[ovs-dev] [PATCH ovn 2/5] ovn-northd: Add support for CoPP.
Lorenzo Bianconi
lorenzo.bianconi at redhat.com
Thu Apr 29 17:04:15 UTC 2021
From: Dumitru Ceara <dceara at redhat.com>
Add new 'Copp' (Control plane protection) table to OVN Northbound DB:
- this stores mappings between control plane protocol names and meters
that should be used to rate limit controller-destined traffic for
those protocols.
Add new 'copp' columns to the following OVN Northbound DB tables:
- Logical_Switch
- Logical_Router
For now, no control plane protection policy is installed for any of
the existing flows that punt packets to ovn-controller. This will be
added in follow-up patches.
Add CLI commands in 'ovn-nbctl' to allow the user to manage Control
Plane Protection Policies at different levels (logical switch,
logical router).
Co-authored-by: Lorenzo Bianconi <lorenzo.bianconi at redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi at redhat.com>
Signed-off-by: Dumitru Ceara <dceara at redhat.com>
---
lib/automake.mk | 2 +
lib/copp.c | 144 ++++++++++++++++++++++++++++++++
lib/copp.h | 60 ++++++++++++++
northd/ovn-northd.c | 44 +++++++---
ovn-nb.ovsschema | 18 +++-
ovn-nb.xml | 78 ++++++++++++++++++
tests/ovn-northd.at | 49 +++++++++++
utilities/ovn-nbctl.8.xml | 116 ++++++++++++++++++++++++++
utilities/ovn-nbctl.c | 167 ++++++++++++++++++++++++++++++++++++++
9 files changed, 665 insertions(+), 13 deletions(-)
create mode 100644 lib/copp.c
create mode 100644 lib/copp.h
diff --git a/lib/automake.mk b/lib/automake.mk
index 781be2109..20e296fff 100644
--- a/lib/automake.mk
+++ b/lib/automake.mk
@@ -9,6 +9,8 @@ lib_libovn_la_SOURCES = \
lib/actions.c \
lib/chassis-index.c \
lib/chassis-index.h \
+ lib/copp.c \
+ lib/copp.h \
lib/ovn-dirs.h \
lib/expr.c \
lib/extend-table.h \
diff --git a/lib/copp.c b/lib/copp.c
new file mode 100644
index 000000000..ac53a1094
--- /dev/null
+++ b/lib/copp.c
@@ -0,0 +1,144 @@
+/* Copyright (c) 2021, Red Hat, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <config.h>
+#include <stdlib.h>
+
+#include "openvswitch/shash.h"
+#include "db-ctl-base.h"
+#include "smap.h"
+#include "lib/ovn-nb-idl.h"
+#include "lib/copp.h"
+
+static char *copp_proto_names[COPP_PROTO_MAX] = {
+ [COPP_ARP] = "arp",
+ [COPP_ARP_RESOLVE] = "arp-resolve",
+ [COPP_DHCPV4_OPTS] = "dhcpv4-opts",
+ [COPP_DHCPV6_OPTS] = "dhcpv6-opts",
+ [COPP_DNS] = "dns",
+ [COPP_EVENT_ELB] = "event-elb",
+ [COPP_ICMP4_ERR] = "icmp4-error",
+ [COPP_ICMP6_ERR] = "icmp6-error",
+ [COPP_IGMP] = "igmp",
+ [COPP_ND_NA] = "nd-na",
+ [COPP_ND_NS] = "nd-ns",
+ [COPP_ND_NS_RESOLVE] = "nd-ns-resolve",
+ [COPP_ND_RA_OPTS] = "nd-ra-opts",
+ [COPP_TCP_RESET] = "tcp-reset",
+ [COPP_BFD] = "bfd",
+};
+
+const char *
+copp_proto_get(enum copp_proto proto)
+{
+ if (proto >= COPP_PROTO_MAX) {
+ return "<Invalid control protocol ID>";
+ }
+ return copp_proto_names[proto];
+}
+
+const char *
+copp_meter_get(enum copp_proto proto, const struct nbrec_copp *copp,
+ const struct shash *meter_groups)
+{
+ if (!copp || proto >= COPP_PROTO_MAX) {
+ return NULL;
+ }
+
+ const char *meter = smap_get(&copp->meters, copp_proto_names[proto]);
+
+ if (meter && shash_find(meter_groups, meter)) {
+ return meter;
+ }
+
+ return NULL;
+}
+
+void
+copp_list(struct ctl_context *ctx, const struct nbrec_copp *copp)
+{
+ if (!copp) {
+ return;
+ }
+
+ struct smap_node *node;
+
+ SMAP_FOR_EACH (node, &copp->meters) {
+ ds_put_format(&ctx->output, "%s: %s\n", node->key, node->value);
+ }
+}
+
+const struct nbrec_copp *
+copp_add_meter(struct ctl_context *ctx, const struct nbrec_copp *copp,
+ const char *proto_name, const char *meter)
+{
+ if (!copp) {
+ copp = nbrec_copp_insert(ctx->txn);
+ }
+
+ struct smap meters;
+ smap_init(&meters);
+ smap_clone(&meters, &copp->meters);
+ smap_replace(&meters, proto_name, meter);
+ nbrec_copp_set_meters(copp, &meters);
+ smap_destroy(&meters);
+
+ return copp;
+}
+
+void
+copp_del_meter(const struct nbrec_copp *copp, const char *proto_name)
+{
+ if (!copp) {
+ return;
+ }
+
+ if (proto_name) {
+ if (smap_get(&copp->meters, proto_name)) {
+ struct smap meters;
+ smap_init(&meters);
+ smap_clone(&meters, &copp->meters);
+ smap_remove(&meters, proto_name);
+ nbrec_copp_set_meters(copp, &meters);
+ smap_destroy(&meters);
+ }
+ } else {
+ nbrec_copp_delete(copp);
+ }
+}
+
+char *
+copp_proto_validate(const char *proto_name)
+{
+ for (size_t i = COPP_PROTO_FIRST; i < COPP_PROTO_MAX; i++) {
+ if (!strcmp(proto_name, copp_proto_get(i))) {
+ return NULL;
+ }
+ }
+
+ struct ds usage = DS_EMPTY_INITIALIZER;
+
+ ds_put_cstr(&usage, "Invalid control protocol. Allowed values: ");
+ for (size_t i = COPP_PROTO_FIRST; i < COPP_PROTO_MAX; i++) {
+ ds_put_format(&usage, "%s, ", copp_proto_get(i));
+ }
+ ds_chomp(&usage, ' ');
+ ds_chomp(&usage, ',');
+ ds_put_cstr(&usage, ".");
+
+ char *usage_str = xstrdup(ds_cstr(&usage));
+ ds_destroy(&usage);
+ return usage_str;
+}
diff --git a/lib/copp.h b/lib/copp.h
new file mode 100644
index 000000000..82581e7e4
--- /dev/null
+++ b/lib/copp.h
@@ -0,0 +1,60 @@
+/* Copyright (c) 2021, Red Hat, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef OVN_COPP_H
+#define OVN_COPP_H 1
+
+/*
+ * Control plane protection - metered actions.
+ */
+enum copp_proto {
+ COPP_PROTO_FIRST,
+ COPP_ARP = COPP_PROTO_FIRST,
+ COPP_ARP_RESOLVE,
+ COPP_DHCPV4_OPTS,
+ COPP_DHCPV6_OPTS,
+ COPP_DNS,
+ COPP_EVENT_ELB,
+ COPP_ICMP4_ERR,
+ COPP_ICMP6_ERR,
+ COPP_IGMP,
+ COPP_ND_NA,
+ COPP_ND_NS,
+ COPP_ND_NS_RESOLVE,
+ COPP_ND_RA_OPTS,
+ COPP_TCP_RESET,
+ COPP_BFD,
+ COPP_PROTO_MAX,
+ COPP_PROTO_INVALID = COPP_PROTO_MAX,
+};
+
+struct nbrec_copp;
+struct ctl_context;
+
+const char *copp_proto_get(enum copp_proto);
+
+const char *copp_meter_get(enum copp_proto proto,
+ const struct nbrec_copp *copp,
+ const struct shash *meter_groups);
+
+void copp_list(struct ctl_context *ctx, const struct nbrec_copp *copp);
+const struct nbrec_copp *
+copp_add_meter(struct ctl_context *ctx, const struct nbrec_copp *copp,
+ const char *proto_name, const char *meter);
+void
+copp_del_meter(const struct nbrec_copp *copp, const char *proto_name);
+char * copp_proto_validate(const char *proto_name);
+
+#endif /* lib/copp.h */
diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c
index 94fae5648..2e9c7de22 100644
--- a/northd/ovn-northd.c
+++ b/northd/ovn-northd.c
@@ -32,6 +32,7 @@
#include "ovn/lex.h"
#include "lib/chassis-index.h"
#include "lib/ip-mcast-index.h"
+#include "lib/copp.h"
#include "lib/mcast-group-index.h"
#include "lib/ovn-l7.h"
#include "lib/ovn-nb-idl.h"
@@ -4018,6 +4019,7 @@ struct ovn_lflow {
char *match;
char *actions;
char *stage_hint;
+ char *ctrl_meter;
const char *where;
};
@@ -4051,14 +4053,15 @@ ovn_lflow_equal(const struct ovn_lflow *a, const struct ovn_lflow *b)
&& a->stage == b->stage
&& a->priority == b->priority
&& !strcmp(a->match, b->match)
- && !strcmp(a->actions, b->actions));
+ && !strcmp(a->actions, b->actions)
+ && nullable_string_is_equal(a->ctrl_meter, b->ctrl_meter));
}
static void
ovn_lflow_init(struct ovn_lflow *lflow, struct ovn_datapath *od,
enum ovn_stage stage, uint16_t priority,
- char *match, char *actions, char *stage_hint,
- const char *where)
+ char *match, char *actions, char *ctrl_meter,
+ char *stage_hint, const char *where)
{
hmapx_init(&lflow->od_group);
lflow->od = od;
@@ -4067,6 +4070,7 @@ ovn_lflow_init(struct ovn_lflow *lflow, struct ovn_datapath *od,
lflow->match = match;
lflow->actions = actions;
lflow->stage_hint = stage_hint;
+ lflow->ctrl_meter = ctrl_meter;
lflow->where = where;
}
@@ -4107,6 +4111,7 @@ static void
ovn_lflow_add_at(struct hmap *lflow_map, struct ovn_datapath *od,
enum ovn_stage stage, uint16_t priority,
const char *match, const char *actions, bool shared,
+ const char *ctrl_meter,
const struct ovsdb_idl_row *stage_hint, const char *where)
{
ovs_assert(ovn_stage_to_datapath_type(stage) == ovn_datapath_get_type(od));
@@ -4120,6 +4125,7 @@ ovn_lflow_add_at(struct hmap *lflow_map, struct ovn_datapath *od,
* one datapath in a group, so it could be hashed correctly. */
ovn_lflow_init(lflow, NULL, stage, priority,
xstrdup(match), xstrdup(actions),
+ nullable_xstrdup(ctrl_meter),
ovn_lflow_hint(stage_hint), where);
hash = ovn_lflow_hash(lflow);
@@ -4134,14 +4140,24 @@ ovn_lflow_add_at(struct hmap *lflow_map, struct ovn_datapath *od,
}
/* Adds a row with the specified contents to the Logical_Flow table. */
+#define ovn_lflow_add_with_hint__(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, \
+ ACTIONS, CTRL_METER, STAGE_HINT) \
+ ovn_lflow_add_at(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, true, \
+ CTRL_METER, STAGE_HINT, OVS_SOURCE_LOCATOR)
+
#define ovn_lflow_add_with_hint(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, \
ACTIONS, STAGE_HINT) \
- ovn_lflow_add_at(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, true, \
- STAGE_HINT, OVS_SOURCE_LOCATOR)
+ ovn_lflow_add_with_hint__(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, \
+ ACTIONS, NULL, STAGE_HINT)
#define ovn_lflow_add(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS) \
ovn_lflow_add_at(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, true, \
- NULL, OVS_SOURCE_LOCATOR)
+ NULL, NULL, OVS_SOURCE_LOCATOR)
+
+#define ovn_lflow_add_ctrl(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, \
+ CTRL_METER) \
+ ovn_lflow_add_with_hint__(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, \
+ ACTIONS, CTRL_METER, NULL)
/* Adds a row with the specified contents to the Logical_Flow table.
* Combining of this logical flow with already existing ones, e.g., by using
@@ -4156,21 +4172,22 @@ ovn_lflow_add_at(struct hmap *lflow_map, struct ovn_datapath *od,
#define ovn_lflow_add_unique_with_hint(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, \
ACTIONS, STAGE_HINT) \
ovn_lflow_add_at(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, false, \
- STAGE_HINT, OVS_SOURCE_LOCATOR)
+ NULL, STAGE_HINT, OVS_SOURCE_LOCATOR)
#define ovn_lflow_add_unique(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS) \
ovn_lflow_add_at(LFLOW_MAP, OD, STAGE, PRIORITY, MATCH, ACTIONS, false, \
- NULL, OVS_SOURCE_LOCATOR)
+ NULL, NULL, OVS_SOURCE_LOCATOR)
static struct ovn_lflow *
ovn_lflow_find(struct hmap *lflows, struct ovn_datapath *od,
enum ovn_stage stage, uint16_t priority,
- const char *match, const char *actions, uint32_t hash)
+ const char *match, const char *actions, const char *ctrl_meter,
+ uint32_t hash)
{
struct ovn_lflow target;
ovn_lflow_init(&target, od, stage, priority,
CONST_CAST(char *, match), CONST_CAST(char *, actions),
- NULL, NULL);
+ CONST_CAST(char *, ctrl_meter), NULL, NULL);
return ovn_lflow_find_by_lflow(lflows, &target, hash);
}
@@ -4186,6 +4203,7 @@ ovn_lflow_destroy(struct hmap *lflows, struct ovn_lflow *lflow)
free(lflow->match);
free(lflow->actions);
free(lflow->stage_hint);
+ free(lflow->ctrl_meter);
free(lflow);
}
}
@@ -12333,7 +12351,8 @@ build_lflows(struct northd_context *ctx, struct hmap *datapaths,
lflow = ovn_lflow_find(
&lflows, logical_datapath_od,
ovn_stage_build(dp_type, pipeline, sbflow->table_id),
- sbflow->priority, sbflow->match, sbflow->actions, sbflow->hash);
+ sbflow->priority, sbflow->match, sbflow->actions,
+ sbflow->controller_meter, sbflow->hash);
if (lflow) {
/* This is a valid lflow. Checking if the datapath group needs
* updates. */
@@ -12378,6 +12397,7 @@ build_lflows(struct northd_context *ctx, struct hmap *datapaths,
sbrec_logical_flow_set_priority(sbflow, lflow->priority);
sbrec_logical_flow_set_match(sbflow, lflow->match);
sbrec_logical_flow_set_actions(sbflow, lflow->actions);
+ sbrec_logical_flow_set_controller_meter(sbflow, lflow->ctrl_meter);
/* Trim the source locator lflow->where, which looks something like
* "ovn/northd/ovn-northd.c:1234", down to just the part following the
@@ -14082,6 +14102,8 @@ main(int argc, char *argv[])
add_column_noalert(ovnsb_idl_loop.idl, &sbrec_logical_flow_col_priority);
add_column_noalert(ovnsb_idl_loop.idl, &sbrec_logical_flow_col_match);
add_column_noalert(ovnsb_idl_loop.idl, &sbrec_logical_flow_col_actions);
+ add_column_noalert(ovnsb_idl_loop.idl,
+ &sbrec_logical_flow_col_controller_meter);
ovsdb_idl_add_table(ovnsb_idl_loop.idl,
&sbrec_table_logical_dp_group);
diff --git a/ovn-nb.ovsschema b/ovn-nb.ovsschema
index 29019809c..fb0f3a7c0 100644
--- a/ovn-nb.ovsschema
+++ b/ovn-nb.ovsschema
@@ -1,7 +1,7 @@
{
"name": "OVN_Northbound",
- "version": "5.31.0",
- "cksum": "2352750632 28701",
+ "version": "5.32.0",
+ "cksum": "2317195278 29378",
"tables": {
"NB_Global": {
"columns": {
@@ -30,6 +30,14 @@
"ipsec": {"type": "boolean"}},
"maxRows": 1,
"isRoot": true},
+ "Copp": {
+ "columns": {
+ "meters": {
+ "type": {"key": "string",
+ "value": "string",
+ "min": 0,
+ "max": "unlimited"}}},
+ "isRoot": true},
"Logical_Switch": {
"columns": {
"name": {"type": "string"},
@@ -58,6 +66,9 @@
"refType": "weak"},
"min": 0,
"max": "unlimited"}},
+ "copp": {"type": {"key": {"type": "uuid", "refTable": "Copp",
+ "refType": "weak"},
+ "min": 0, "max": 1}},
"other_config": {
"type": {"key": "string", "value": "string",
"min": 0, "max": "unlimited"}},
@@ -319,6 +330,9 @@
"refType": "weak"},
"min": 0,
"max": "unlimited"}},
+ "copp": {"type": {"key": {"type": "uuid", "refTable": "Copp",
+ "refType": "weak"},
+ "min": 0, "max": 1}},
"options": {
"type": {"key": "string",
"value": "string",
diff --git a/ovn-nb.xml b/ovn-nb.xml
index feb38b5d3..0f03a12f2 100644
--- a/ovn-nb.xml
+++ b/ovn-nb.xml
@@ -339,6 +339,68 @@
</table>
+ <table name="Copp" title="Control plane protection">
+ <p>
+ This table is used to define control plane protection policies, i.e.,
+ associate entries from table <ref table="Meter"/> to control protocol
+ names.
+ </p>
+ <column name="meters" key="arp">
+ Rate limiting meter for ARP packets (request/reply) used for learning
+ neighbors.
+ </column>
+ <column name="meters" key="arp-resolve">
+ Rate limiting meter for packets that require resolving the next-hop
+ (through ARP).
+ </column>
+ <column name="meters" key="dhcpv4-opts">
+ Rate limiting meter for packets that require adding DHCPv4 options.
+ </column>
+ <column name="meters" key="dhcpv6-opts">
+ Rate limiting meter for packets that require adding DHCPv6 options.
+ </column>
+ <column name="meters" key="dns">
+ Rate limiting meter for DNS query packets that need to be replied to.
+ </column>
+ <column name="meters" key="event-elb">
+ Rate limiting meter for empty load balancer events.
+ </column>
+ <column name="meters" key="icmp4-error">
+ Rate limiting meter for packets that require replying with an ICMP
+ error.
+ </column>
+ <column name="meters" key="icmp6-error">
+ Rate limiting meter for packets that require replying with an ICMPv6
+ error.
+ </column>
+ <column name="meters" key="igmp">
+ Rate limiting meter for IGMP packets.
+ </column>
+ <column name="meters" key="nd-na">
+ Rate limiting meter for ND neighbor advertisement packets used for
+ learning neighbors.
+ </column>
+ <column name="meters" key="nd-ns">
+ Rate limiting meter for ND neighbor solicitation packets used for
+ learning neighbors.
+ </column>
+ <column name="meters" key="nd-ns-resolve">
+ Rate limiting meter for packets that require resolving the next-hop
+ (through ND).
+ </column>
+ <column name="meters" key="nd-ra-opts">
+ Rate limiting meter for packets that require adding ND router
+ advertisement options.
+ </column>
+ <column name="meters" key="tcp-reset">
+ Rate limiting meter for packets that require replying with TCP RST
+ packet.
+ </column>
+ <column name="meters" key="bfd">
+ Rate limiting meter for BFD packets.
+ </column>
+ </table>
+
<table name="Logical_Switch" title="L2 logical switch">
<p>
Each row represents one L2 logical switch.
@@ -572,6 +634,14 @@
</column>
</group>
+ <column name="copp">
+ <p>
+ The control plane protection policy from table <ref table="Copp"/>
+ used for metering packets sent to <code>ovn-controller</code> from
+ ports of this logical switch.
+ </p>
+ </column>
+
<group title="Other options">
<column name="other_config" key="vlan-passthru"
type='{"type": "boolean"}'>
@@ -1929,6 +1999,14 @@
</column>
</group>
+ <column name="copp">
+ <p>
+ The control plane protection policy from table <ref table="Copp"/>
+ used for metering packets sent to <code>ovn-controller</code> from
+ logical ports of this router.
+ </p>
+ </column>
+
<group title="Options">
<p>
Additional options for the logical router.
diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
index 32afb4fa8..7c18e6302 100644
--- a/tests/ovn-northd.at
+++ b/tests/ovn-northd.at
@@ -2649,6 +2649,55 @@ wait_row_count bfd 3
AT_CLEANUP
])
+OVN_FOR_EACH_NORTHD([
+AT_SETUP([ovn -- check CoPP config])
+AT_KEYWORDS([northd-CoPP])
+ovn_start
+
+check ovn-nbctl --wait=sb lr-add r0
+check ovn-nbctl --wait=sb lrp-add r0 r0-sw1 00:00:00:00:00:01 192.168.1.1/24
+check ovn-nbctl --wait=sb ls-add sw1
+check ovn-nbctl --wait=sb lsp-add sw1 sw1-r0
+check ovn-nbctl --wait=sb lsp-set-type sw1-r0 router
+check ovn-nbctl --wait=sb lsp-set-options sw1-r0 router-port=r0-sw1
+check ovn-nbctl --wait=sb lsp-set-addresses sw1-r0 00:00:00:00:00:01
+
+ovn-nbctl --wait=hv meter-add meter0 drop 100 pktps 10
+ovn-nbctl --wait=hv ls-copp-add sw1 event-elb meter0
+AT_CHECK([ovn-nbctl ls-copp-list sw1], [0], [dnl
+event-elb: meter0
+])
+
+ovn-nbctl --wait=hv meter-add meter1 drop 200 pktps 10
+ovn-nbctl --wait=hv ls-copp-add sw1 arp meter1
+AT_CHECK([ovn-nbctl ls-copp-list sw1], [0], [dnl
+arp: meter1
+event-elb: meter0
+])
+
+ovn-nbctl --wait=hv ls-copp-del sw1 arp
+AT_CHECK([ovn-nbctl ls-copp-list sw1], [0], [dnl
+event-elb: meter0
+])
+
+ovn-nbctl --wait=hv ls-copp-del sw1 event-elb
+AT_CHECK([ovn-nbctl ls-copp-list sw1], [0], [dnl
+])
+
+ovn-nbctl --wait=hv lr-copp-add r0 bfd meter0
+AT_CHECK([ovn-nbctl lr-copp-list r0], [0], [dnl
+bfd: meter0
+])
+
+ovn-nbctl --wait=hv lr-copp-add r0 igmp meter1
+AT_CHECK([ovn-nbctl lr-copp-list r0], [0], [dnl
+bfd: meter0
+igmp: meter1
+])
+
+AT_CLEANUP
+])
+
AT_SETUP([ovn -- check LSP attached to multiple LS])
ovn_start
diff --git a/utilities/ovn-nbctl.8.xml b/utilities/ovn-nbctl.8.xml
index 03d47dba5..6c95e8104 100644
--- a/utilities/ovn-nbctl.8.xml
+++ b/utilities/ovn-nbctl.8.xml
@@ -1131,6 +1131,122 @@
</dd>
</dl>
+ <h1> Control Plane Protection Policy commands</h1>
+ <p>
+ These commands manages meters contained in <ref table="Copp"/> table
+ linking them to logical datapaths through <code>copp</code> column in
+ <ref table="Logical_Switch" /> or <ref table="Logical_Router" /> tables.
+ Protocol packets for which CoPP is enforced when sending packets to
+ ovn-controller (if configured):
+ <ul>
+ <li>ARP</li>
+ <li>ND_NS</li>
+ <li>ND_NA</li>
+ <li>ND_RA</li>
+ <li>ND</li>
+ <li>DNS</li>
+ <li>IGMP</li>
+ <li>packets that require ARP resolution before forwarding</li>
+ <li>packets that require ND_NS before forwarding</li>
+ <li>packets that need to be replied to with ICMP Errors</li>
+ <li>packets that need to be replied to with TCP RST</li>
+ <li>packets that need to be replied to with DHCP_OPTS</li>
+ <li>BFD</li>
+ </ul>
+ </p>
+
+ <dl>
+ <dt><code>ls-copp-add</code> <var>switch</var> <var>proto</var>
+ <var>meter</var></dt>
+ <dd>
+ Adds the control <code>proto</code> to <code>meter</code> mapping
+ to the <code>switch</code> control plane protection policy. If no
+ policy exists yet, it creates one. If a mapping already existed for
+ <code>proto</code>, this will overwrite it.
+ </dd>
+
+ <dt><code>ls-copp-del</code> <var>switch</var> [<var>proto</var>]</dt>
+ <dd>
+ Removes the control <code>proto</code> mapping from the
+ <code>switch</code> control plane protection policy. If
+ <code>proto</code> is not specified, the whole control plane
+ protection policy is destroyed.
+ </dd>
+
+ <dt><code>ls-copp-list</code> <var>switch</var></dt>
+ <dd>
+ Display the current control plane protection policy for
+ <code>switch</code>.
+ </dd>
+
+ <dt><code>lsp-copp-add</code> <var>proto</var> <var>proto</var>
+ <var>meter</var></dt>
+ <dd>
+ Adds the control <code>proto</code> to <code>meter</code> mapping
+ to the <code>port</code> control plane protection policy. If no
+ policy exists yet, it creates one. If a mapping already existed for
+ <code>proto</code>, this will overwrite it.
+ </dd>
+
+ <dt><code>lsp-copp-del</code> <var>port</var> [<var>proto</var>]</dt>
+ <dd>
+ Removes the control <code>proto</code> mapping from the
+ <code>port</code> control plane protection policy. If
+ <code>proto</code> is not specified, the whole control plane
+ protection policy is destroyed.
+ </dd>
+ <dt><code>lsp-copp-list</code> <var>port</var></dt>
+ <dd>
+ Display the current control plane protection policy for
+ <code>port</code>.
+ </dd>
+
+ <dt><code>lr-copp-add</code> <var>router</var> <var>proto</var>
+ <var>meter</var></dt>
+ <dd>
+ Adds the control <code>proto</code> to <code>meter</code> mapping
+ to the <code>router</code> control plane protection policy. If no
+ policy exists yet, it creates one. If a mapping already existed for
+ <code>proto</code>, this will overwrite it.
+ </dd>
+
+ <dt><code>lr-copp-del</code> <var>router</var> [<var>proto</var>]</dt>
+ <dd>
+ Removes the control <code>proto</code> mapping from the
+ <code>router</code> control plane protection policy. If
+ <code>proto</code> is not specified, the whole control plane
+ protection policy is destroyed.
+ </dd>
+
+ <dt><code>lr-copp-list</code> <var>router</var></dt>
+ <dd>
+ Display the current control plane protection policy for
+ <code>router</code>.
+ </dd>
+
+ <dt><code>lrp-copp-add</code> <var>proto</var> <var>proto</var>
+ <var>meter</var></dt>
+ <dd>
+ Adds the control <code>proto</code> to <code>meter</code> mapping
+ to the <code>port</code> control plane protection policy. If no
+ policy exists yet, it creates one. If a mapping already existed for
+ <code>proto</code>, this will overwrite it.
+ </dd>
+
+ <dt><code>lrp-copp-del</code> <var>port</var> [<var>proto</var>]</dt>
+ <dd>
+ Removes the control <code>proto</code> mapping from the
+ <code>port</code> control plane protection policy. If
+ <code>proto</code> is not specified, the whole control plane
+ protection policy is destroyed.
+ </dd>
+ <dt><code>lrp-copp-list</code> <var>port</var></dt>
+ <dd>
+ Display the current control plane protection policy for
+ <code>port</code>.
+ </dd>
+ </dl>
+
<h1>Database Commands</h1>
<p>These commands query and modify the contents of <code>ovsdb</code> tables.
They are a slight abstraction of the <code>ovsdb</code> interface and
diff --git a/utilities/ovn-nbctl.c b/utilities/ovn-nbctl.c
index 042c21002..2299bc6ce 100644
--- a/utilities/ovn-nbctl.c
+++ b/utilities/ovn-nbctl.c
@@ -27,6 +27,7 @@
#include "jsonrpc.h"
#include "openvswitch/json.h"
#include "lib/acl-log.h"
+#include "lib/copp.h"
#include "lib/ovn-nb-idl.h"
#include "lib/ovn-util.h"
#include "memory.h"
@@ -835,6 +836,28 @@ chassis with optional PRIORITY to the HA chassis group GRP\n\
ha-chassis-group-remove-chassis GRP CHASSIS Removes the HA chassis\
CHASSIS from the HA chassis group GRP\n\
\n\
+Control Plane Protection Policy commands:\n\
+ ls-copp-add SWITCH PROTO METER\n\
+ Add a copp policy for PROTO packets on SWITCH\n\
+ based on an existing METER.\n\
+ ls-copp-del SWITCH [PROTO]\n\
+ Delete the copp policy for PROTO packets on\n\
+ SWITCH. If PROTO is not specified, delete all\n\
+ copp policies on SWITCH.\n\
+ ls-copp-list SWITCH\n\
+ List all copp policies defined for control\n\
+ protocols on SWITCH.\n\
+ lr-copp-add ROUTER PROTO METER\n\
+ Add a copp policy for PROTO packets on ROUTER\n\
+ based on an existing METER.\n\
+ lr-copp-del ROUTER [PROTO]\n\
+ Delete the copp policy for PROTO packets on\n\
+ ROUTER. If PROTO is not specified, delete all\n\
+ copp policies on ROUTER.\n\
+ lr-copp-list ROUTER\n\
+ List all copp policies defined for control\n\
+ protocols on ROUTER.\n\
+\n\
%s\
%s\
\n\
@@ -5711,6 +5734,138 @@ nbctl_lr_route_list(struct ctl_context *ctx)
free(ipv6_routes);
}
+static void
+nbctl_ls_copp_add(struct ctl_context *ctx)
+{
+ const char *ls_name = ctx->argv[1];
+ const char *proto_name = ctx->argv[2];
+ const char *meter = ctx->argv[3];
+
+ char *error = copp_proto_validate(proto_name);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ const struct nbrec_logical_switch *ls = NULL;
+ error = ls_by_name_or_uuid(ctx, ls_name, true, &ls);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ const struct nbrec_copp *copp =
+ copp_add_meter(ctx, ls->copp, proto_name, meter);
+ nbrec_logical_switch_set_copp(ls, copp);
+}
+
+static void
+nbctl_ls_copp_del(struct ctl_context *ctx)
+{
+ const char *ls_name = ctx->argv[1];
+ const char *proto_name = NULL;
+ char *error;
+
+ if (ctx->argc == 3) {
+ proto_name = ctx->argv[2];
+ error = copp_proto_validate(proto_name);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+ }
+
+ const struct nbrec_logical_switch *ls = NULL;
+ error = ls_by_name_or_uuid(ctx, ls_name, true, &ls);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ copp_del_meter(ls->copp, proto_name);
+}
+
+static void
+nbctl_ls_copp_list(struct ctl_context *ctx)
+{
+ const char *ls_name = ctx->argv[1];
+
+ const struct nbrec_logical_switch *ls = NULL;
+ char *error = ls_by_name_or_uuid(ctx, ls_name, true, &ls);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ copp_list(ctx, ls->copp);
+}
+
+static void
+nbctl_lr_copp_add(struct ctl_context *ctx)
+{
+ const char *lr_name = ctx->argv[1];
+ const char *proto_name = ctx->argv[2];
+ const char *meter = ctx->argv[3];
+
+ char *error = copp_proto_validate(proto_name);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ const struct nbrec_logical_router *lr = NULL;
+ error = lr_by_name_or_uuid(ctx, lr_name, true, &lr);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ const struct nbrec_copp *copp =
+ copp_add_meter(ctx, lr->copp, proto_name, meter);
+ nbrec_logical_router_set_copp(lr, copp);
+}
+
+static void
+nbctl_lr_copp_del(struct ctl_context *ctx)
+{
+ const char *lr_name = ctx->argv[1];
+ const char *proto_name = NULL;
+ char *error;
+
+ if (ctx->argc == 3) {
+ proto_name = ctx->argv[2];
+ error = copp_proto_validate(proto_name);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+ }
+
+ const struct nbrec_logical_router *lr = NULL;
+ error = lr_by_name_or_uuid(ctx, lr_name, true, &lr);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ copp_del_meter(lr->copp, proto_name);
+}
+
+static void
+nbctl_lr_copp_list(struct ctl_context *ctx)
+{
+ const char *lr_name = ctx->argv[1];
+
+ const struct nbrec_logical_router *lr = NULL;
+ char *error = lr_by_name_or_uuid(ctx, lr_name, true, &lr);
+ if (error) {
+ ctx->error = error;
+ return;
+ }
+
+ copp_list(ctx, lr->copp);
+}
+
static void
verify_connections(struct ctl_context *ctx)
{
@@ -6673,6 +6828,18 @@ static const struct ctl_command_syntax nbctl_commands[] = {
{"dhcp-options-get-options", 1, 1, "DHCP_OPT_UUID", NULL,
nbctl_dhcp_options_get_options, NULL, "", RO },
+ /* Control plane protection commands */
+ {"ls-copp-add", 3, 3, "SWITCH PROTO METER", NULL, nbctl_ls_copp_add, NULL,
+ "", RW},
+ {"ls-copp-del", 1, 2, "SWITCH [PROTO]", NULL, nbctl_ls_copp_del, NULL,
+ "", RW},
+ {"ls-copp-list", 1, 1, "SWITCH", NULL, nbctl_ls_copp_list, NULL, "", RO},
+ {"lr-copp-add", 3, 3, "ROUTER PROTO METER", NULL, nbctl_lr_copp_add, NULL,
+ "", RW},
+ {"lr-copp-del", 1, 2, "ROUTER [PROTO]", NULL, nbctl_lr_copp_del, NULL,
+ "", RW},
+ {"lr-copp-list", 1, 1, "ROUTER", NULL, nbctl_lr_copp_list, NULL, "", RO},
+
/* Connection commands. */
{"get-connection", 0, 0, "", pre_connection, cmd_get_connection, NULL, "", RO},
{"del-connection", 0, 0, "", pre_connection, cmd_del_connection, NULL, "", RW},
--
2.30.2
More information about the dev
mailing list