[ovs-discuss] ovs-dpdk cannot add a dpdk mellanox port

Avi Cohen (A) avi.cohen at huawei.com
Mon Feb 19 15:22:52 UTC 2018


Olga
i'm familiar with the procedure. I can build dpdk 17.11 but has this compilation error in 17.08
Here https://community.mellanox.com/thread/3545  the answer to the same error  is to install another OFED - when I install this OFED, it breaks the build of 17.11 and 17.08
Best Regards
Avi


> -----Original Message-----
> From: Olga Shern [mailto:olgas at mellanox.com]
> Sent: Monday, 19 February, 2018 5:08 PM
> To: Avi Cohen (A); ovs-discuss at openvswitch.org
> Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> 
> Please refer to mlx5 DPDK guide: http://dpdk.org/doc/guides-
> 17.11/nics/mlx5.html
> 
> -----Original Message-----
> From: Avi Cohen (A) [mailto:avi.cohen at huawei.com]
> Sent: Monday, February 19, 2018 3:51 PM
> To: Olga Shern <olgas at mellanox.com>; ovs-discuss at openvswitch.org
> Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> 
> Olga
> Now I have compilation error
> /home/avi/dpdk-17.08/drivers/net/mlx5/mlx5_rxtx.h:46:32: fatal error:
> infiniband/mlx5_hw.h: No such file or directory
> 
> > -----Original Message-----
> > From: Avi Cohen (A)
> > Sent: Monday, 19 February, 2018 3:41 PM
> > To: 'Olga Shern'; ovs-discuss at openvswitch.org
> > Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> >
> > Ohh. - I've downgrade to 17.08 (from 17.11) and  forgot to set this flag .
> > checking now...
> >
> > > -----Original Message-----
> > > From: Olga Shern [mailto:olgas at mellanox.com]
> > > Sent: Monday, 19 February, 2018 3:26 PM
> > > To: Avi Cohen (A); ovs-discuss at openvswitch.org
> > > Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> > >
> > > Did you compile DPDK with mlx5 PMD enabled?
> > >
> > > -----Original Message-----
> > > From: Avi Cohen (A) [mailto:avi.cohen at huawei.com]
> > > Sent: Monday, February 19, 2018 3:20 PM
> > > To: Olga Shern <olgas at mellanox.com>; ovs-discuss at openvswitch.org
> > > Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> > >
> > > Thank you Olga
> > > I did specify the port name as ibv_devinfo output - but still I'm
> > > getting error
> > > msg:
> > >
> > >
> > > Feb 19 15:16:03 Pizza05 ovs-vsctl: ovs|00001|vsctl|INFO|Called as
> > > ovs-vsctl -- timeout 10 add-port br-phy dpdk0 -- set Interface dpdk0
> > > type=dpdk
> > > options:dpdk-devargs=mlx5_0 Feb 19 15:16:03 Pizza05 ovs-vswitchd[29371]:
> > > ovs|00044|dpdk|ERR|EAL: Unable to find a bus for the device 'mlx5_0'
> > > Feb 19 15:16:03 Pizza05 ovs-vswitchd[29371]:
> > > ovs|00045|netdev_dpdk|WARN|Error attaching device 'mlx5_0' to DPDK
> > > ovs|00045|Feb
> > > 19 15:16:03 Pizza05 ovs-vswitchd[29371]: ovs|00046|netdev|WARN|dpdk0:
> > > could not set configuration (Invalid argument
> > >
> > > Best Regards
> > > Avi
> > >
> > > > -----Original Message-----
> > > > From: Olga Shern [mailto:olgas at mellanox.com]
> > > > Sent: Monday, 19 February, 2018 2:58 PM
> > > > To: Avi Cohen (A); ovs-discuss at openvswitch.org
> > > > Subject: RE: ovs-dpdk cannot add a dpdk mellanox port
> > > >
> > > > Hi Avi,
> > > >
> > > > Please try the following command    ovs-vsctl --timeout 10 add-port br-
> phy
> > > > dpdk0   -- set Interface dpdk0 type=dpdk options:dpdk-devargs=mlx5_0
> > > >
> > > > You need to specify port name, mlx5_0 or mlx5_1 according
> > > > ibv_devinfo output
> > > >
> > > > Starting DPDK 18.02 and 17.11.2 you will be able to use PCI
> > > > address as OVS devargs parameters.
> > > >
> > > > Best Regards,
> > > > Olga
> > > >
> > > > -----Original Message-----
> > > > From: ovs-discuss-bounces at openvswitch.org [mailto:ovs-discuss-
> > > > bounces at openvswitch.org] On Behalf Of Avi Cohen (A)
> > > > Sent: Monday, February 19, 2018 2:33 PM
> > > > To: ovs-discuss at openvswitch.org
> > > > Subject: [ovs-discuss] ovs-dpdk cannot add a dpdk mellanox port
> > > >
> > > > Hi
> > > > I cannot add mellanox dpdk port - and  I don't find any reference
> > > > for this for new ovs versions I get  an error message when typing
> > > > this
> > command
> > > > ovs-vsctl --timeout 10 add-port br-phy dpdk0   -- set Interface dpdk0
> > > type=dpdk
> > > > options:dpdk-devargs=0000:04:00:0
> > > > I'm running:
> > > > Openvswitch 2.8.1 ; dpdk-17.08 ' mellanox - connectx-4
> > > >
> > > > Best Regards
> > > > Avi
> > > > _______________________________________________
> > > > discuss mailing list
> > > > discuss at openvswitch.org
> > > > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2
> > > > Fm
> > > > ai
> > > > l.op
> > > > envswitch.org%2Fmailman%2Flistinfo%2Fovs-
> > > >
> > >
> >
> discuss&data=02%7C01%7Colgas%40mellanox.com%7Cf91254be9a904a48d525
> > > >
> > >
> >
> 08d57794fdf6%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%7C0%7C636546
> > > >
> > >
> >
> 404170173730&sdata=eYSbGlSDbizK%2Fdz8CKpfiRQDj4mqnrKugSuYk5Fi2M4%3
> > > > D&reserved=0


More information about the discuss mailing list