[ovs-discuss] Linear topology in openveswitch
AMER
amer7777 at hotmail.com
Wed Mar 11 12:08:24 UTC 2015
Hello,
I have solved this issue, Thank, however, I would like to ask you about the following command:
ovs-ofctl add-flows br0 table=1, priority=99, dl_type=0x800, nw_src=192.168.5.2, actions=mod_nw_src=10.10.10.10, resubmit(,2)
I received the following error
bash syntax error near unexpected token '('
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
From: amer7777 at hotmail.com
To: shettyg at nicira.com
Date: Wed, 11 Mar 2015 09:06:17 +0000
CC: discuss at openvswitch.org
Subject: Re: [ovs-discuss] Linear topology in openveswitch
Hello,
I did the following configurations in my VBox, however, I can't ping the host machine "192.168.5.2"
ovs-vsctl add-br
br0
ovs-vsctl add-port br0 eth0
ovs-vsctl add-port br0 eth1
Ifconfig eth0 0
Ifconfig br0 192.168.5.1 netmask 255.255.255.0
Best regards,
Eng Amer Alghadhban
COE
SANS-GCFW
CEH, SCNP, CCNA
> Date: Tue, 10 Mar 2015 07:19:28 -0700
> Subject: Re: [ovs-discuss] Linear topology in openveswitch
> From: shettyg at nicira.com
> To: amer7777 at hotmail.com
> CC: discuss at openvswitch.org
>
> On Tue, Mar 10, 2015 at 1:02 AM, Amer <amer7777 at hotmail.com> wrote:
> > Hello,
> >
> > Thank you for your message,
> > I think I can use only one bridge and the configuration will be:
> >
> > ovs-vsctl add-br br0
> >
> > ovs-vsctl add-port br0 eth0
> >
> > ovs-vsctl add-port br0 eth1
> That should work too. But in this case, you will only have one IP
> address per VM. Eitherway (one bridge or patch ports), be careful
> about loops.
_______________________________________________
discuss mailing list
discuss at openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20150311/25cd10e5/attachment-0002.html>
More information about the discuss
mailing list