[ovs-discuss] OVN Questions
Maurice Qureshi
Maurice.Qureshi at calix.com
Thu Apr 28 18:59:24 UTC 2016
Below is the output of "make sandbox" from the time when I typed "make sandbox SANDBOXFLAGS="--ovn". Do I need to turn on some other flag also to make it more verbose.
mqureshi at vmexa-mqureshi:~/ovs$ make sandbox SANDBOXFLAGS="--ovn"
make all-recursive
make[1]: Entering directory `/home/mqureshi/ovs'
Making all in datapath
make[2]: Entering directory `/home/mqureshi/ovs/datapath'
make[3]: Entering directory `/home/mqureshi/ovs/datapath'
make[3]: Leaving directory `/home/mqureshi/ovs/datapath'
make[2]: Leaving directory `/home/mqureshi/ovs/datapath'
make[2]: Entering directory `/home/mqureshi/ovs'
make[3]: Entering directory `/home/mqureshi/ovs/datapath'
make[3]: `distfiles' is up to date.
make[3]: Leaving directory `/home/mqureshi/ovs/datapath'
make[2]: Leaving directory `/home/mqureshi/ovs'
make[1]: Leaving directory `/home/mqureshi/ovs'
cd ./tutorial && MAKE=make ./ovs-sandbox -b /home/mqureshi/ovs --ovn
make[1]: Entering directory `/home/mqureshi/ovs'
/bin/mkdir -p '/home/mqureshi/ovs/tutorial/sandbox/man/man1'
/usr/bin/install -c -m 644 utilities/ovs-pcap.1 utilities/ovs-tcpundump.1 ovsdb/ovsdb-tool.1 ovsdb/ovsdb-client.1 ovsdb/ovsdb-server.1 '/home/mqureshi/ovs/tutorial/sandbox/man/man1'
/bin/mkdir -p '/home/mqureshi/ovs/tutorial/sandbox/man/man5'
/usr/bin/install -c -m 644 vswitchd/ovs-vswitchd.conf.db.5 vtep/vtep.5 ovn/ovn-sb.5 ovn/ovn-nb.5 '/home/mqureshi/ovs/tutorial/sandbox/man/man5'
/bin/mkdir -p '/home/mqureshi/ovs/tutorial/sandbox/man/man7'
/usr/bin/install -c -m 644 ovn/ovn-architecture.7 '/home/mqureshi/ovs/tutorial/sandbox/man/man7'
/bin/mkdir -p '/home/mqureshi/ovs/tutorial/sandbox/man/man8'
/usr/bin/install -c -m 644 utilities/ovs-appctl.8 utilities/ovs-ctl.8 utilities/ovs-testcontroller.8 utilities/ovs-dpctl.8 utilities/ovs-dpctl-top.8 utilities/ovs-l3ping.8 utilities/ovs-ofctl.8 utilities/ovs-parse-backtrace.8 utilities/ovs-pki.8 utilities/ovs-vlan-bug-workaround.8 utilities/ovs-test.8 utilities/ovs-vlan-test.8 utilities/ovs-vsctl.8 utilities/bugtool/ovs-bugtool.8 vswitchd/ovs-vswitchd.8 vtep/vtep-ctl.8 ovn/controller/ovn-controller.8 ovn/controller-vtep/ovn-controller-vtep.8 ovn/northd/ovn-northd.8 ovn/utilities/ovn-ctl.8 ovn/utilities/ovn-nbctl.8 ovn/utilities/ovn-sbctl.8 '/home/mqureshi/ovs/tutorial/sandbox/man/man8'
make[1]: Leaving directory `/home/mqureshi/ovs'
----------------------------------------------------------------------
You are running in a dummy Open vSwitch environment. You can use
ovs-vsctl, ovs-ofctl, ovs-appctl, and other tools to work with the
dummy switch.
This environment also has the OVN daemons and databases enabled.
You can use ovn-nbctl and ovn-sbctl to interact with the OVN databases.
Log files, pidfiles, and the configuration database are in the
"sandbox" subdirectory.
Exit the shell to kill the running daemons.
mqureshi at vmexa-mqureshi:~/ovs/tutorial
-----Original Message-----
From: Justin Pettit [mailto:jpettit at ovn.org]
Sent: Wednesday, April 27, 2016 8:51 PM
To: Maurice Qureshi <Maurice.Qureshi at calix.com>
Cc: discuss at openvswitch.org
Subject: Re: [ovs-discuss] OVN Questions
You need to run "make sandbox" as shown in the presentation. It doesn't matter if you run just "make" first.
I noticed if I copied and pasted from those slides it didn't work properly because the quotes were stylized and not standard. However since you still haven't shown the output that I've requested a couple of times, I can't say for sure.
--Justin
> On Apr 27, 2016, at 8:32 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>
> Hi Justin,
>
> In the link "http://benpfaff.org/~blp/ovn-lbnl.pdf", there is a slide
> titled as "Test #1 - ovs-sandbox". Based on this slide, I followed
> these steps
>
> 1: git clone http://github.com/openvswitch/ovs.git
> 2: cd ovs
> 3a: ./boot.sh
> 3b: ./configure
> 3c: make
> 4: make sandbox SANDBOXFLAGS="--ovn"
>
> Should I have done "make sandbox", instead of "make" in step "3c" above. These slides may be old, so I may be missing some important step.
>
> Thanks
> Maurice
>
> -----Original Message-----
> From: Justin Pettit [mailto:jpettit at ovn.org]
> Sent: Wednesday, April 27, 2016 3:02 PM
> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
> Cc: discuss at openvswitch.org
> Subject: Re: [ovs-discuss] OVN Questions
>
> It doesn't look like it got started properly. Can you provide all the output starting from when you type "make sandbox"?
>
> --Justin
>
>
>> On Apr 27, 2016, at 4:53 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>>
>> Hi Justin,
>>
>> Below is the output of echo $PATH. The output of "make sandbox" is attached.
>>
>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ echo $PATH
>> /tools/sw/exa_2.0/exa-tools:/usr/lib64/ccache:/usr/local/bin:/usr/bin:
>> /bin:/usr/local/sbin:/usr/sbin:/home/mqureshi/bin:/sbin
>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$
>>
>> Thanks
>> Maurice
>>
>> -----Original Message-----
>> From: Justin Pettit [mailto:jpettit at ovn.org]
>> Sent: Wednesday, April 27, 2016 10:58 AM
>> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
>> Cc: discuss at openvswitch.org
>> Subject: Re: [ovs-discuss] OVN Questions
>>
>> Can you show all the commands and output from when you run "make sandbox"? Also, what does "echo $PATH" show when running in the sanbox shell?
>>
>> --Justin
>>
>>
>>> On Apr 27, 2016, at 12:37 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>>>
>>> Hi Justin,
>>>
>>> None of the ovn- commands are available.
>>>
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ ovn-nbctl lswitch-add sw0
>>> ovn-nbctl: command not found
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ whereis ovn-nbctl
>>> ovn-nbctl:
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$ which ovn-nbctl
>>> mqureshi at vmexa-mqureshi:~/ovs/tutorial$
>>>
>>> -----Original Message-----
>>> From: Justin Pettit [mailto:jpettit at ovn.org]
>>> Sent: Tuesday, April 26, 2016 10:51 PM
>>> To: Maurice Qureshi <Maurice.Qureshi at calix.com>
>>> Cc: discuss at openvswitch.org
>>> Subject: Re: [ovs-discuss] OVN Questions
>>>
>>>
>>>> On Apr 26, 2016, at 8:16 PM, Maurice Qureshi <Maurice.Qureshi at calix.com> wrote:
>>>>
>>>> Have following questions on OVN
>>>>
>>>> 1. Tried to use the ovs sandbox as described in http://benpfaff.org/~blp/ovn-lbnl.pdf. Got following message, but the commands like ovn-nbctl are failing. Both OVN daemons (ovn-northd and ovn-controller) are running in addition to ovn-controller-vtep. I am using Ubuntu 14.04 LTS
>>>
>>> What error are you seeing? I checked out the latest code, and it works for me.
>>>
>>> --Justin
>>
>> <make_sandbox.txt>
>
More information about the discuss
mailing list