[ovs-dev] [PATCH ovn 2/3] Honor allow priority when stateless present

Ihar Hrachyshka ihrachys at redhat.com
Tue May 25 16:11:34 UTC 2021


On Thu, May 20, 2021 at 5:58 PM Han Zhou <hzhou at ovn.org> wrote:
>
>
>
> On Mon, May 17, 2021 at 2:47 PM Ihar Hrachyshka <ihrachys at redhat.com> wrote:
> >
> > For each allow-stateless ACL, a rule was added earlier in the pipeline
> > that circumvented setting REGBIT_CONNTRACK_DEFRAG regardless of
> > whether other, e.g. allow ACLs with higher priority were present.
> >
> > Now, when allow-stateless ACLs are present on the switch with other
> > allow-related ACLs, for each allow, insert an early pipeline rule that
> > would set DEFRAG bit for the corresponding match and priority.
> >
> > Fixes: 3187b9fef1 ("ovn-northd: introduce new allow-stateless ACL verb")
> >
>
> Looks good except that flow changes need to be documented.
> Acked-by: Han Zhou <hzhou at ovn.org>

The wording from the v2 version of the first patch in the series will cover it.

>
> > Signed-off-by: Ihar Hrachyshka <ihrachys at redhat.com>
> > ---
> >  northd/ovn-northd.c  |  3 ++
> >  northd/ovn_northd.dl |  2 +-
> >  tests/ovn-northd.at  | 72 ++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 76 insertions(+), 1 deletion(-)
> >
> > diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c
> > index 26b723165..a410be1de 100644
> > --- a/northd/ovn-northd.c
> > +++ b/northd/ovn-northd.c
> > @@ -5076,6 +5076,9 @@ build_stateful_override_filters(struct ovn_datapath *od,
> >      apply_to_each_acl_of_action(
> >          od, port_groups, lflows, "allow-related",
> >          build_stateful_override_filter);
> > +    apply_to_each_acl_of_action(
> > +        od, port_groups, lflows, "allow",
> > +        build_stateful_override_filter);
> >  }
> >
> >  static void
> > diff --git a/northd/ovn_northd.dl b/northd/ovn_northd.dl
> > index 7c2402be4..fc703f62e 100644
> > --- a/northd/ovn_northd.dl
> > +++ b/northd/ovn_northd.dl
> > @@ -1846,7 +1846,7 @@ for (&SwitchACL(.sw = sw@&Switch{.ls = ls}, .acl = &acl, .has_fair_meter = _)) {
> >
> >  for (&SwitchACL(.sw = sw@&Switch{.ls = ls}, .acl = &acl, .has_fair_meter = _)) {
> >      if (sw.has_stateless_acl) {
> > -        if (acl.action == "allow-related") {
> > +        if ((sw.has_stateful_acl and acl.action == "allow") or acl.action == "allow-related") {
> >              if (acl.direction == "from-lport") {
> >                  Flow(.logical_datapath = ls._uuid,
> >                       .stage            = s_SWITCH_IN_PRE_ACL(),
> > diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
> > index da75434b6..6c38e1a97 100644
> > --- a/tests/ovn-northd.at
> > +++ b/tests/ovn-northd.at
> > @@ -2755,6 +2755,78 @@ output("lsp2");
> >  AT_CLEANUP
> >  ])
> >
> > +OVN_FOR_EACH_NORTHD([
> > +AT_SETUP([ovn -- ACL priority: allow-stateless vs allow])
> > +ovn_start
> > +
> > +ovn-nbctl ls-add ls
> > +ovn-nbctl lsp-add ls lsp1
> > +ovn-nbctl lsp-set-addresses lsp1 00:00:00:00:00:01
> > +ovn-nbctl lsp-add ls lsp2
> > +ovn-nbctl lsp-set-addresses lsp2 00:00:00:00:00:02
> > +
> > +for direction in from to; do
> > +    ovn-nbctl acl-add ls ${direction}-lport 3 "tcp" allow
> > +done
> > +ovn-nbctl --wait=sb sync
> > +
> > +flow_eth='eth.src == 00:00:00:00:00:01 && eth.dst == 00:00:00:00:00:02'
> > +flow_ip='ip.ttl==64 && ip4.src == 42.42.42.1 && ip4.dst == 66.66.66.66'
> > +flow_tcp='tcp && tcp.dst == 80'
> > +flow_udp='udp && udp.dst == 80'
> > +lsp1_inport=$(fetch_column Port_Binding tunnel_key logical_port=lsp1)
> > +
> > +# TCP packets should not go to conntrack.
> > +flow="inport == \"lsp1\" && ${flow_eth} && ${flow_ip} && ${flow_tcp}"
> > +AT_CHECK_UNQUOTED([ovn-trace --minimal ls "${flow}"], [0], [dnl
> > +# tcp,reg14=0x${lsp1_inport},vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,nw_src=42.42.42.1,nw_dst=66.66.66.66,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=80,tcp_flags=0
> > +output("lsp2");
> > +])
> > +
> > +# Add allow-stateless with lower priority.
> > +for direction in from to; do
> > +    ovn-nbctl acl-add ls ${direction}-lport 1 tcp allow-stateless
> > +done
> > +ovn-nbctl --wait=sb sync
> > +
> > +# TCP packets should still not go to conntrack (allow ACL in effect).
> > +AT_CHECK_UNQUOTED([ovn-trace --ct new --ct new --minimal ls "${flow}"], [0], [dnl
> > +# tcp,reg14=0x${lsp1_inport},vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,nw_src=42.42.42.1,nw_dst=66.66.66.66,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=80,tcp_flags=0
> > +output("lsp2");
> > +])
> > +
> > +# Add allow-related to the switch.
> > +for direction in from to; do
> > +    ovn-nbctl acl-add ls ${direction}-lport 3 icmp allow-related
> > +done
> > +ovn-nbctl --wait=sb sync
> > +
> > +# TCP packets should now go to conntrack (allow ACL in effect, flipped its meaning to apply conntrack)
> > +AT_CHECK_UNQUOTED([ovn-trace --ct new --ct new --minimal ls "${flow}"], [0], [dnl
> > +# tcp,reg14=0x${lsp1_inport},vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,nw_src=42.42.42.1,nw_dst=66.66.66.66,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=80,tcp_flags=0
> > +ct_next(ct_state=new|trk) {
> > +    ct_next(ct_state=new|trk) {
> > +        output("lsp2");
> > +    };
> > +};
> > +])
> > +
> > +# Add allow-stateless with higher priority.
> > +for direction in from to; do
> > +    ovn-nbctl acl-add ls ${direction}-lport 5 tcp allow-stateless
> > +done
> > +ovn-nbctl --wait=sb sync
> > +
> > +
> > +# TCP packets should no longer go to conntrack (the new allow-stateless ACL in effect).
> > +AT_CHECK_UNQUOTED([ovn-trace --ct new --ct new --minimal ls "${flow}"], [0], [dnl
> > +# tcp,reg14=0x${lsp1_inport},vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,nw_src=42.42.42.1,nw_dst=66.66.66.66,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=80,tcp_flags=0
> > +output("lsp2");
> > +])
> > +
> > +AT_CLEANUP
> > +])
> > +
> >  OVN_FOR_EACH_NORTHD([
> >  AT_SETUP([ovn -- ACL allow-stateless omit conntrack - Logical_Switch])
> >  ovn_start
> > --
> > 2.31.1
> >
> > _______________________________________________
> > dev mailing list
> > dev at openvswitch.org
> > https://mail.openvswitch.org/mailman/listinfo/ovs-dev



More information about the dev mailing list