[ovs-discuss] Limiting bandwidth interface

[ashish yadav]

Hi Pedro,

As you said, "ingress_policing_rate" worked well for u.
If you have tried it with VLAN+Bridge ?

Thanks & Regards
   Ashish


On Thu, Sep 12, 2013 at 7:47 PM, Pedro Henrique
<phamorimrezende at gmail.com>wrote:

> Hello.
> I'm trying to limit the bandwidth of the interface, I used the
> "ingress_policing_rate"(as described in this link:
> http://openvswitch.org/support/config-cookbooks/qos-rate-limiting/) and
> it worked well. But I'm trying to find a way to limit the bandwidth based
> on the flow, for example, src ip: 10.0.0.1, dest ip: 10.0.0.2,* port 80*,
> *bandwidth: 5 Mbps*; and src ip: 10.0.0.1, dest ip: 10.0.0.2, *port: 21*,
> *bandwitdth: 10Mbps*. Is there a way to define the bandwidth based on the
> port or any other parameter?
> I also saw the queue, but the problem is that the queue is only put on the
> egress interface and I'm trying to filter the traffic on the ingress
> interface.
>
> For example,
>
> Host1-----------SW---------Host2
>               eth1     eth2
>
>
> I want to filter the traffic on eth1.
>
> Thank you for the attention.
>
> _______________________________________________
> discuss mailing list
> discuss at openvswitch.org
> http://openvswitch.org/mailman/listinfo/discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20130913/5ff6da08/attachment.html>