[ovs-discuss] problem in adding flows

Sat Apr 27 07:09:05 UTC 2013

I can't reproduce your problem, and you're not giving me the actual commands you're running, since the command you've provided has at least two typos that would prevent it from running.  Also, you still have problems in your file contents, which I've already pointed out a couple of times and you've not fixed.

I'd recommend carefully going over this thread and perhaps start building up from smaller flows.  Good luck.

--Justin

On Apr 26, 2013, at 11:52 PM, Prashant Chougule <chougulepavan at gmail.com> wrote:

> o/p means output,
> content of the file1,(rule set)
>   1 priority=60008,in_port=1,idle_timeout=0,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
>   2 priority=60007,in_port=1,idle_timeout=0,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
>   3 priority=60006,in_port=1,idle_timeout=0,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
>   4 priority=60005,in_port=1,idle_timeout=0,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
>   5 priority=60004,in_port=1,idle_timeout=0,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
>   6 priority=60003,in_port=1,idle_timeout=0,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
>   7 priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
>   8 priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
>   9 priority=60001,in_port=1,idle_timeout=0,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
>  10 priority=60000,in_port=1,idle_timeout=0,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
> 
> the command,
>  sudo ./ovs-ofclt add-flow br0 file1
> output of the command: unknown keyword priority
> and i am not able to push these rules in table.
> 
> 
> 
> On Sat, Apr 27, 2013 at 12:06 PM, Justin Pettit <jpettit at nicira.com> wrote:
> You didn't include the contents of the file.  Also, is that the actual output of the command?  What's "o/p"?
> 
> --Justin
> 
> 
> On Apr 26, 2013, at 11:31 PM, Prashant Chougule <chougulepavan at gmail.com> wrote:
> 
> > ok..,
> >
> > i ran ovs on my local machine ubuntu 12.04, with bridge br0 and eth0 port under that,
> >  after that i create one file name "file1" with some 10 flows,
> > actually i want test the ovs with acl(access control list) rules, so i take some of their rules put it in ovs format as shown above,
> >
> > after that i ran command sudo ./ovs-ofctl add-flows br0 file1
> >              o/p: unknown keyword priority
> >  check with different format also like instead of priority i put in_port, dl_type still same problem.
> >
> >
> >
> >
> >
> >
> > On Sat, Apr 27, 2013 at 11:41 AM, Justin Pettit <jpettit at nicira.com> wrote:
> > I can't reproduce any problem loading flows in the 1.9 release.  The flows you defined still won't match the nw_src and nw_dst, since you didn't specify matching IP packets.  Perhaps if you showed what you actually ran, the contents of the file, and the output of the command, we might be able to help you more.
> >
> > --Justin
> >
> >
> > On Apr 26, 2013, at 10:11 PM, Prashant Chougule <chougulepavan at gmail.com> wrote:
> >
> > > same problem with these flows also ,
> > > unknown keyword priority when ./ovs-ofctl add-flow br0 file
> > >
> > >  1 priority=60008,in_port=1,idle_timeout=0,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
> > >   2 priority=60007,in_port=1,idle_timeout=0,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
> > >   3 priority=60006,in_port=1,idle_timeout=0,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
> > >   4 priority=60005,in_port=1,idle_timeout=0,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
> > >   5 priority=60004,in_port=1,idle_timeout=0,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
> > >   6 priority=60003,in_port=1,idle_timeout=0,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
> > >   7 priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
> > >   8 priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
> > >   9 priority=60001,in_port=1,idle_timeout=0,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
> > >  10 priority=60000,in_port=1,idle_timeout=0,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
> > >
> > >  above flows not working, do i need to add some masking to abve i am using ovs-1.9.0 ?
> > >
> > > i try with other file with 10 flows like given one it, its working,it showing me in table.
> > >
> > >  priority=60000,idle_timeout=50000,dl_type=0x0806,nw_src=192.168.1.9,nw_dst=192.168.1.15,table=20,dl_dst=b8:70:f4:a    8:a3:34,dl_src=e8:40:f2:3c:ad:93,nw_proto=1,actions=output:1
> > >
> > >
> > > On Sat, Apr 27, 2013 at 10:09 AM, Justin Pettit <jpettit at nicira.com> wrote:
> > > Most of the priority definitions don't look wrong, but here are a few things:
> > >
> > >         - You can't specify a priority over 65535 (I see a 65536 in there), since it's expecting a 16-bit value.
> > >         - Your dl_type won't work with your nw_src and nw_dst definitions, since it's not an IP ethertype.
> > >         - I'm not sure it's in your file, but you can't put numbers before your flow definitions.
> > >         - I'd use "ovs-ofctl add-flows <file>", since that's closer to what you want to do.
> > >
> > > --Justin
> > >
> > > On Apr 26, 2013, at 8:45 PM, Prashant Chougule <chougulepavan at gmail.com> wrote:
> > >
> > > > hi,
> > > >
> > > > I am trying to add file with 1000 rules, it will give me unknown keyword priority as a error if push individual flow it is working,
> > > > some of the rules from the file
> > > >
> > > >
> > > >    1 priority=65536,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2
> > > >   2 priority=60001,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2
> > > >   3 priority=60002,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2
> > > >   4 priority=60003,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2
> > > >   5 priority=60004,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2
> > > >   6 priority=60005,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2
> > > >   7 priority=60006,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2
> > > >   8 priority=60007,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2
> > > >   9 priority=60008,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2
> > > >  10 priority=60009,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2
> > > >  it is standard rule set i put it in openflow format,
> > > > try with ./ovs-ofctl add-flow br0 -<file it show me ovs-ofctl: unknown keyword priority. is their any wrong in my syntax?
> > > >
> > > > --
> > > > Thanks &Regards,
> > > > Prashant Chougule.
> > > > _______________________________________________
> > > > discuss mailing list
> > > > discuss at openvswitch.org
> > > > http://openvswitch.org/mailman/listinfo/discuss
> > >
> > >
> > >
> > >
> > > --
> > > Thanks &Regards,
> > > Prashant Chougule.
> >
> >
> >
> >
> > --
> > Thanks &Regards,
> > Prashant Chougule.
> 
> 
> 
> 
> -- 
> Thanks &Regards,
> Prashant Chougule.