[ovs-discuss] OVN Questions

Justin Pettit jpettit at ovn.org
Thu Apr 28 03:50:40 UTC 2016


You need to run "make sandbox" as shown in the presentation. It doesn't matter if you run just "make" first. 

I noticed if I copied and pasted from those slides it didn't work properly because the quotes were stylized and not standard. However since you still haven't shown the output that I've requested a couple of times, I can't say for sure. 

--Justin


> On Apr 27, 2016, at 8:32 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
> 
> Hi Justin,
> 
> In the link "http://benpfaff.org/~blp/ovn-lbnl.pdf", there is a slide titled as "Test #1 - ovs-sandbox". Based on this slide, I followed these steps
> 
> 1: git clone http://github.com/openvswitch/ovs.git
> 2: cd ovs
> 3a:  ./boot.sh
> 3b: ./configure
> 3c: make
> 4: make sandbox SANDBOXFLAGS="--ovn"
> 
> Should I have done "make sandbox", instead of "make" in step "3c" above. These slides may be old, so I may be missing some important step.
> 
> Thanks
> Maurice
> 
> -----Original Message-----
> From: Justin Pettit [mailto:jpettit at ovn.org] 
> Sent: Wednesday, April 27, 2016 3:02 PM
> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
> Cc: discuss at openvswitch.org
> Subject: Re: [ovs-discuss] OVN Questions
> 
> It doesn't look like it got started properly. Can you provide all the output starting from when you type "make sandbox"?
> 
> --Justin
> 
> 
>> On Apr 27, 2016, at 4:53 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>> 
>> Hi Justin,
>> 
>> Below is the output of echo $PATH. The output of "make sandbox" is attached.
>> 
>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ echo $PATH 
>> /tools/sw/exa_2.0/exa-tools:/usr/lib64/ccache:/usr/local/bin:/usr/bin:
>> /bin:/usr/local/sbin:/usr/sbin:/home/mqureshi/bin:/sbin
>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$
>> 
>> Thanks
>> Maurice
>> 
>> -----Original Message-----
>> From: Justin Pettit [mailto:jpettit at ovn.org]
>> Sent: Wednesday, April 27, 2016 10:58 AM
>> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
>> Cc: discuss at openvswitch.org
>> Subject: Re: [ovs-discuss] OVN Questions
>> 
>> Can you show all the commands and output from when you run "make sandbox"? Also, what does "echo $PATH" show when running in the sanbox shell?
>> 
>> --Justin
>> 
>> 
>>> On Apr 27, 2016, at 12:37 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>>> 
>>> Hi Justin,
>>> 
>>> None of the ovn- commands are available.
>>> 
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$  ovn-nbctl lswitch-add sw0
>>> ovn-nbctl: command not found
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ whereis  ovn-nbctl
>>> ovn-nbctl:
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ which ovn-nbctl 
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$
>>> 
>>> -----Original Message-----
>>> From: Justin Pettit [mailto:jpettit at ovn.org]
>>> Sent: Tuesday, April 26, 2016 10:51 PM
>>> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
>>> Cc: discuss at openvswitch.org
>>> Subject: Re: [ovs-discuss] OVN Questions
>>> 
>>> 
>>>> On Apr 26, 2016, at 8:16 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>>>> 
>>>> Have following questions on OVN
>>>> 
>>>> 1.      Tried to use the ovs sandbox as described in http://benpfaff.org/~blp/ovn-lbnl.pdf. Got following message, but the commands like ovn-nbctl are failing. Both OVN daemons (ovn-northd and ovn-controller) are running in addition to ovn-controller-vtep. I am using Ubuntu 14.04 LTS
>>> 
>>> What error are you seeing?  I checked out the latest code, and it works for me.
>>> 
>>> --Justin
>> 
>> <make_sandbox.txt>
> 




More information about the discuss mailing list