[ovs-discuss] BUG

Ben Pfaff blp at nicira.com
Wed Feb 18 17:29:42 UTC 2015


Do you have a specific question?

On Wed, Feb 18, 2015 at 10:57:49PM +0530, jayakeerthi k wrote:
> gone through that link it explain only how to install libvirt.
> it is not help full to resolve my issue.
> 
> 
> On Wed, Feb 18, 2015 at 10:45 PM, Ben Pfaff <blp at nicira.com> wrote:
> 
> > Since you are using libvirt, please read INSTALL.Libvirt.md.
> >
> > On Wed, Feb 18, 2015 at 10:43:54PM +0530, jayakeerthi k wrote:
> > > i'm following the steps in below link
> > >
> > http://git.openvswitch.org/cgi-bin/gitweb.cgi?p=openvswitch;a=blob_plain;f=INSTALL.KVM;hb=HEAD
> > > .
> > > and i installed libvirt (sudo apt-get install libvirt-bin)
> > > how KVM creates the interfaces??
> > >
> > > On Wed, Feb 18, 2015 at 10:19 PM, Ben Pfaff <blp at nicira.com> wrote:
> > >
> > > > Please don't drop the list.
> > > >
> > > > KVM creates the interfaces, then you add them to a bridge.  Creating
> > > > internal interfaces isn't going to do what you want, because those
> > > > interfaces won't be used by the VM.
> > > >
> > > > Did you read INSTALL.Libvirt.md?
> > > >
> > > > On Wed, Feb 18, 2015 at 10:18:09PM +0530, jayakeerthi k wrote:
> > > > > Hi,
> > > > > then how to create the openvswitch interfaces to connect to the
> > VM's. But
> > > > > it works fine with above method.
> > > > > i'm creating the vm with virt-manager(kvm-qemu) and when i give the
> > > > > specified shared name i could not able to create the vm. it says that
> > > > > unable to add vneto port on the bridge.
> > > > >
> > > > > ovs-vsctl add-port br3 vport1--  port created this way is not shown
> > in
> > > > the
> > > > > available interfaces.
> > > > > please suggest any resources regarding this.
> > > > >
> > > > > Thanking you,
> > > > > Jayakeerthi k
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Feb 18, 2015 at 9:38 PM, Ben Pfaff <blp at nicira.com> wrote:
> > > > >
> > > > > > On Wed, Feb 18, 2015 at 03:25:33PM +0530, jayakeerthi k wrote:
> > > > > > > I installed openvswitch and i could able to add port and connect
> > it
> > > > to vm
> > > > > > > on KVM  only when the port created in the following way.
> > > > > > > ovs-vsctl add-port br3 vport1 -- set interface vport1
> > type=internal.
> > > > > > >
> > > > > > > is the correct way of creating port and connecting it the vm.
> > > > > >
> > > > > > No.  VM interfaces aren't "internal".
> > > > > >
> > > > > > > Also when i connect it the controller (ODL) . It shows many hosts
> > > > which
> > > > > > are
> > > > > > > not really connected particular port i created.
> > > > > >
> > > > > > It's hard to tell what you mean.
> > > > > >
> > > >
> >



More information about the discuss mailing list