[ovs-discuss] Issue when using local_ip with VXLAN tunnels in OVS
Gregory Rose
gvrose8192 at gmail.com
Mon Nov 19 16:18:42 UTC 2018
On 11/19/2018 7:50 AM, Siva Teja ARETI wrote:
>
>
> On Fri, Nov 16, 2018 at 4:52 PM Gregory Rose <gvrose8192 at gmail.com
> <mailto:gvrose8192 at gmail.com>> wrote:
>
> On 11/6/2018 8:51 AM, Siva Teja ARETI wrote:
>> Hi Greg,
>>
>> Thanks for looking into this.
>>
>> I have two VMs in my setup each with two interfaces. Trying to
>> setup the VXLAN tunnels across these interfaces which are in
>> different subnets. A docker container is attached to ovs bridge
>> using ovs-docker utility on each VM and doing a ping from one
>> container to another.
>>
>> *VM1 details:*
>>
>> [root at vm1 ~]# ip a
>> .......
>> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 52:54:00:b8:05:be brd ff:ff:ff:ff:ff:ff
>> inet 30.30.0.59/24 <http://30.30.0.59/24> brd 30.30.0.255
>> scope global dynamic eth1
>> valid_lft 3002sec preferred_lft 3002sec
>> inet6 fe80::5054:ff:feb8:5be/64 scope link
>> valid_lft forever preferred_lft forever
>> 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 52:54:00:f0:64:37 brd ff:ff:ff:ff:ff:ff
>> inet 20.20.0.183/24 <http://20.20.0.183/24> brd 20.20.0.255
>> scope global dynamic eth2
>> valid_lft 3248sec preferred_lft 3248sec
>> inet6 fe80::5054:ff:fef0:6437/64 scope link
>> valid_lft forever preferred_lft forever
>> .......
>
> Hi Siva,
>
> I have a question. Are you able to ping between the two
> interfaces on VM1 with this command?:
>
> # ping 20.20.0.183 -I eth1
>
> thanks,
>
> - Greg
>
> Hi Greg,
>
> Sorry for the late reply.
>
> Yes, I am able to ping between two interfaces.
>
> [root at localhost ~]# ovs-appctl dpif/show
> system at ovs-system: hit:2799 missed:198775
> testbr0:
> a0769422cfc04_l 2/3: (system)
> testbr0 65534/1: (internal)
> vxlan0 10/2: (vxlan: local_ip=30.30.0.193,
> remote_ip=20.20.0.183)
> [root at localhost ~]# ping 20.20.0.183 -I 30.30.0.193
> PING 20.20.0.183 (20.20.0.183) from 30.30.0.193 : 56(84) bytes of data.
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=1 ttl=64
> time=0.470 ms
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=2 ttl=64
> time=0.657 ms
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=3 ttl=64
> time=0.685 ms
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=4 ttl=64
> time=0.721 ms
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=5 ttl=64
> time=0.630 ms
> 64 bytes from 20.20.0.183 <http://20.20.0.183>: icmp_seq=6 ttl=64
> time=0.629 ms
> ^C
Well that's probably where my setup isn't configured right. What is the
output of 'ip route' on that system?
Thanks,
- Greg
> --- 20.20.0.183 ping statistics ---
> 6 packets transmitted, 6 received, 0% packet loss, time 5000ms
> rtt min/avg/max/mdev = 0.470/0.632/0.721/0.079 ms
> [root at localhost ~]#
>
> Siva Teja.
>
>> [root at vm1 ~]# ovs-vsctl show
>> ff70c814-d1b0-4018-aee8-8b635187afee
>> Bridge "testbr0"
>> Port "gre0"
>> Interface "gre0"
>> type: gre
>> options: {local_ip="20.20.0.183", remote_ip="30.30.0.193"}
>> Port "testbr0"
>> Interface "testbr0"
>> type: internal
>> Port "2cfb62a9b0f04_l"
>> Interface "2cfb62a9b0f04_l"
>> ovs_version: "2.9.2"
>> [root at vm1 ~]# ip rule list
>> 0: from all lookup local
>> 32765: from 20.20.0.183 lookup siva
>> 32766: from all lookup main
>> 32767: from all lookup default
>> [root at vm1 ~]# ip route show table siva
>> default dev eth2 scope link src 20.20.0.183
>> [root at vm1 ~]# ######################### A docker container is
>> attached to ovs bridge using ovs-docker utility
>> [root at vm1 ~]# docker ps
>> CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
>> be4ab434db99 busybox "sh" 5 days ago Up 5 days admiring_euclid
>> [root at vm1 ~]# nsenter -n -t `docker inspect be4
>> --format={{.State.Pid}}` -- ip a
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
>> UNKNOWN qlen 1
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
>> valid_lft forever preferred_lft forever
>> inet6 ::1/128 scope host
>> valid_lft forever preferred_lft forever
>> 2: gre0 at NONE: <NOARP> mtu 1476 qdisc noop state DOWN qlen 1
>> link/gre 0.0.0.0 brd 0.0.0.0
>> 3: gretap0 at NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state
>> DOWN qlen 1000
>> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>> 9: eth0 at if10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UP qlen 1000
>> link/ether 22:98:41:0f:e8:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0
>> inet 70.70.0.10/24 <http://70.70.0.10/24> scope global eth0
>> valid_lft forever preferred_lft forever
>> inet6 fe80::2098:41ff:fe0f:e850/64 scope link
>> valid_lft forever preferred_lft forever
>>
>>
>> *VM2 details:*
>> *
>> *
>> [root at vm2 ~]# ip a
>> ........
>> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 52:54:00:79:ef:92 brd ff:ff:ff:ff:ff:ff
>> inet 30.30.0.193/24 <http://30.30.0.193/24> brd 30.30.0.255
>> scope global dynamic eth1
>> valid_lft 2406sec preferred_lft 2406sec
>> inet6 fe80::5054:ff:fe79:ef92/64 scope link
>> valid_lft forever preferred_lft forever
>> 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 52:54:00:05:93:7c brd ff:ff:ff:ff:ff:ff
>> inet 20.20.0.64/24 <http://20.20.0.64/24> brd 20.20.0.255
>> scope global dynamic eth2
>> valid_lft 2775sec preferred_lft 2775sec
>> inet6 fe80::5054:ff:fe05:937c/64 scope link
>> valid_lft forever preferred_lft forever
>> .......
>> [root at vm2 ~]# ovs-vsctl show
>> b85514db-3f29-4f7a-9001-37d70adfca34
>> Bridge "testbr0"
>> Port "gre0"
>> Interface "gre0"
>> type: gre
>> options: {local_ip="30.30.0.193", remote_ip="20.20.0.183"}
>> Port "a0769422cfc04_l"
>> Interface "a0769422cfc04_l"
>> Port "testbr0"
>> Interface "testbr0"
>> type: internal
>> ovs_version: "2.9.2"
>> [root at vm2 ~]# ip rule list
>> 0: from all lookup local
>> 32766: from all lookup main
>> 32767: from all lookup default
>> [root at vm2 ~]# ######################### A docker container is
>> attached to ovs bridge using ovs-docker utility
>> [root at vm2 ~]# docker ps
>> CONTAINER ID IMAGE COMMAND CREATED
>> STATUS PORTS NAMES
>> 86214f0d99e8 busybox:latest "sh" 5 days ago Up 5 days
>> peaceful_snyder
>> [root at vm2 ~]# nsenter -n -t `docker inspect 862
>> --format={{.State.Pid}}` -- ip a
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
>> UNKNOWN qlen 1
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
>> valid_lft forever preferred_lft forever
>> inet6 ::1/128 scope host
>> valid_lft forever preferred_lft forever
>> 2: gre0 at NONE: <NOARP> mtu 1476 qdisc noop state DOWN qlen 1
>> link/gre 0.0.0.0 brd 0.0.0.0
>> 3: gretap0 at NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state
>> DOWN qlen 1000
>> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>> 9: eth0 at if10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UP qlen 1000
>> link/ether ae:ac:14:7a:40:5f brd ff:ff:ff:ff:ff:ff link-netnsid 0
>> inet 70.70.0.20/24 <http://70.70.0.20/24> scope global eth0
>> valid_lft forever preferred_lft forever
>> inet6 fe80::acac:14ff:fe7a:405f/64 scope link
>> valid_lft forever preferred_lft forever
>>
>> With this configuration, if I do a ping from docker container on
>> VM1 to docker container on VM2 it works.
>>
>> [root at vm1 ~]# nsenter -n -t `docker inspect be4
>> --format={{.State.Pid}}` -- ping 70.70.0.20
>> PING 70.70.0.20 (70.70.0.20) 56(84) bytes of data.
>> 64 bytes from 70.70.0.20 <http://70.70.0.20>: icmp_seq=1 ttl=64
>> time=0.831 ms
>> 64 bytes from 70.70.0.20 <http://70.70.0.20>: icmp_seq=2 ttl=64
>> time=0.933 ms
>> 64 bytes from 70.70.0.20 <http://70.70.0.20>: icmp_seq=3 ttl=64
>> time=0.564 ms
>> ^C
>> --- 70.70.0.20 ping statistics ---
>> 3 packets transmitted, 3 received, 0% packet loss, time 2001ms
>> rtt min/avg/max/mdev = 0.564/0.776/0.933/0.155 ms
>>
>> And the traffic is as expected on VM2.
>>
>> [root at vm2 ~]# tcpdump -n -i any host 20.20.0.183
>> tcpdump: verbose output suppressed, use -v or -vv for full
>> protocol decode
>> listening on any, link-type LINUX_SLL (Linux cooked), capture
>> size 262144 bytes
>> 16:37:32.262553 IP 20.20.0.183 > 30.30.0.193
>> <http://30.30.0.193>: GREv0, length 102: IP 70.70.0.10 >
>> 70.70.0.20 <http://70.70.0.20>: ICMP echo request, id 28158, seq
>> 1, length 64
>> 16:37:32.262835 IP 30.30.0.193 > 20.20.0.183
>> <http://20.20.0.183>: GREv0, length 102: IP 70.70.0.20 >
>> 70.70.0.10 <http://70.70.0.10>: ICMP echo reply, id 28158, seq 1,
>> length 64
>> 16:37:33.263211 IP 20.20.0.183 > 30.30.0.193
>> <http://30.30.0.193>: GREv0, length 102: IP 70.70.0.10 >
>> 70.70.0.20 <http://70.70.0.20>: ICMP echo request, id 28158, seq
>> 2, length 64
>> 16:37:33.263374 IP 30.30.0.193 > 20.20.0.183
>> <http://20.20.0.183>: GREv0, length 102: IP 70.70.0.20 >
>> 70.70.0.10 <http://70.70.0.10>: ICMP echo reply, id 28158, seq 2,
>> length 64
>> 16:37:34.264159 IP 20.20.0.183 > 30.30.0.193
>> <http://30.30.0.193>: GREv0, length 102: IP 70.70.0.10 >
>> 70.70.0.20 <http://70.70.0.20>: ICMP echo request, id 28158, seq
>> 3, length 64
>> 16:37:34.264252 IP 30.30.0.193 > 20.20.0.183
>> <http://20.20.0.183>: GREv0, length 102: IP 70.70.0.20 >
>> 70.70.0.10 <http://70.70.0.10>: ICMP echo reply, id 28158, seq 3,
>> length 64
>>
>> But when I change the tunnel type to vxlan, ping fails.
>>
>> [root at vm1 ~]# ovs-vsctl del-port testbr0 gre0
>> [root at vm1 ~]# ovs-vsctl add-port testbr0 vxlan0 -- set interface
>> vxlan0 type=vxlan options:local_ip=20.20.0.183
>> options:remote_ip=30.30.0.193 options:dst_port=4789
>> [root at vm1 ~]# ovs-vsctl show
>> ff70c814-d1b0-4018-aee8-8b635187afee
>> Bridge "testbr0"
>> Port "testbr0"
>> Interface "testbr0"
>> type: internal
>> Port "vxlan0"
>> Interface "vxlan0"
>> type: vxlan
>> options: {dst_port="4789", local_ip="20.20.0.183",
>> remote_ip="30.30.0.193"}
>> Port "2cfb62a9b0f04_l"
>> Interface "2cfb62a9b0f04_l"
>> ovs_version: "2.9.2"
>>
>> [root at vm2 ~]# ovs-vsctl del-port testbr0 gre0
>> [root at vm2 ~]# ovs-vsctl add-port testbr0 vxlan0 -- set interface
>> vxlan0 type=vxlan options:local_ip=30.30.0.193
>> options:remote_ip=20.20.0.183 options:dst_port=4789
>> [root at vm2 ~]# ovs-vsctl show
>> b85514db-3f29-4f7a-9001-37d70adfca34
>> Bridge "testbr0"
>> Port "a0769422cfc04_l"
>> Interface "a0769422cfc04_l"
>> Port "vxlan0"
>> Interface "vxlan0"
>> type: vxlan
>> options: {dst_port="4789", local_ip="30.30.0.193",
>> remote_ip="20.20.0.183"}
>> Port "testbr0"
>> Interface "testbr0"
>> type: internal
>> ovs_version: "2.9.2"
>>
>> Ping fails with this setup
>>
>> [root at vm1 ~]# nsenter -n -t `docker inspect be4
>> --format={{.State.Pid}}` -- ping 70.70.0.20
>> PING 70.70.0.20 (70.70.0.20) 56(84) bytes of data.
>> ^C
>> --- 70.70.0.20 ping statistics ---
>> 6 packets transmitted, 0 received, 100% packet loss, time 4999ms
>>
>> Expected traffic is not seen on VM2
>>
>> [root at vm2 ~]# tcpdump -n -i any host 20.20.0.183
>> tcpdump: verbose output suppressed, use -v or -vv for full
>> protocol decode
>> listening on any, link-type LINUX_SLL (Linux cooked), capture
>> size 262144 bytes
>> ^C
>> 0 packets captured
>> 0 packets received by filter
>> 0 packets dropped by kernel
>>
>> Kindly let me know if you need more information.
>>
>> Siva Teja.
>>
>> On Tue, Nov 6, 2018 at 10:49 AM Gregory Rose
>> <gvrose8192 at gmail.com <mailto:gvrose8192 at gmail.com>> wrote:
>>
>>
>> On 11/5/2018 6:10 PM, Siva Teja ARETI wrote:
>>> Hi,
>>>
>>> I am trying to use local_ip option for a VXLAN tunnel using
>>> ovs but it does not seem to work. The same works when I use
>>> GRE tunnel. I also found a previous discussion from another
>>> user who tried the exact same approach. Here is the link to
>>> the discussion
>>>
>>> _https://www.mail-archive.com/ovs-discuss@openvswitch.org/msg03643.html_
>>>
>>> I am unable to find any working resolution at the end of
>>> this discussion. Could you please help?
>>
>> I looked into that but was never able to set up a
>> configuration like the one in that discussion and could
>> not repro the bug.
>>
>> Please provide some details on your usage, configuration and
>> steps to repro and I can look into it.
>>
>> Thanks,
>>
>> - Greg
>>
>>>
>>> I am using ovs 2.9.2
>>>
>>> [root at localhost ~]# ovs-vsctl --version
>>> ovs-vsctl (Open vSwitch) 2.9.2
>>> DB Schema 7.15.1
>>>
>>> Thanks,
>>> Siva Teja.
>>>
>>>
>>> _______________________________________________
>>> discuss mailing list
>>> discuss at openvswitch.org <mailto:discuss at openvswitch.org>
>>> https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openvswitch.org/pipermail/ovs-discuss/attachments/20181119/e09b1587/attachment-0001.html>
More information about the discuss
mailing list