[ovs-discuss] Query on ovs Vxlan setup

[Yogesh Pandey1/HYD/TCS]

Hi All, 

To test NSH feature in ovs (using custom ovs), I am trying to configure VxLan Tunnel between two hypervisors each running one VM using these commands. But whenever I provide an ip to br1 the internet connectivity to my host is lost. Also Vxlan with nsh shows up in the ovs-vsctl show command but VMs are not able to ping each other on different hosts. 

On Host 1 
#ovs Setup 
ovs-vsctl add-br br0 
ovs-vsctl add-br br1 
ovs-vsctl add-port br0 eth0 
ifconfig eth0 0 && ifconfig br0 192.168.1.3 netmask 255.255.255.0 
route add default gw 192.168.1.1 br0 
ifconfig br1 10.1.2.10 netmask 255.255.255.0 

#configuring VxLan 
sudo ovs-vsctl add-port br1 vxlan1 -- set interface vxlan1 type=vxlan options:remote_ip=192.168.1.4 options:key=0x5000 options:nsp=0x123456 options:nsi=44 options:npc=0x22000000 options:nsc=0x33000000 options:spc=0x44000000 options:ssc=0x5500000 


-- 
Thanks and regards, 
Yogesh Pandey 
Mailto:yogesh.pandey1 at tcs.com 
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain 
confidential or privileged information. If you are 
not the intended recipient, any dissemination, use, 
review, distribution, printing or copying of the 
information contained in this e-mail message 
and/or attachments to it are strictly prohibited. If 
you have received this communication in error, 
please notify us by reply e-mail or telephone and 
immediately and permanently delete the message 
and any attachments. Thank you


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20150317/156fc183/attachment-0002.html>