[ovs-discuss] problem with gre-tunnel

[Prashant Chougule]

do i need to add route for br1 as per above example, because in my route
table gateway is 0.0.0.0 for both bridges.


On Fri, Aug 2, 2013 at 10:41 AM, Alex Wang <alexw at nicira.com> wrote:

> Hey Prashant,
>
> I just repeated your configuration on two machines. And it works.
>
> My ovs is the master branch from here:
> http://git.openvswitch.org/cgi-bin/gitweb.cgi?p=openvswitch;a=summary
>
> """
> # eth1 on two machines are directly connected
> # eth1 on machine1 has address 2.2.2.2
> # eth1 on machine2 has address 2.2.2.3
> # Below is the script on machine1:
> vs-vsctl add-br br0 -- add-port br0 eth1
> sudo  ifconfig br0 2.2.2.2 netmask 255.255.255.0
> sudo  ifconfig eth1 0 up
> ovs-vsctl add-br br1
> sudo  ifconfig br1 11.11.11.25 netmask 255.255.255.0
> ovs-vsctl add-port br1 gre0 -- set interface gre0 type=gre
> options:remote_ip=2.2.2.2
> """
> Is this the same as yours? If it is, seems to be caused by other misconfig.
> And you may need to use commands like tcpdump, ovs-dpctl dump-flows, route
> for debugging.
> You may refer to this thread for ways of debugging:
> http://openvswitch.org/pipermail/discuss/2013-July/010440.html
>
> Kind Regards,
> Alex Wang,
>



-- 
Thanks &Regards,
Prashant Chougule.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20130802/8a037253/attachment.html>