[ovs-discuss] problem in adding flows
Prashant Chougule
chougulepavan at gmail.com
Sat Apr 27 06:52:37 UTC 2013
o/p means output,
content of the file1,(rule set)
1
priority=60008,in_port=1,idle_timeout=0,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
2
priority=60007,in_port=1,idle_timeout=0,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
3
priority=60006,in_port=1,idle_timeout=0,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
4
priority=60005,in_port=1,idle_timeout=0,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
5
priority=60004,in_port=1,idle_timeout=0,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
6
priority=60003,in_port=1,idle_timeout=0,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
7
priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
8
priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
9
priority=60001,in_port=1,idle_timeout=0,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
10
priority=60000,in_port=1,idle_timeout=0,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
the command,
sudo ./ovs-ofclt add-flow br0 file1
output of the command: unknown keyword priority
and i am not able to push these rules in table.
On Sat, Apr 27, 2013 at 12:06 PM, Justin Pettit <jpettit at nicira.com> wrote:
> You didn't include the contents of the file. Also, is that the actual
> output of the command? What's "o/p"?
>
> --Justin
>
>
> On Apr 26, 2013, at 11:31 PM, Prashant Chougule <chougulepavan at gmail.com>
> wrote:
>
> > ok..,
> >
> > i ran ovs on my local machine ubuntu 12.04, with bridge br0 and eth0
> port under that,
> > after that i create one file name "file1" with some 10 flows,
> > actually i want test the ovs with acl(access control list) rules, so i
> take some of their rules put it in ovs format as shown above,
> >
> > after that i ran command sudo ./ovs-ofctl add-flows br0 file1
> > o/p: unknown keyword priority
> > check with different format also like instead of priority i put
> in_port, dl_type still same problem.
> >
> >
> >
> >
> >
> >
> > On Sat, Apr 27, 2013 at 11:41 AM, Justin Pettit <jpettit at nicira.com>
> wrote:
> > I can't reproduce any problem loading flows in the 1.9 release. The
> flows you defined still won't match the nw_src and nw_dst, since you didn't
> specify matching IP packets. Perhaps if you showed what you actually ran,
> the contents of the file, and the output of the command, we might be able
> to help you more.
> >
> > --Justin
> >
> >
> > On Apr 26, 2013, at 10:11 PM, Prashant Chougule <chougulepavan at gmail.com>
> wrote:
> >
> > > same problem with these flows also ,
> > > unknown keyword priority when ./ovs-ofctl add-flow br0 file
> > >
> > > 1
> priority=60008,in_port=1,idle_timeout=0,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
> > > 2
> priority=60007,in_port=1,idle_timeout=0,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
> > > 3
> priority=60006,in_port=1,idle_timeout=0,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
> > > 4
> priority=60005,in_port=1,idle_timeout=0,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
> > > 5
> priority=60004,in_port=1,idle_timeout=0,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
> > > 6
> priority=60003,in_port=1,idle_timeout=0,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
> > > 7
> priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
> > > 8
> priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
> > > 9
> priority=60001,in_port=1,idle_timeout=0,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
> > > 10
> priority=60000,in_port=1,idle_timeout=0,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
> > >
> > > above flows not working, do i need to add some masking to abve i am
> using ovs-1.9.0 ?
> > >
> > > i try with other file with 10 flows like given one it, its working,it
> showing me in table.
> > >
> > >
> priority=60000,idle_timeout=50000,dl_type=0x0806,nw_src=192.168.1.9,nw_dst=192.168.1.15,table=20,dl_dst=b8:70:f4:a
> 8:a3:34,dl_src=e8:40:f2:3c:ad:93,nw_proto=1,actions=output:1
> > >
> > >
> > > On Sat, Apr 27, 2013 at 10:09 AM, Justin Pettit <jpettit at nicira.com>
> wrote:
> > > Most of the priority definitions don't look wrong, but here are a few
> things:
> > >
> > > - You can't specify a priority over 65535 (I see a 65536 in
> there), since it's expecting a 16-bit value.
> > > - Your dl_type won't work with your nw_src and nw_dst
> definitions, since it's not an IP ethertype.
> > > - I'm not sure it's in your file, but you can't put numbers
> before your flow definitions.
> > > - I'd use "ovs-ofctl add-flows <file>", since that's closer to
> what you want to do.
> > >
> > > --Justin
> > >
> > > On Apr 26, 2013, at 8:45 PM, Prashant Chougule <
> chougulepavan at gmail.com> wrote:
> > >
> > > > hi,
> > > >
> > > > I am trying to add file with 1000 rules, it will give me unknown
> keyword priority as a error if push individual flow it is working,
> > > > some of the rules from the file
> > > >
> > > >
> > > > 1
> priority=65536,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
> > > > 2
> priority=60001,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
> > > > 3
> priority=60002,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
> > > > 4
> priority=60003,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
> > > > 5
> priority=60004,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
> > > > 6
> priority=60005,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
> > > > 7
> priority=60006,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
> > > > 8
> priority=60007,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
> > > > 9
> priority=60008,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
> > > > 10
> priority=60009,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
> > > > it is standard rule set i put it in openflow format,
> > > > try with ./ovs-ofctl add-flow br0 -<file it show me ovs-ofctl:
> unknown keyword priority. is their any wrong in my syntax?
> > > >
> > > > --
> > > > Thanks &Regards,
> > > > Prashant Chougule.
> > > > _______________________________________________
> > > > discuss mailing list
> > > > discuss at openvswitch.org
> > > > http://openvswitch.org/mailman/listinfo/discuss
> > >
> > >
> > >
> > >
> > > --
> > > Thanks &Regards,
> > > Prashant Chougule.
> >
> >
> >
> >
> > --
> > Thanks &Regards,
> > Prashant Chougule.
>
>
--
Thanks &Regards,
Prashant Chougule.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20130427/53f80883/attachment.html>
More information about the discuss
mailing list