[ovs-discuss] configure qos using patch ports

[Gurucharan Shetty]

I don't understand what you mean, you will have to elaborate.

On Thu, Apr 30, 2015 at 9:02 AM, abhishek jain <ashujain9727 at gmail.com> wrote:
> Hi Gurucharan
>
> Thanks for the reply.
> Eth1 and eth2 are on same machine.I'm able to configure qos for the output
> port through veth pair
>
> On Apr 30, 2015 9:23 PM, "Gurucharan Shetty" <shettyg at nicira.com> wrote:
>>
>> Removing floodlight-dev as I do not subscribe to that mailing list.
>>
>> How are eth1 and eth2 on 2 different machines (based on the diagram)
>> connected via  a patch port?
>> If "br0" and "br1" are on a single machine, and "eth1" and "eth2" are
>> OVS virtual ports, you cannot add QoS to them.
>>
>> On Wed, Apr 29, 2015 at 9:55 AM, abhishek jain <ashujain9727 at gmail.com>
>> wrote:
>> > Hi
>> >
>> > I need to configure OVS queues using OVS patch ports.Below is the
>> > setup..
>> >
>> >
>> >
>> > ---------------------------------------------------------------------------------------------------------------------------
>> > |                                                            192.168.1.1
>> > |                ____________                      ______________
>> > |               |       br0          |  patch-port    |           br1
>> > |
>> > |               |               eth1| --------------------| eth2
>> > |
>> > |               |_eth0________|                    |_________eth3__|
>> >                   /
>> > \
>> >                  /
>> > \
>> >                 /
>> > \
>> >                /
>> > \
>> >             Laptop-1
>> > Laptop-2
>> >             IP-192.168.1.100
>> > IP-192.168.1.11
>> >
>> >
>> > I'm able to ping Laptop-1 and Laptop-2 but not able to achieve rate
>> > limit
>> > when I'm applying QOS policy at port eth1 of br0.
>> > I'm using below command..
>> >
>> > ovs-vsctl set port eth1 qos=@newqos -- --id=@newqos create qos
>> > type=linux-htb queues=0=@q0,1=@q1 -- --id=@q0 create queue
>> > other-config:min-rate=1000000 other-config:max-rate=1000000 -- --id=@q1
>> > create queue other-config:min-rate=3000000 other-config:max-rate=300000
>> > 0
>> >
>> >
>> > _______________________________________________
>> > discuss mailing list
>> > discuss at openvswitch.org
>> > http://openvswitch.org/mailman/listinfo/discuss
>> >