[ovs-discuss] [Question] how can I set debug log level
Ben Pfaff
blp at ovn.org
Tue Jun 27 21:33:13 UTC 2017
You can't choose to log just a single controller. You might use
"ovs-ofctl monitor <switch> watch:" to view the changes to a switch's
flow table.
On Tue, Jun 20, 2017 at 10:57:48AM +0800, Margin Hu wrote:
> both are ok , In facts , I prefer to disable the logging of controller.
>
>
> On 6/20 10:50, Ben Pfaff wrote:
> >On June 20, 2017 10:36:17 AM GMT+08:00, Margin Hu <jhu_com at qq.com> wrote:
> >
> > yes , how to do ?
> >
> >
> > On 6/20 10:28, Ben Pfaff wrote:
> >
> > Do you want to disable the logging or the controller? On Tue,
> > Jun 20, 2017 at 10:23:39AM +0800, Margin Hu wrote:
> >
> > thanks , you're right , I can capture the changement as
> > following:
> > 340483:2017-06-20T02:17:20.825Z|62030|vconn|DBG|unix:
> > received: OFPT_FLOW_MOD (xid=0x2): ADD actions=NORMAL
> > 340486:2017-06-20T02:17:20.825Z|62033|connmgr|INFO|provision<->unix:
> > 1 flow_mods in the last 0 s (1 adds)
> > 341089:2017-06-20T02:18:29.545Z|62376|vconn|DBG|unix:
> > received: NXT_FLOW_MOD_TABLE_ID (xid=0x2): enable
> > 341092:2017-06-20T02:18:29.545Z|62379|vconn|DBG|unix:
> > received: OFPT_FLOW_MOD (xid=0x4): ADD table:1
> > actions=NORMAL
> > 341095:2017-06-20T02:18:29.545Z|62382|connmgr|INFO|provision<->unix:
> > 1 flow_mods in the last 0 s (1 adds)
> > 341754:2017-06-20T02:19:35.742Z|62746|vconn|DBG|unix:
> > received: NXT_FLOW_MOD_TABLE_ID (xid=0x2): enable
> > 341757:2017-06-20T02:19:35.742Z|62749|vconn|DBG|unix:
> > received: OFPT_FLOW_MOD (xid=0x4): DEL table:1
> > actions=drop but the ovs-vswitchd.log is filled with
> > useless info such as:
> > 2017-06-20T02:21:31.658Z|63348|vconn|DBG|tcp:127.0.0.1:6633:
> > received: OFPST_PORT_DESC request (OF1.3)
> > (xid=0x61e993ec): port=ANY
> > 2017-06-20T02:21:31.658Z|63349|vconn|DBG|tcp:127.0.0.1:6633:
> > sent (Success): OFPST_PORT_DESC reply (OF1.3)
> > (xid=0x61e993ec): 1(bond0): addr:24:8a:07:55:41:e8 config:
> > 0 state: 0 speed: 0 Mbps now, 0 Mbps max 2(phy-provision):
> > addr:26:40:cc:43:82:5d config: 0 state: 0 speed: 0 Mbps
> > now, 0 Mbps max LOCAL(provision): addr:24:8a:07:55:41:e8
> > config: 0 state: 0 speed: 0 Mbps now, 0 Mbps max
> > "tcp:127.0.0.1:6633" seems is a controller, I don't know
> > what goodness after use it , do you know ? how can I
> > disable it ? On 6/20 9:52, Ben Pfaff wrote:
> >
> > On Tue, Jun 20, 2017 at 08:49:23AM +0800, Margin Hu
> > wrote:
> >
> > My openvswitch version is
> > openvswitch-2.6.1-4.1.git20161206.el7.x86_64 , can
> > you appoint out set which module for my target ?
> > [root at cloud-sz-master-b12-02 ~]# ovs-appctl vlog/list
> >
> > I suggest "ovs-appctl vlog/set vconn".
> >
> > --
> >------------------------------------------------------------------------
> > Margin Hu Love open source software mail: jhu_com at qq.com
> > github: http://www.github.com/todaygood
> > ------------------------------------------------------------------------
> >
> >
> >Which one?
>
> --
> ---------------------------------------------
> Margin Hu
> Love open source software
> mail: jhu_com at qq.com
> github: http://www.github.com/todaygood
> ---------------------------------------------
>
More information about the discuss
mailing list