[ovs-discuss] "netdev-dummy/receive" is not a valid command
Flaviof
flavio at flaviof.com
Tue May 24 23:14:11 UTC 2016
On Tue, May 24, 2016 at 7:06 PM, Thadeu Lima de Souza Cascardo <
cascardo at redhat.com> wrote:
> On Tue, May 24, 2016 at 06:24:21PM -0400, Flaviof wrote:
> > Hi folks,
> >
> > I'm trying to write a simple script to generate a packet into an existing
> > ovs interface (below). Instead of using "ovs-appctl ofproto/trace", I'm
> > attempting "ovs-appctl netdev-dummy/receive" so I can generate the raw
> > bytes, similar to what we have in the AT tests.
> >
> > Is "netdev-dummy/receive" something that did not exist in 2.0.2?
> > Any pointers on how one could use that functionality?
> > Maybe I could do this from an ovs sandbox?
>
> The dummy datapath is an OVS construct. You won't see dummy bridge and
> dummy
> ports as linux netdev interfaces. It is not at all related to the dummy
> linux
> driver.
>
>
heh, thanks for the clarification!
> If you want to inject packets using a different datapath, you can try
> OpenFlow
> packet out, using ovs-ofctl packet-out.
>
>
Ack! Will do!
It seems that using "ovs-appctl ofproto/trace brtest in_port=${inport}
$packet" is working too.
I was wrong to assume that "ofproto/trace" could not handle $packet as a
sring of hex values. Right now I'm having trouble seeing the packets in
wireshark (see below), but it is likely because I'm not setting the proper
checksum values. If so, that is 100% my fault. ;)
Thanks, Cascardo!!!
-- flaviof
[dell:ovsScripts.git] (master)$ ./sendIcmp.sh
+ test_ipv4_icmp_request dummy0 001122334455 000102030405 c0a83221 c0a837fe
+ local invif=dummy0 eth_src=001122334455 eth_dst=000102030405
ipv4_src=c0a83221 ipv4_dst=c0a837fe icmpv4_code=
+ local hdrchksum=0000
+ local icmp_seq=0001
+ local icmp_ts=02bb445700000000
+ local
icmp_data=000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
+ local
icmp_payload=080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
+ local
packet=0001020304050011223344550800450000540000400040010000c0a83221c0a837fe0035111100080000080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
+ inport=1
+ sudo ovs-appctl ofproto/trace brtest in_port=1
0001020304050011223344550800450000540000400040010000c0a83221c0a837fe0035111100080000080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
Packet:
icmp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:11:22:33:44:55,dl_dst=00:01:02:03:04:05,nw_src=192.168.50.33,nw_dst=192.168.55.254,nw_tos=0,nw_ecn=0,nw_ttl=64,icmp_type=0,icmp_code=53
Flow:
icmp,metadata=0,in_port=1,vlan_tci=0x0000,dl_src=00:11:22:33:44:55,dl_dst=00:01:02:03:04:05,nw_src=192.168.50.33,nw_dst=192.168.55.254,nw_tos=0,nw_ecn=0,nw_ttl=64,icmp_type=0,icmp_code=53
Rule: table=0 cookie=0 priority=0
OpenFlow actions=NORMAL
no learned MAC for destination, flooding
Final flow: unchanged
Relevant fields:
skb_priority=0,ip,in_port=1,vlan_tci=0x0000/0x1fff,dl_src=00:11:22:33:44:55,dl_dst=00:01:02:03:04:05,nw_frag=no
Datapath actions: 3,5
+ echo ok
ok
> Regards.
> Cascardo.
>
> >
> > Thanks,
> >
> > -- flaviof
> >
> > ---
> >
> > [dell:ovsScripts.git] (master)$ lsmod | grep dummy
> >
> > dummy 16384 0
> >
> > [dell:ovsScripts.git] (master)$
> >
> > [dell:ovsScripts.git] (master)$ sudo ovs-vsctl show
> >
> > c0006a18-e32c-44aa-9985-7641d61a74fc
> >
> > Bridge brtest
> >
> > Port brtest
> >
> > Interface brtest
> >
> > type: internal
> >
> > Port "dummy0"
> >
> > Interface "dummy0"
> >
> > ovs_version: "2.0.2"
> >
> > [dell:ovsScripts.git] (master)$
> >
> > [dell:ovsScripts.git] (master)$ ip a s dev dummy0
> >
> > 13: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master
> > ovs-system state UNKNOWN group default
> >
> > link/ether 00:01:02:03:04:05 brd ff:ff:ff:ff:ff:ff
> >
> > inet 192.168.55.254/24 scope global dummy0
> >
> > valid_lft forever preferred_lft forever
> >
> > inet6 fe80::d074:13ff:fe2f:26d3/64 scope link
> >
> > valid_lft forever preferred_lft forever
> >
> > [dell:ovsScripts.git] (master)$
> >
> > [dell:ovsScripts.git] (master)$
> >
> > [dell:ovsScripts.git] (master)$ cat sendIcmp.sh
> >
> > #!/bin/bash
> >
> >
> > ip_to_hex() {
> >
> > printf "%02x%02x%02x%02x" "$@"
> >
> > }
> >
> >
> > test_ipv4_icmp_request() {
> >
> > local invif=$1 eth_src=$2 eth_dst=$3 ipv4_src=$4 ipv4_dst=$5
> > icmpv4_code=$6
> >
> > shift; shift; shift; shift; shift; shift
> >
> > # This packet has bad checksums but logical L3 routing doesn't check.
> >
> > local hdrchksum=0000
> >
> > local icmp_seq=0001
> >
> > local icmp_ts=02bb445700000000 ; # May/24/16 16:35:14 EDT
> >
> > local
> >
> icmp_data=000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
> > ; # 48 bytes
> >
> > local
> icmp_payload=0800${hdrchksum}5fbf${icmp_seq}${icmp_ts}${icmp_data}
> >
> > local
> >
> packet=${eth_dst}${eth_src}080045000054000040004001${hdrchksum}${ipv4_src}${ipv4_dst}0035111100080000${icmp_payload}
> >
> > sudo ovs-appctl netdev-dummy/receive $invif $packet
> >
> >
> >
> > }
> >
> >
> > eth_dst=000102030405
> > eth_src=001122334455
> > ip_src=$(ip_to_hex 192 168 50 33)
> > ip_dst=$(ip_to_hex 192 168 55 254)
> >
> > set -x
> >
> > test_ipv4_icmp_request dummy0 $eth_src $eth_dst $ip_src $ip_dst
> >
> > echo ok
> >
> >
> > [dell:ovsScripts.git] (master)$
> >
> > [dell:ovsScripts.git] (master)$ ./sendIcmp.sh
> >
> > + test_ipv4_icmp_request dummy0 001122334455 000102030405 c0a83221
> c0a837fe
> >
> > + local invif=dummy0 eth_src=001122334455 eth_dst=000102030405
> > ipv4_src=c0a83221 ipv4_dst=c0a837fe icmpv4_code=
> >
> > + local hdrchksum=0000
> >
> > + local icmp_seq=0001
> >
> > + local icmp_ts=02bb445700000000
> >
> > + local
> >
> icmp_data=000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
> >
> > + local
> >
> icmp_payload=080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
> >
> > + local
> >
> packet=0001020304050011223344550800450000540000400040010000c0a83221c0a837fe0035111100080000080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
> >
> > + sudo ovs-appctl netdev-dummy/receive dummy0
> >
> 0001020304050011223344550800450000540000400040010000c0a83221c0a837fe0035111100080000080000005fbf000102bb445700000000000102030405060708090001020304050607080900010203040506070809000102030405060708090001020304050607
> >
> > "netdev-dummy/receive" is not a valid command
> >
> > ovs-appctl: ovs-vswitchd: server returned an error
> >
> > + echo ok
> >
> > ok
> >
> > [dell:ovsScripts.git] (master)$
>
> > _______________________________________________
> > discuss mailing list
> > discuss at openvswitch.org
> > http://openvswitch.org/mailman/listinfo/discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openvswitch.org/pipermail/ovs-discuss/attachments/20160524/51ddea2f/attachment-0002.html>
More information about the discuss
mailing list