[ovs-dev] [PATCH ovn v4 2/2] northd: Provide the option to not use ct.inv in lflows.
Numan Siddique
numans at ovn.org
Fri May 7 01:12:49 UTC 2021
On Thu, May 6, 2021, 7:00 PM Han Zhou <hzhou at ovn.org> wrote:
> On Thu, May 6, 2021 at 11:41 AM Numan Siddique <numans at ovn.org> wrote:
> >
> > On Thu, May 6, 2021 at 2:35 AM Han Zhou <hzhou at ovn.org> wrote:
> > >
> > > On Thu, Apr 22, 2021 at 6:25 AM <numans at ovn.org> wrote:
> > > >
> > > > From: Numan Siddique <numans at ovn.org>
> > > >
> > > > Presently we add 65535 priority lflows in the stages -
> > > > 'ls_in_acl' and 'ls_out_acl' to drop packets which
> > > > match on 'ct.inv'.
> > > >
> > > > This patch provides an option to not use this field in the
> > > > logical flow matches for the following
> > > > reasons:
> > > >
> > > > • Some of the smart NICs which support offloading datapath
> > > > flows may not support this field. In such cases, almost
> > > > all the datapath flows (matching on the ct_state field +inv
> > > > or -inv cannot be offloaded if ACLs/load balancers
> > > > are configured on the logical switch datapath.
> > > >
> > > > • A recent commit in kernel ovs datapath sets the committed
> > > > connection tracking entry to be liberal for out-of-window
> > > > tcp packets (nf_ct_set_tcp_be_liberal()). Such TCP
> > > > packets will not be marked as invalid.
> > > >
> > > > There are still certain scenarios where a packet can be marked
> > > > invalid. Like
> > > > • If the tcp flags are not correct.
> > > >
> > > > • If there are checksum errors.
> > > >
> > > > In such cases, the packet will be delivered to the destination
> > > > port. So CMS should evaluate their usecases before enabling
> > > > this option.
> > > >
> > > > Signed-off-by: Numan Siddique <numans at ovn.org>
> > > > Co-authored-by: Ben Pfaff <blp at ovn.org>
> > > > Signed-off-by: Ben Pfaff <blp at ovn.org>
> > > > ---
> > > > v3 -> v4
> > > > ---
> > > > * Moved the static variable 'use_ct_inv_match' declaration up in
> the
> > > > file.
> > > >
> > > > v2 -> v3
> > > > ----
> > > > * Updated the documentation in ovn-nb.xml as per Mark G's
> suggestion.
> > > >
> > > > v1 -> v2
> > > > ----
> > > > * Adopted the code changes shared by Ben Pfaff for the ddlog code.
> > > >
> > > > NEWS | 7 +-
> > > > northd/lswitch.dl | 7 +
> > > > northd/ovn-northd.c | 42 +++---
> > > > northd/ovn_northd.dl | 304
> ++++++++++++++++++++++---------------------
> > > > ovn-nb.xml | 15 +++
> > > > 5 files changed, 208 insertions(+), 167 deletions(-)
> > > >
> > > > diff --git a/NEWS b/NEWS
> > > > index 1ddde15f86..5f1365775d 100644
> > > > --- a/NEWS
> > > > +++ b/NEWS
> > > > @@ -6,11 +6,16 @@ Post-v21.03.0
> > > > expected to scale better than the C implementation, for large
> > > deployments.
> > > > (This may take testing and tuning to be effective.) This
> version of
> > > OVN
> > > > requires DDLog 0.36.
> > > > - - Introduce ovn-controller incremetal processing engine statistics
> > > > + - Introduce ovn-controller incremental processing engine
> statistics
> > > > - Introduced parallel processing in ovn-northd with the NB_Global
> > > config option
> > > > 'use_parallel_build' to enable it. It is disabled by default.
> > > > - Support vlan-passthru mode for tag=0 localnet ports.
> > > > - Support custom 802.11ad EthType for localnet ports.
> > > > + - Add a new NB Global option - use_ct_inv_match with the default
> value
> > > of true.
> > > > + If this is set to false, then the logical field - "ct.inv" will
> not
> > > be
> > > > + used in the logical flow matches. CMS can consider setting this
> to
> > > false,
> > > > + if they want to use smart NICs which don't support offloading
> > > datapath flows
> > > > + with this field used.
> > > >
> > > > OVN v21.03.0 - 12 Mar 2021
> > > > -------------------------
> > > > diff --git a/northd/lswitch.dl b/northd/lswitch.dl
> > > > index 47c497e0cf..27ac3cadc5 100644
> > > > --- a/northd/lswitch.dl
> > > > +++ b/northd/lswitch.dl
> > > > @@ -742,3 +742,10 @@ function put_svc_monitor_mac(options:
> > > Map<string,string>,
> > > > relation SvcMonitorMac(mac: eth_addr)
> > > > SvcMonitorMac(get_svc_monitor_mac(options, uuid)) :-
> > > > nb::NB_Global(._uuid = uuid, .options = options).
> > > > +
> > > > +relation UseCtInvMatch[bool]
> > > > +UseCtInvMatch[options.get_bool_def("use_ct_inv_match", true)] :-
> > > > + nb::NB_Global(.options = options).
> > > > +UseCtInvMatch[true] :-
> > > > + Unit(),
> > > > + not nb in nb::NB_Global().
> > > > diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c
> > > > index de1aa896d3..5f6c0a6922 100644
> > > > --- a/northd/ovn-northd.c
> > > > +++ b/northd/ovn-northd.c
> > > > @@ -98,6 +98,10 @@ static bool check_lsp_is_up;
> > > > static char svc_monitor_mac[ETH_ADDR_STRLEN + 1];
> > > > static struct eth_addr svc_monitor_mac_ea;
> > > >
> > > > +/* If this option is 'true' northd will make use of ct.inv match
> fields.
> > > > + * Otherwise, it will avoid using it. The default is true. */
> > > > +static bool use_ct_inv_match = true;
> > > > +
> > > > /* Default probe interval for NB and SB DB connections. */
> > > > #define DEFAULT_PROBE_INTERVAL_MSEC 5000
> > > > static int northd_probe_interval_nb = 0;
> > > > @@ -4099,7 +4103,6 @@ do_ovn_lflow_add(struct hmap *lflow_map, bool
> > > shared,
> > > > hmap_insert_fast(lflow_map, &lflow->hmap_node, hash);
> > > > }
> > > >
> > > > -
> > > > /* Adds a row with the specified contents to the Logical_Flow table.
> */
> > > > static void
> > > > ovn_lflow_add_at(struct hmap *lflow_map, struct ovn_datapath *od,
> > > > @@ -5712,12 +5715,13 @@ build_acls(struct ovn_datapath *od, struct
> hmap
> > > *lflows,
> > > > * for deletion (bit 0 of ct_label is set).
> > > > *
> > > > * This is enforced at a higher priority than ACLs can be
> > > defined. */
> > > > + char *match = xasprintf("%s(ct.est && ct.rpl &&
> ct_label.blocked
> > > == 1)",
> > > > + use_ct_inv_match ? "ct.inv || " :
> "");
> > > > ovn_lflow_add(lflows, od, S_SWITCH_IN_ACL, UINT16_MAX,
> > > > - "ct.inv || (ct.est && ct.rpl &&
> ct_label.blocked
> > > == 1)",
> > > > - "drop;");
> > > > + match, "drop;");
> > > > ovn_lflow_add(lflows, od, S_SWITCH_OUT_ACL, UINT16_MAX,
> > > > - "ct.inv || (ct.est && ct.rpl &&
> ct_label.blocked
> > > == 1)",
> > > > - "drop;");
> > > > + match, "drop;");
> > > > + free(match);
> > > >
> > > > /* Ingress and Egress ACL Table (Priority 65535).
> > > > *
> > > > @@ -5728,14 +5732,15 @@ build_acls(struct ovn_datapath *od, struct
> hmap
> > > *lflows,
> > > > * direction to hit the currently defined policy from ACLs.
> > > > *
> > > > * This is enforced at a higher priority than ACLs can be
> > > defined. */
> > > > + match = xasprintf("ct.est && !ct.rel && !ct.new%s && "
> > > > + "ct.rpl && ct_label.blocked == 0",
> > > > + use_ct_inv_match ? " && !ct.inv" : "");
> > > > +
> > > > ovn_lflow_add(lflows, od, S_SWITCH_IN_ACL, UINT16_MAX,
> > > > - "ct.est && !ct.rel && !ct.new && !ct.inv "
> > > > - "&& ct.rpl && ct_label.blocked == 0",
> > > > - "next;");
> > > > + match, "next;");
> > > > ovn_lflow_add(lflows, od, S_SWITCH_OUT_ACL, UINT16_MAX,
> > > > - "ct.est && !ct.rel && !ct.new && !ct.inv "
> > > > - "&& ct.rpl && ct_label.blocked == 0",
> > > > - "next;");
> > > > + match, "next;");
> > > > + free(match);
> > > >
> > > > /* Ingress and Egress ACL Table (Priority 65535).
> > > > *
> > > > @@ -5748,14 +5753,14 @@ build_acls(struct ovn_datapath *od, struct
> hmap
> > > *lflows,
> > > > * a dynamically negotiated FTP data channel), but will
> allow
> > > > * related traffic such as an ICMP Port Unreachable through
> > > > * that's generated from a non-listening UDP port. */
> > > > + match = xasprintf("!ct.est && ct.rel && !ct.new%s && "
> > > > + "ct_label.blocked == 0",
> > > > + use_ct_inv_match ? " && !ct.inv" : "");
> > > > ovn_lflow_add(lflows, od, S_SWITCH_IN_ACL, UINT16_MAX,
> > > > - "!ct.est && ct.rel && !ct.new && !ct.inv "
> > > > - "&& ct_label.blocked == 0",
> > > > - "next;");
> > > > + match, "next;");
> > > > ovn_lflow_add(lflows, od, S_SWITCH_OUT_ACL, UINT16_MAX,
> > > > - "!ct.est && ct.rel && !ct.new && !ct.inv "
> > > > - "&& ct_label.blocked == 0",
> > > > - "next;");
> > > > + match, "next;");
> > > > + free(match);
> > > >
> > > > /* Ingress and Egress ACL Table (Priority 65535).
> > > > *
> > > > @@ -13195,6 +13200,9 @@ ovnnb_db_run(struct northd_context *ctx,
> > > >
> > > > use_logical_dp_groups = smap_get_bool(&nb->options,
> > > > "use_logical_dp_groups",
> > > false);
> > > > + use_ct_inv_match = smap_get_bool(&nb->options,
> > > > + "use_ct_inv_match", true);
> > > > +
> > > > /* deprecated, use --event instead */
> > > > controller_event_en = smap_get_bool(&nb->options,
> > > > "controller_event", false);
> > > > diff --git a/northd/ovn_northd.dl b/northd/ovn_northd.dl
> > > > index 2f5d36c599..a0f7944103 100644
> > > > --- a/northd/ovn_northd.dl
> > > > +++ b/northd/ovn_northd.dl
> > > > @@ -2280,173 +2280,179 @@ for (Reject(lsuuid, pipeline, stage, acl,
> > > fair_meter, extra_match_, extra_action
> > > > }
> > > >
> > > > /* build_acls */
> > > > -for (sw in &Switch(.ls = ls))
> > > > -var has_stateful = sw.has_stateful_acl or sw.has_lb_vip in
> > > > -{
> > > > - /* Ingress and Egress ACL Table (Priority 0): Packets are
> allowed by
> > > > - * default. A related rule at priority 1 is added below if
> there
> > > > - * are any stateful ACLs in this datapath. */
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 0,
> > > > - .__match = "1",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 0,
> > > > - .__match = "1",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty());
> > > > -
> > > > - if (has_stateful) {
> > > > - /* Ingress and Egress ACL Table (Priority 1).
> > > > - *
> > > > - * By default, traffic is allowed. This is partially
> handled by
> > > > - * the Priority 0 ACL flows added earlier, but we also need
> to
> > > > - * commit IP flows. This is because, while the initiater's
> > > > - * direction may not have any stateful rules, the server's
> may
> > > > - * and then its return traffic would not have an associated
> > > > - * conntrack entry and would return "+invalid".
> > > > - *
> > > > - * We use "ct_commit" for a connection that is not already
> known
> > > > - * by the connection tracker. Once a connection is
> committed,
> > > > - * subsequent packets will hit the flow at priority 0 that
> just
> > > > - * uses "next;"
> > > > - *
> > > > - * We also check for established connections that have
> > > ct_label.blocked
> > > > - * set on them. That's a connection that was disallowed,
> but is
> > > > - * now allowed by policy again since it hit this
> default-allow
> > > flow.
> > > > - * We need to set ct_label.blocked=0 to let the connection
> > > continue,
> > > > - * which will be done by ct_commit() in the "stateful"
> stage.
> > > > - * Subsequent packets will hit the flow at priority 0 that
> just
> > > > - * uses "next;". */
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 1,
> > > > - .__match = "ip && (!ct.est || (ct.est &&
> > > ct_label.blocked == 1))",
> > > > - .actions = "${rEGBIT_CONNTRACK_COMMIT()} = 1;
> > > next;",
> > > > - .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 1,
> > > > - .__match = "ip && (!ct.est || (ct.est &&
> > > ct_label.blocked == 1))",
> > > > - .actions = "${rEGBIT_CONNTRACK_COMMIT()} = 1;
> > > next;",
> > > > - .external_ids = map_empty());
> > > > -
> > > > - /* Ingress and Egress ACL Table (Priority 65535).
> > > > - *
> > > > - * Always drop traffic that's in an invalid state. Also
> drop
> > > > - * reply direction packets for connections that have been
> marked
> > > > - * for deletion (bit 0 of ct_label is set).
> > > > - *
> > > > - * This is enforced at a higher priority than ACLs can be
> > > defined. */
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "ct.inv || (ct.est && ct.rpl &&
> > > ct_label.blocked == 1)",
> > > > - .actions = "drop;",
> > > > - .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "ct.inv || (ct.est && ct.rpl &&
> > > ct_label.blocked == 1)",
> > > > - .actions = "drop;",
> > > > - .external_ids = map_empty());
> > > > -
> > > > - /* Ingress and Egress ACL Table (Priority 65535).
> > > > - *
> > > > - * Allow reply traffic that is part of an established
> > > > - * conntrack entry that has not been marked for deletion
> > > > - * (bit 0 of ct_label). We only match traffic in the
> > > > - * reply direction because we want traffic in the request
> > > > - * direction to hit the currently defined policy from ACLs.
> > > > - *
> > > > - * This is enforced at a higher priority than ACLs can be
> > > defined. */
> > > > +for (UseCtInvMatch[use_ct_inv_match]) {
> > > > + (var ct_inv_or, var and_not_ct_inv) = match (use_ct_inv_match) {
> > > > + true -> ("ct.inv || ", "&& !ct.inv "),
> > > > + false -> ("", ""),
> > > > + } in
> > > > + for (sw in &Switch(.ls = ls))
> > > > + var has_stateful = sw.has_stateful_acl or sw.has_lb_vip in
> > > > + {
> > > > + /* Ingress and Egress ACL Table (Priority 0): Packets are
> > > allowed by
> > > > + * default. A related rule at priority 1 is added below if
> there
> > > > + * are any stateful ACLs in this datapath. */
> > > > Flow(.logical_datapath = ls._uuid,
> > > > .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "ct.est && !ct.rel && !ct.new &&
> > > !ct.inv "
> > > > - "&& ct.rpl && ct_label.blocked ==
> 0",
> > > > + .priority = 0,
> > > > + .__match = "1",
> > > > .actions = "next;",
> > > > .external_ids = map_empty());
> > > > Flow(.logical_datapath = ls._uuid,
> > > > .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "ct.est && !ct.rel && !ct.new &&
> > > !ct.inv "
> > > > - "&& ct.rpl && ct_label.blocked ==
> 0",
> > > > + .priority = 0,
> > > > + .__match = "1",
> > > > .actions = "next;",
> > > > .external_ids = map_empty());
> > > >
> > > > - /* Ingress and Egress ACL Table (Priority 65535).
> > > > - *
> > > > - * Allow traffic that is related to an existing conntrack
> entry
> > > that
> > > > - * has not been marked for deletion (bit 0 of ct_label).
> > > > - *
> > > > - * This is enforced at a higher priority than ACLs can be
> > > defined.
> > > > - *
> > > > - * NOTE: This does not support related data sessions (eg,
> > > > - * a dynamically negotiated FTP data channel), but will
> allow
> > > > - * related traffic such as an ICMP Port Unreachable through
> > > > - * that's generated from a non-listening UDP port. */
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "!ct.est && ct.rel && !ct.new &&
> > > !ct.inv "
> > > > - "&& ct_label.blocked == 0",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "!ct.est && ct.rel && !ct.new &&
> > > !ct.inv "
> > > > - "&& ct_label.blocked == 0",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty());
> > > > + if (has_stateful) {
> > > > + /* Ingress and Egress ACL Table (Priority 1).
> > > > + *
> > > > + * By default, traffic is allowed. This is partially
> > > handled by
> > > > + * the Priority 0 ACL flows added earlier, but we also
> need
> > > to
> > > > + * commit IP flows. This is because, while the
> initiater's
> > > > + * direction may not have any stateful rules, the
> server's
> > > may
> > > > + * and then its return traffic would not have an
> associated
> > > > + * conntrack entry and would return "+invalid".
> > > > + *
> > > > + * We use "ct_commit" for a connection that is not
> already
> > > known
> > > > + * by the connection tracker. Once a connection is
> > > committed,
> > > > + * subsequent packets will hit the flow at priority 0
> that
> > > just
> > > > + * uses "next;"
> > > > + *
> > > > + * We also check for established connections that have
> > > ct_label.blocked
> > > > + * set on them. That's a connection that was
> disallowed,
> > > but is
> > > > + * now allowed by policy again since it hit this
> > > default-allow flow.
> > > > + * We need to set ct_label.blocked=0 to let the
> connection
> > > continue,
> > > > + * which will be done by ct_commit() in the "stateful"
> stage.
> > > > + * Subsequent packets will hit the flow at priority 0
> that
> > > just
> > > > + * uses "next;". */
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_IN_ACL(),
> > > > + .priority = 1,
> > > > + .__match = "ip && (!ct.est || (ct.est &&
> > > ct_label.blocked == 1))",
> > > > + .actions = "${rEGBIT_CONNTRACK_COMMIT()} =
> 1;
> > > next;",
> > > > + .external_ids = map_empty());
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 1,
> > > > + .__match = "ip && (!ct.est || (ct.est &&
> > > ct_label.blocked == 1))",
> > > > + .actions = "${rEGBIT_CONNTRACK_COMMIT()} =
> 1;
> > > next;",
> > > > + .external_ids = map_empty());
> > > >
> > > > - /* Ingress and Egress ACL Table (Priority 65535).
> > > > - *
> > > > - * Not to do conntrack on ND packets. */
> > > > + /* Ingress and Egress ACL Table (Priority 65535).
> > > > + *
> > > > + * Always drop traffic that's in an invalid state. Also
> drop
> > > > + * reply direction packets for connections that have
> been
> > > marked
> > > > + * for deletion (bit 0 of ct_label is set).
> > > > + *
> > > > + * This is enforced at a higher priority than ACLs can
> be
> > > defined. */
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_IN_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = ct_inv_or ++ "(ct.est && ct.rpl
> &&
> > > ct_label.blocked == 1)",
> > > > + .actions = "drop;",
> > > > + .external_ids = map_empty());
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = ct_inv_or ++ "(ct.est && ct.rpl
> &&
> > > ct_label.blocked == 1)",
> > > > + .actions = "drop;",
> > > > + .external_ids = map_empty());
> > > > +
> > > > + /* Ingress and Egress ACL Table (Priority 65535).
> > > > + *
> > > > + * Allow reply traffic that is part of an established
> > > > + * conntrack entry that has not been marked for deletion
> > > > + * (bit 0 of ct_label). We only match traffic in the
> > > > + * reply direction because we want traffic in the
> request
> > > > + * direction to hit the currently defined policy from
> ACLs.
> > > > + *
> > > > + * This is enforced at a higher priority than ACLs can
> be
> > > defined. */
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_IN_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "ct.est && !ct.rel && !ct.new "
> ++
> > > and_not_ct_inv ++
> > > > + "&& ct.rpl && ct_label.blocked
> ==
> > > 0",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty());
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "ct.est && !ct.rel && !ct.new "
> ++
> > > and_not_ct_inv ++
> > > > + "&& ct.rpl && ct_label.blocked
> ==
> > > 0",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty());
> > > > +
> > > > + /* Ingress and Egress ACL Table (Priority 65535).
> > > > + *
> > > > + * Allow traffic that is related to an existing
> conntrack
> > > entry that
> > > > + * has not been marked for deletion (bit 0 of ct_label).
> > > > + *
> > > > + * This is enforced at a higher priority than ACLs can
> be
> > > defined.
> > > > + *
> > > > + * NOTE: This does not support related data sessions
> (eg,
> > > > + * a dynamically negotiated FTP data channel), but will
> allow
> > > > + * related traffic such as an ICMP Port Unreachable
> through
> > > > + * that's generated from a non-listening UDP port. */
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_IN_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "!ct.est && ct.rel && !ct.new "
> ++
> > > and_not_ct_inv ++
> > > > + "&& ct_label.blocked == 0",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty());
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "!ct.est && ct.rel && !ct.new "
> ++
> > > and_not_ct_inv ++
> > > > + "&& ct_label.blocked == 0",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty());
> > > > +
> > > > + /* Ingress and Egress ACL Table (Priority 65535).
> > > > + *
> > > > + * Not to do conntrack on ND packets. */
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_IN_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "nd || nd_ra || nd_rs || mldv1
> ||
> > > mldv2",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty());
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 65535,
> > > > + .__match = "nd || nd_ra || nd_rs || mldv1
> ||
> > > mldv2",
> > > > + .actions = "next;",
> > > > + .external_ids = map_empty())
> > > > + };
> > > > +
> > > > + /* Add a 34000 priority flow to advance the DNS reply from
> > > ovn-controller,
> > > > + * if the CMS has configured DNS records for the datapath.
> > > > + */
> > > > + if (sw.has_dns_records) {
> > > > + Flow(.logical_datapath = ls._uuid,
> > > > + .stage = s_SWITCH_OUT_ACL(),
> > > > + .priority = 34000,
> > > > + .__match = "udp.src == 53",
> > > > + .actions = if has_stateful "ct_commit;
> next;"
> > > else "next;",
> > > > + .external_ids = map_empty())
> > > > + };
> > > > +
> > > > + /* Add a 34000 priority flow to advance the service monitor
> reply
> > > > + * packets to skip applying ingress ACLs. */
> > > > Flow(.logical_datapath = ls._uuid,
> > > > .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "nd || nd_ra || nd_rs || mldv1 ||
> > > mldv2",
> > > > + .priority = 34000,
> > > > + .__match = "eth.dst == $svc_monitor_mac",
> > > > .actions = "next;",
> > > > .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 65535,
> > > > - .__match = "nd || nd_ra || nd_rs || mldv1 ||
> > > mldv2",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty())
> > > > - };
> > > > -
> > > > - /* Add a 34000 priority flow to advance the DNS reply from
> > > ovn-controller,
> > > > - * if the CMS has configured DNS records for the datapath.
> > > > - */
> > > > - if (sw.has_dns_records) {
> > > > Flow(.logical_datapath = ls._uuid,
> > > > .stage = s_SWITCH_OUT_ACL(),
> > > > .priority = 34000,
> > > > - .__match = "udp.src == 53",
> > > > - .actions = if has_stateful "ct_commit; next;"
> else
> > > "next;",
> > > > + .__match = "eth.src == $svc_monitor_mac",
> > > > + .actions = "next;",
> > > > .external_ids = map_empty())
> > > > - };
> > > > -
> > > > - /* Add a 34000 priority flow to advance the service monitor
> reply
> > > > - * packets to skip applying ingress ACLs. */
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_IN_ACL(),
> > > > - .priority = 34000,
> > > > - .__match = "eth.dst == $svc_monitor_mac",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty());
> > > > - Flow(.logical_datapath = ls._uuid,
> > > > - .stage = s_SWITCH_OUT_ACL(),
> > > > - .priority = 34000,
> > > > - .__match = "eth.src == $svc_monitor_mac",
> > > > - .actions = "next;",
> > > > - .external_ids = map_empty())
> > > > + }
> > > > }
> > > >
> > > > /* This stage builds hints for the IN/OUT_ACL stage. Based on
> various
> > > > diff --git a/ovn-nb.xml b/ovn-nb.xml
> > > > index feb38b5d31..e337be4eb3 100644
> > > > --- a/ovn-nb.xml
> > > > +++ b/ovn-nb.xml
> > > > @@ -240,6 +240,21 @@
> > > > </p>
> > > > </column>
> > > >
> > > > + <column name="options" key="use_ct_inv_match">
> > > > + <p>
> > > > + If set to false, <code>ovn-northd</code> will not use the
> > > > + <code>ct.inv</code> field in any of the logical flow
> matches.
> > > > + The default value is true. If the NIC supports offloading
> > > > + OVS datapath flows but doesn't support offloading ct_state
> > > > + <code>inv</code> flag, then the datapath flows matching on
> > > this flag
> > > > + (either <code>+inv</code> or <code>-inv</code>) will not
> be
> > > > + offloaded. CMS should consider setting
> > > <code>use_ct_inv_match</code>
> > > > + to <code>false</code> in such cases. This results in a
> side
> > > effect
> > > > + of the invalid packets getting delivered to the
> destination
> > > VIF, which
> > > > + otherwise would have been dropped by <code>OVN</code>.
> > > > + </p>
> > > > + </column>
> > > > +
> > > > <group title="Options for configuring interconnection route
> > > advertisement">
> > > > <p>
> > > > These options control how routes are advertised between
> OVN
> > > > --
> > > > 2.29.2
> > > >
> > > > _______________________________________________
> > > > dev mailing list
> > > > dev at openvswitch.org
> > > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
> > >
> > > Acked-by: Han Zhou <hzhou at ovn.org>
> >
> > Thanks for the reviews Mark G and Han.
> >
> > I applied both the patches to the main branch addressing Han's comment in
> p1.
> > When I submitted this patch, I had a test case which somehow got removed
> > in the later versions. I added the test case before applying.
> >
> > Regards
> > Numan
>
> Hi Numan,
>
> Seems this merge breaks the CI. All these vtep related cases are failing:
> 898: ovn-controller-vtep - chassis FAILED (ovn-controller-vtep.at:110)
> 899: ovn-controller-vtep - binding 1 FAILED (ovn-controller-vtep.at:178)
> 900: ovn-controller-vtep - binding 2 FAILED (ovn-controller-vtep.at:252)
> 901: ovn-controller-vtep - vtep-lswitch FAILED (ovn-controller-vtep.at:291
> )
> 902: ovn-controller-vtep - vtep-macs 1 FAILED (ovn-controller-vtep.at:343)
> 903: ovn-controller-vtep - vtep-macs 2 FAILED (ovn-controller-vtep.at:431)
>
> All these tests are successful when I run them locally. I haven't checked
> more details yet.
>
Hi Han,
I noticed that. In fact it's failing without these patches too.
I quickly looked into it and looks like it's failing because of some
warning message related to dns_resolve in ovsdb-server log.
I think wen need to white list this warning message in vtep tests.
Thanks
Numan
>
>
> Thanks,
> Han
> _______________________________________________
> dev mailing list
> dev at openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>
More information about the dev
mailing list