[ovs-discuss] Bonded interface on ovs bridge configuration

[Chris Boley]

Hi, depending on your switch: for example a C!$C0 3560 or 3750 will often
can only use slow LACP negotiation and not fast negotiation. I’m not sure
if this might make any difference to your scenario.

On Tue, Jun 12, 2018 at 8:13 AM Tejali Bhujbal <tejalibhujbal at gmail.com>
wrote:

> Hi Guys ,
> I am trying to configure bonded interface on ovs bridge but somehow
> bonding doesn't up.
> can you see any mistake in my configuration?
>
>
> auto lo
> iface lo inet loopback
> dns-nameservers 129.241.0.200
> dns-search dev.iaas.ntnu.no mass
>
> # Bond enp7s0f0 and enp7s0f1 together
> allow-vmbr0 bond0
> iface bond0 inet static
>   ovs_bridge vmbr0
>   ovs_type OVSBond
>   ovs_bonds enp7s0f0 enp7s0f1
>   address 10.212.28.11/22
>   # Force the MTU of the physical interfaces to be jumbo-frame capable.
>   # This doesn't mean that any OVSIntPorts must be jumbo-capable.
>   # We cannot, however set up definitions for eth0 and eth1 directly due
>   # to what appear to be bugs in the initialization process.
>   pre-up ( ifconfig enp7s0f0 mtu 9000 && ifconfig enp7s0f1 mtu 9000 )
>   ovs_options bond_mode=balance-slb lacp=active other_config:lacp-time=fast
>   mtu 9000
>
> # Bridge for our bond and vlan virtual interfaces (our VMs will
> # also attach to this bridge)
> auto vmbr0
> allow-ovs vmbr0
> iface vmbr0 inet manual
>   ovs_type OVSBridge
>   # NOTE: we MUST mention bond0, vlan50, and vlan55 even though each
>   #       of them lists ovs_bridge vmbr0!  Not sure why it needs this
>   #       kind of cross-referencing but it won't work without it!
>   ovs_ports bond0 vlan1529 vlan1530
>   mtu 9000
>
> # Proxmox cluster communication vlan
> allow-vmbr0 vlan1529
> iface vlan1529 inet static
>   ovs_type OVSIntPort
>   ovs_bridge vmbr0
>   ovs_options tag=1529
>   ovs_extra set interface ${IFACE} external-ids:iface-id=$(hostname
> -s)-${IFACE}-vif
>   address 10.212.36.11
>   netmask 255.255.252.0
>   gateway 10.212.36.1
>   mtu 1500
>
> # Ceph cluster communication vlan (jumbo frames)
> allow-vmbr0 vlan1530
> iface vlan1530 inet static
>   ovs_type OVSIntPort
>   ovs_bridge vmbr0
>   ovs_options tag=1530
>   ovs_extra set interface ${IFACE} external-ids:iface-id=$(hostname
> -s)-${IFACE}-vif
>   address 10.212.40.11
>   netmask 255.255.252.0
>   mtu 9000
>
> auto eno1
> iface eno1 inet static
>     address 10.212.48.11/22
>     mtu 1500
>
> auto eno2
> iface eno2 inet manual
>     mtu 1500
>
> auto eno3
> iface eno3 inet manual
>     mtu 1500
>
> auto eno4
> iface eno4 inet manual
>     mtu 1500
>
>
>
>
>
>
>
>
>
>
> Kind regards
>
> Tejali Sonawane-Bhujbal
> Department Engineer - NTNU IT
> Byggteknisk, s-226, Gløshaugen
> Contact- +47-96708171
> _______________________________________________
> discuss mailing list
> discuss at openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openvswitch.org/pipermail/ovs-discuss/attachments/20180613/e3851a2b/attachment.html>