[ovs-discuss] sFlow

Justin Pettit jpettit at nicira.com
Sat Sep 5 01:28:09 UTC 2009

Terrific!  Thank you very much.  This will make it much easier to add  
sFlow to the project.  When we have an implementation working, we'll  
definitely take you up on your offer to help us test it.

By the way, I've already updated the bullet point on our project page  
to say "sFlow(R)" to keep up our end of the license.  ;-)

Thanks again!


On Sep 4, 2009, at 4:02 PM, Neil McKee wrote:

> Justin,
> Please accept this email as written confirmation that you may use  
> and adapt the source code for the InMon Virtual Probe (http://inmon.com/products/virtual-probe/index.php 
> ) for the implementation of an sFlow agent in the "Open vSwitch"  
> project (http://openvswitch.org/) under the terms of the sFlow  
> License (http://www.sflow.org/developers/licensing.php).
> Neil McKee
> Director
> InMon Corp.
> On Aug 28, 2009, at 10:38 PM, Neil Mckee wrote:
>> The sFlow SNMP MIB,  while very useful,  is optional.  It can be  
>> ignored for now.
>> The only counter-block you really need is the "generic" one,  which  
>> exports the basic MIB-II ifTable counters as a single snapshot.  I  
>> can see that this might be awkward because these counters must be  
>> updated with every packet,  in the fast-path.   Still,  you'll  
>> probably be expected to provide them eventually one way or another.
>> The simplest sampling implementation is usually to have just one  
>> packet-sampler for the whole switch,  and the critical path there  
>> is just to decrement the countdown to the next sample,  so that  
>> part is not going to slow you down at all.  I guess it's just a  
>> question of figuring out the best way to queue the samples for  
>> processing in user-space.
>> There are patents involved,  yes,  but the main sFlow license  
>> should not be an obstacle (http://www.sflow.org/developers/licensing.php 
>> ).   The license you were looking at was specific to the virtual  
>> probe implementation.    I'll check what we need to do to,  but it  
>> looks like it's probably enough for me to say in writing that you  
>> are welcome to use that code as long as you conform to the main  
>> sFlow license.  You'll probably rewrite the code anyway :).  Our  
>> main goal in putting it out there was just to say "wow, look how  
>> easy this is".
>> regards,
>> Neil
>> On Aug 28, 2009, at 6:23 PM, Justin Pettit wrote:
>>> Hi, Neil.  Thanks for the information!  We'd like to add native  
>>> support, but there are a few things that would need to be done:
>>> 	- sFlow uses SNMP to communicate between the collector and  
>>> agents, and we do not yet have support for SNMP.
>>> 	- For packet sampling, we'd need to make some modifications to  
>>> the protocol used to communicate with the datapath (in addition to  
>>> changes in the kernel and userspace).
>>> 	- For counter sampling, we'd need to keep track of a lot more  
>>> information than we currently do.
>>> Luckily, none of these technical issues are hard.  Our biggest  
>>> concern has been related to licensing and patents, since this is  
>>> an open source project.  Does InMon claim any patents or licensing  
>>> restrictions over projects that implement RFC 3176?
>>> The Virtual Switch Probe looks like a neat program and should work  
>>> with the current version of Open vSwitch.  However, clause 1(b) in  
>>> the license agreement that prevents using it for any commercial  
>>> purposes seems a bit worrying.
>>> --Justin
>>> On Aug 28, 2009, at 5:17 PM, Neil McKee wrote:
>>>> Hello all,
>>>> I saw you had sFlow on your list of features that are "under  
>>>> development",  so I thought I would offer to help if I can.   If  
>>>> you're just getting started, the source code linked from this  
>>>> page might help:
>>>> http://inmon.com/products/virtual-probe/index.php
>>>> (It the C source code to an sFlow agent designed to connect to a  
>>>> virtual SPAN port using libpcap).
>>>> If you already have something running,  then I'd be happy to help  
>>>> with the testing.
>>>> Neil McKee
>>>> InMon Corp.
>>>> _______________________________________________
>>>> discuss mailing list
>>>> discuss at openvswitch.org
>>>> http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org

More information about the discuss mailing list