[ovs-discuss] Controller + dot1Q trunk

Heim, Dennis Dennis.Heim at wwt.com
Wed Jul 3 23:59:56 UTC 2019

Is there a module that exists for that? 

Sent from my iPhone

> On Jul 3, 2019, at 7:58 PM, Ben Pfaff <blp at ovn.org> wrote:
>> On Wed, Jul 03, 2019 at 09:25:24PM +0000, Heim, Dennis wrote:
>> My topology is I have VLANs (10,11,12, 15) configured as access ports on the OvS. I also have a VLAN trunk terminating on my Cisco CSR1K. I have layer 3 interfaces on the CSR1Kv. When the OvS is standalone it works without a problem. However, when I connect it to the ONOS controller, pings do not reach the CSR1K. With some testing, it appears when connected to the controller, it is not sending the vlan tags. If I go to the CSR1Kv and configure VLAN10 as the native vlan, then VLAN 10 can ping the interface.
>> Is there something that has to be done when connected to a controller to get it to VLAN tag the traffic?
> If ONOS is controlling OVS, then it needs to implement the VLAN support
> itself.

More information about the discuss mailing list