw1-p1 "40:54:00:00:00:03 20.0.0.3"
> >  ovn-nbctl lsp-set-port-security sw1-p1 "40:54:00:00:00:03 20.0.0.3"
> >
> > +# Create port group and ACLs for sw1 ports.
> > +ovn-nbctl pg-add pg1_drop sw1-p1
> > +ovn-nbctl acl-add pg1_drop from-lport 1001 "inport == @pg1_drop && ip"
> drop
> > +ovn-nbctl acl-add pg1_drop to-lport 1001 "outport == @pg1_drop && ip"
> drop
> > +
> > +ovn-nbctl pg-add pg1 sw1-p1
> > +ovn-nbctl acl-add pg1 from-lport 1002 "inport == @pg1 && ip4"
> allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && icmp4" allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && tcp && tcp.dst == 80" allow-related
> > +ovn-nbctl acl-add pg1 to-lport 1002 "outport == @pg1 && ip4 && ip4.src
> == 0.0.0.0/0 && udp && udp.dst == 80" allow-related
> > +
> >  # Create a logical router and attach both logical switches
> >  ovn-nbctl lr-add lr0
> >  ovn-nbctl lrp-add lr0 lr0-sw0 00:00:00:00:ff:01 10.0.0.1/24
> >
>
> _______________________________________________
> dev mailing list
> dev at openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>


-- 
Best regards,
Maciej Józefczyk


More information about the dev mailing list