[ovs-discuss] error: "could not add network device s1u to ofproto (Address family not supported by protocol)"

[tony yang]

I checked the default path and it is not there. I don’t know why cus I have
never change the default path

On Mon, Jun 14, 2021 at 19:26 Ben Pfaff <blp at ovn.org> wrote:

> On Mon, Jun 14, 2021 at 05:20:19PM +0100, tony yang wrote:
> > Dear all:
> >
> > I had a error when I run the ovs-gtp using the command sudo
> > ./1-setup-switch.sh
> >
> > yangtony1999 at yangtony1999:~/mosaic5g/ovs-gtp$ sudo ./1-setup-switch.sh
> > ovs-vsctl: Error detected while setting up 'edge': could not open network
> > device edge (File exists).  See ovs-vswitchd log for details.
> > ovs-vsctl: The default log directory is "/usr/local/var/log/openvswitch".
> > ovs-vsctl: Error detected while setting up 's1u': could not add network
> > device s1u to ofproto (Address family not supported by protocol).  See
> > ovs-vswitchd log for details.
> > ovs-vsctl: The default log directory is "/usr/local/var/log/openvswitch".
> > yangtony1999 at yangtony1999:~/mosaic5g/ovs-gtp$ sudo ovs-vsctl
> > show568a1f72-0e94-4c16-a8fd-ef9218a97ccb
> >     Bridge edge
> >         Controller "tcp:192.168.12.42:6653"
> >         Port edge
> >             Interface edge
> >                 type: internal
> >         Port "s1u"
> >             Interface "s1u"
> >                 type: gtp
> >                 options: {key=flow, remote_ip=flow}
> >                 error: "could not add network device s1u to ofproto
> > (Address family not supported by protocol)"
> >         Port "enp68s0"
> >             Interface "enp68s0"
>
> What's in the log?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.openvswitch.org/pipermail/ovs-discuss/attachments/20210614/c1a89952/attachment.html>