[ovs-discuss] do the openvswitch support hybrid port ? if yes, how to config the hybrid port ?
Ben Pfaff
blp at nicira.com
Fri Mar 8 16:07:07 UTC 2013
On Fri, Mar 08, 2013 at 01:59:34PM +0800, ????????? wrote:
> ??? 2013???03???08??? 12:52, Ben Pfaff ??????:
> >On Fri, Mar 08, 2013 at 09:13:57AM +0800, ????????? wrote:
> >>??? 2013???03???08??? 03:16, Ben Pfaff ??????:
> >>>On Thu, Mar 07, 2013 at 01:58:49PM +0800, ????????? wrote:
> >>>>Q:do the openvswitch support hybrid port ? if yes,how to config the
> >>>>hybrid port ?
> >>>What's a hybrid port?
> >>A bybrid port resembles a trunk port,with the exception that it can
> >>determine a packet that egresses on a hybrid port in the PVID of the
> >>byhrid port will an 802.1Q header or not.just with the support of
> >>trunk port,when I config the port will access or trunk,I don't know
> >>how to let the guests to connect to the external network without a
> >>layer-3 device.
> >I don't understand this description, but the concept appears to be
> >related to PVLANs. Open vSwitch doesn't implement PVLANs.
> thanks ben,can you help me to resolve the question below?
This question also appears to concern pvids, which Open vSwitch does not
support. The diagram is illegible.
>
> ---------------
> | router |
> ---------------
> 192.168.2.254/24 | p1
> --------------------------------------
> | physical
> switch |
> --------------------------------------
> | p2
> | p3
> ------------------ ----------
> | |
> --------------------------------------
> ---------------------------------------
> | | eth0 | |
> | | eth0 | |
> | ---------- |
> | ----------- |
> | | p4 |
> | | p5 |
> | ------------------------- | |
> ------------------------ |
> | | br0 | |
> | | br0 | |
> | ------------------------- | |
> ------------------------ |
> | | port1 | port2 | |
> | port3 | port4 |
> | ---------- ---------- |
> | ----------- ---------- |
> | | VM1 | | VM2 | | |
> | VM3 | | VM4 | |
> | ---------- ---------- |
> | ----------- ---------- |
> --------------------------------------
> ---------------------------------------
> VLAN100 VLAN200
> VLAN100 VLAN200
>
>
> ip(vm1):192.168.2.1/24
> ip(vm2):192.168.3.1/24
> ip(vm3):192.168.2.2/24
> ip(vm4):192.168.3.2/24
>
> p1,p2,p3,p4,p5 are trunk ports
> port1,port2,port3,port4 are access ports
>
> tag(port1,port3):100
> tag(port2,port4):200
>
> Ping from VM1 to VM3, this should succeed.
> Ping from VM2 to VM4, this should succeed.
>
> but Ping from VM1 to 192.168.2.254, failed.so,i changed the pvid of
> p1 to 100,then Ping from VM1 to 192.168.2.254 succeed,but Ping from
> VM2 to 192.168.2.254 failed.
> i don't how to let the VM2 and VM1 ping to 192.168.2.254 successfully.
> if you have ideas,please tell ,thanks again.
>
>
>
> --
>
> ???????????????
>
> ?????????
More information about the discuss
mailing list