[ovs-dev] [PATCH ovn v6 0/9] Incremental processing improvements.
numans at ovn.org
numans at ovn.org
Sat May 16 17:55:39 UTC 2020
From: Numan Siddique <numans at ovn.org>
This patch series handles port binding, datapath binding, ovs interface changes,
runtime data changes, sb chassis changes incrementally.
(These patches can also be found here -
https://github.com/numansiddique/ovn/tree/IP_improvements_v5)
Below are the results of some testing I did with ovn-fake-multinode
setup
Test setup
------
1. ovn-central fake node running OVN dbs and 2 compute nodes running
ovn-controller.
2. Before running the tests, used an existing OVN db with the below
resources
No of logical switches - 53
No of logical ports - 1256
No of logical routers - 9
No of logical router ports - 56
No of port groups - 152
No of logical flows - 45447
Port bindings on compute-1 - 19
Port bindings on compute-2 - 18
No of OF flows on compute-1 - 84996
No of OF flows on compute-2 - 84901
3. The test does the following
- Creates 2 logical switches (one for each compute node) and connect to a
logical router for each compute node.
- 100 logical ports are created (50 per lswitch), a simple ACL is added and the address
set is created for each port.
- Each port is bound on the respective compute node and the test
pings the IP of the port (from another port belonging to the same
lswitch created earlier).
Below are the results with OVN master
+---------------------------------------------------------------------------------------------------------+
| Response Times (sec) |
+----------------------------------+-------+--------+--------+--------+--------+--------+---------+-------+
| action | min | median | 90%ile | 95%ile | max | avg | success | count |
+----------------------------------+-------+--------+--------+--------+--------+--------+---------+-------+
| ovn.create_or_update_address_set | 0.491 | 0.519 | 0.542 | 0.548 | 0.558 | 0.521 | 100.0% | 100 |
| ovn.create_or_update_port_group | 0.0 | 0.0 | 0.0 | 0.0 | 0.001 | 0.0 | 100.0% | 100 |
| ovn.create_port_group_acls | 0.966 | 1.037 | 1.065 | 1.069 | 1.07 | 1.037 | 50.0% | 100 |
| ovn_network.bind_port | 1.242 | 1.341 | 1.397 | 1.409 | 1.443 | 1.348 | 100.0% | 100 |
| ovn.bind_ovs_vm | 0.413 | 0.469 | 0.49 | 0.494 | 0.523 | 0.469 | 100.0% | 100 |
| ovn.bind_internal_vm | 0.804 | 0.875 | 0.921 | 0.935 | 0.95 | 0.88 | 100.0% | 100 |
| ovn_network.wait_port_ping | 6.695 | 7.788 | 7.903 | 11.63 | 16.124 | 7.997 | 100.0% | 100 |
| total | 9.271 | 10.318 | 11.269 | 14.047 | 18.509 | 10.871 | 100.0% | 100 |
+----------------------------------+-------+--------+--------+--------+--------+--------+---------+-------+
Load duration: 1087.5742933750153
Full duration: 1089.151035308838
Below are the results with these patches
+-------------------------------------------------------------------------------------------------------+
| Response Times (sec) |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
| action | min | median | 90%ile | 95%ile | max | avg | success | count |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
| ovn.create_or_update_address_set | 0.484 | 0.506 | 0.53 | 0.536 | 0.551 | 0.509 | 100.0% | 100 |
| ovn.create_or_update_port_group | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 100.0% | 100 |
| ovn.create_port_group_acls | 0.966 | 1.006 | 1.032 | 1.036 | 1.059 | 1.006 | 50.0% | 100 |
| ovn_network.bind_port | 1.255 | 1.352 | 1.421 | 1.444 | 1.516 | 1.352 | 100.0% | 100 |
| ovn.bind_ovs_vm | 0.411 | 0.455 | 0.472 | 0.476 | 0.5 | 0.456 | 100.0% | 100 |
| ovn.bind_internal_vm | 0.806 | 0.893 | 0.968 | 0.989 | 1.043 | 0.896 | 100.0% | 100 |
| ovn_network.wait_port_ping | 0.226 | 0.253 | 0.325 | 0.329 | 0.347 | 0.267 | 100.0% | 100 |
| total | 2.517 | 3.137 | 3.718 | 3.749 | 3.797 | 3.135 | 100.0% | 100 |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
Load duration: 313.99292826652527
Full duration: 315.29931354522705
I ran same tests but with 1000 lports and below are the results with
these patches
+-------------------------------------------------------------------------------------------------------+
| Response Times (sec) |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
| action | min | median | 90%ile | 95%ile | max | avg | success | count |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
| ovn.create_or_update_address_set | 0.483 | 0.555 | 0.6 | 0.615 | 0.661 | 0.555 | 100.0% | 1000 |
| ovn.create_or_update_port_group | 0.0 | 0.0 | 0.0 | 0.0 | 0.002 | 0.0 | 100.0% | 1000 |
| ovn.create_port_group_acls | 0.973 | 1.101 | 1.176 | 1.195 | 1.271 | 1.097 | 50.0% | 1000 |
| ovn_network.bind_port | 1.239 | 1.371 | 1.444 | 1.47 | 1.557 | 1.373 | 100.0% | 1000 |
| ovn.bind_ovs_vm | 0.409 | 0.482 | 0.522 | 0.541 | 0.597 | 0.486 | 100.0% | 1000 |
| ovn.bind_internal_vm | 0.784 | 0.882 | 0.945 | 0.968 | 1.063 | 0.887 | 100.0% | 1000 |
| ovn_network.wait_port_ping | 0.218 | 0.251 | 0.313 | 0.324 | 0.395 | 0.262 | 100.0% | 1000 |
| total | 2.465 | 3.251 | 3.956 | 4.016 | 4.226 | 3.274 | 100.0% | 1000 |
+----------------------------------+-------+--------+--------+--------+-------+-------+---------+-------+
Load duration: 3279.292845249176
Full duration: 3280.6857619285583
v5 -> v6
----
* Addressed the review comments from Dumitru.
* Patch 1 and Patch 2 are significantly changed due to
further refactoring.
v4 -> v5
----
* Applied patch 1 of v4 to master.
* Addressed the review comments from Han for patch 2.
* Rebased to latest master.
v3 -> v4
----
* A small fix in patch 3 when binding the port for ovs interface
change.
* Rebased to latest master.
v2 -> v3
----
* Added back the patch 5 and 6 and added 4 more patches. So totally
totally 10 patches in the series
* Handling the runtime data changes in flow computation.
* Handling sbrec_chassis changes.
v1 -> v2
------
* Addressed the review comments from Han in patch 1, 2 and 3.
* Removed patch 5 and 6 from the series. As per the comments
from Han, we should handle runtime data changes in flow output
engine. But the patch 6 of the series had added a no-op
handler. So removed these 2 patches until those are addressed.
RFC v2 -> v1
---------
* Fixed the 2 failing test cases.
* Updated the commit messages.
RFC v1 -> RFC v2
---------
* Added 2 new patches
* Patch 5 (ofctrl_check_and_add_flow) was submitted earlier too and
the previous discussion is here - https://patchwork.ozlabs.org/patch/1202417/
* Patch 6 handles I-P for ct_zone and OVS interface changes in
flow_output_run stage.
Numan Siddique (6):
Refactor binding_run()to take two context argument - binding_ctx_in
and binding_ctx_out.
ovn-controller: Refactor binding.c
ovn-controller: I-P for port binding in runtime_data stage
ovn-controller: I-P for datapath binding
ofctrl_check_and_add_flow: Replace the actions of an existing flow if
actions have changed.
ovn-controller: I-P for ct zone and OV
Numan Siddique (8):
ovn-controller: Store the local port bindings in the runtime data I-P
state.
ovn-controller: I-P for SB port binding and OVS interface in
runtime_data.
ovn-controller: I-P for datapath binding
ofctrl: Replace the actions of an existing flow if actions have
changed.
ovn-controller: I-P for ct zone and OVS interface changes in flow
output stage.
I-P engine: Provide the option for an engine to store changed data
ovn-controller: Handle runtime data changes in flow output engine
ovn-controller: Handle sbrec_chassis changes incrementally.
Venkata Anil (1):
ovn-controller: Use the tracked runtime data changes for flow
calculation.
controller/binding.c | 1847 +++++++++++++++++++++++++++--------
controller/binding.h | 62 +-
controller/lflow.c | 82 +-
controller/lflow.h | 14 +-
controller/ofctrl.c | 34 +-
controller/ovn-controller.c | 430 ++++++--
controller/physical.c | 51 +
controller/physical.h | 8 +-
lib/inc-proc-eng.c | 30 +-
lib/inc-proc-eng.h | 20 +
tests/ovn-performance.at | 51 +-
tests/ovn.at | 41 +
12 files changed, 2139 insertions(+), 531 deletions(-)
--
2.26.2
More information about the dev
mailing list